Project contact is Mariapaola Riggio at Oregon State University
Earthquake engineers are focusing on performance-based design solutions that minimize damage, downtime, and dollars spent on repairs by designing buildings that have no residual drift or “leaning” after an event. The development of timber post-tensioned (PT), self-centering rocking shear walls addresses this high-performance demand. The system works by inserting unbonded steel rods or tendons into timber elements that are prestressed to provide a compressive force on the timber, which will pull the structure back into place after a strong horizontal action. But, because these systems are less than fifteen years old with just four real-world applications, little information is known regarding best practices and optimal methods for engineering design, construction and/or tensioning procedures, and long-term maintenance considerations. This project intends to contribute knowledge by testing both cross-laminated timber (CLT) and mass plywood panel (MPP) walls through testing of anchorage detailing, investigating tensioning procedures for construction, determining the contributions of creep on prestress loss over time, and comparing all laboratory test data to monitoring data from three of the four buildings in which this technology has been implemented, one of which is George W. Peavy Hall at Oregon State University. This will be accomplished by testing small- and full-scale specimens in the A.A. “Red” Emmerson Advanced Wood Products Laboratory, and small-scale specimens in an environmental chamber.