The demolition sector generates a large amount of timber waste that could be directly reused or recycled in other products for structural purposes. Timber should be graded before it is used for structural purposes, and visual strength grading standards designed for new timber do not properly grade recovered timber. Cross Laminated Timber (CLT) is now one of the most common wood products used in construction. CLT would therefore be a good option for recycling timber due to the high quantity of material used in CLT manufacturing. This paper investigates the possibilities of using recovered timber from demolition to manufacture CLT. Twelve CLT panels from recovered and new timber were manufactured and tested. The static modulus of elasticity was found to be the same between recovered and new timber, while the bending strength of CLT from recovered timber was lower than it was for CLT from new timber. Non-destructive testing for the estimation of mechanical properties of boards and CLT panels was successfully developed.