A long term laboratory investigation on two six-meter-span timber composite beams was started from March 2012 at the University of Technology Sydney. These timber composites were made of laminated veneer lumber (LVL). The web and the flanges of the composite timber section were connected using screw-gluing technique. The specimens have been under sustained loads of (2.1kPa) and the environmental conditions was cyclically alternated between normal and very humid conditions whilst the temperature remained quasi constant (22 °C) –typical cycle duration was six to eight weeks. With regard to EC 5, the environmental conditions can be classified as service class 3 where the relative humidity of the air exceeds 85% and the moisture content of the timber samples reaches 20%. During the test, the mid-span deflection, moisture content of the timber beams and relative humidity of the air were continuously monitored. The paper presents the results and observations of the long-term test to-date and the test is continuing.