The characterization of the behaviour of connectors used in Cross-laminated Timber (CLT) structures is an important aspect that needs to be considered in their seismic design. In this paper, the data from shear and axial tests conducted on connectors have been used to define their force-displacement curves under cyclic loads using the SAWS model in OpenSees. The component curves were then incorporated into the corresponding wall models and the results were compared with their experimental counterparts, in order to determine the validity of the finite element model. Thereby, the non-linear behaviour was restricted to the connectors while the walls themselves were composed of linear orthotropic shell elements. The models were found to provide a good estimate of the initial stiffness and maximum load capacity of the wall specimens. The effects of vertical loading and the presence of openings were determined based on analyses run on the calibrated model.