Project contact is Christian Dagenais at Université Laval (Canada)
The use of materials in a building is traditionally determined from its combustibility (via ULC S114 or ULC S135) and by its flame propagation index (via ULC S102). The ULC S102 Flame Spread Test, developed in 1943, has historically reduced risk through its method of classifying materials. However, this test does not provide quantitative information on the combustion properties of materials, such as heat flow. The latter is one of the most important variables in the development of a fire. Thus, a new approach would be preferable in order to review the classification of materials according to ULC S102 and ULC S135 (cone calorimeter). The objective of this project is to develop a new approach to classifying materials based on cone calorimeter test results. These results can subsequently be used in numerical modeling as part of a fire safety engineering design. A significant amount of cone calorimeter (ULC S135) testing of materials currently evaluated according to ULC S102 will be required.