The objective of this work is to generate fire resistance data for NLT assemblies to address significant gaps in technical knowledge. This research will support designers and builders in the use of mass timber assemblies in larger and taller buildings, as well as provide scientific justification for Authorities Having Jurisdiction (AHJ) to review and accept this construction method. The intent is to demonstrate that NLT construction can meet or exceed NBCC fire safety requirements for use in buildings of mass timber construction.
The data could be used towards the inclusion of an NLT fire resistance calculation methodology into Annex B of CSA 086 - Engineering Design for Wood, which currently addresses only glue-laminated timber (GLT), structural composite lumber (SCL) and cross-laminated timber (CLT).
The objective of this work is to generate fire performance data for NLT assemblies to address gaps in technical knowledge. This project aims to study how the size of gaps between NLT boards might affect charring of an assembly and its overall fire performance. This research will support designers and builders in the use of mass timber assemblies in larger and taller buildings, by ensuring fire safe designs.
The objective of this project is to establish fundamental fire performance data for the design and specification of NLT assemblies; this project specially addresses determining FSRs for NLT. The goal of this project is to confirm that NLT, when used as a mass timber element, has a lower FSR than standard thickness SPF boards when tested individually and flatwise. The project also considers how the surface profiles, design details, and the direction of an assembly might influence flame spread. This includes the evaluation of typical architectural features, such as a 'fluted' profile.
The objective of the two tests described in this report was to evaluate the performance of cross-laminated timber (CLT) and nail laminated timber (NLT) construction protected with two layers of %-in. (16-mm) type X gypsum board when exposed to the therma...
This Design and Construction Guide (the Guide) provides the Canadian design and construction industry with immediate support and guidance to ensure safe, predictable, and economical use of NLT. It is intended to offer practical strategies, advice, and guidance, transferring knowledge and lessons learned from those with experience.
This Guide focuses on design and construction considerations for floor and roof systems pertaining to current Canadian construction practice and standards. While NLT is being used for vertical elements for walls, stair shafts, and elevator shafts, this Guide provides the greatest depth of direction for common horizontal applications. The information included here is supplemental to wood design and construction best practices and is specific to the application of NLT. Built examples are included to illustrate real application and visual reference as much as possible.
Currently the massive timber shear walls are mainly made from Cross Laminated Timber (CLT), which possesses a high in-plane shear strength and rigidity. But only part of its elements (mainly the vertically aligned laminae) are engaged in carrying the vertical load and that could be a limitation when designing taller timber structures or wherever higher...