In October 2007 a series of seismic tests were carried out on a 7-storey building made of cross laminated (XLam) wooden panels in natural scale on a shaking table E-Defence in Japan within the SOFIE project. The paper presents calculation procedure, prediction of dynamic behaviour of the tested structure excited by the earthquake record "Kobe JMA 1995" and comparison between predicted, that means calculated and measured response. Due to blind prediction approach some construction details were not known before dynamic time history response calculation. Therefore some assumptions, engineering judgment and rough static analyses were needed to define all construction parts which were in modelling approach assumed as important and could have had influence on dynamic response of the analyzed structure. The most important assumptions related to the definition of the stiffness and load bearing capacity of mechanical connections, types of anchors and their positions in each floor level, were determined on the basis of static analysis where the structure was loaded with equivalent horizontal seismic forces and then were used in dynamic analysis. A mathematical model was developed in program SAP2000 where modal and time history analyses were carried out. Comparison of calculated and measured results is described and evaluated on the basis of the model assumptions and its simplification.