Skip header and navigation

22 records – page 1 of 3.

Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: Exit Fire Separations in Mid-Rise Wood Buildings

https://research.thinkwood.com/en/permalink/catalogue1879
Year of Publication
2018
Topic
Fire
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Shafts and Chases
Author
Ranger, Lindsay
Dagenais, Christian
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Shafts and Chases
Topic
Fire
Keywords
National Building Code of Canada
Combustible Material
Mid-Rise
Noncombustible Construction
Language
English
Research Status
Complete
Summary
FPInnovations initiated this project to demonstrate the ability of wood exit stairs in mid-rise buildings to perform adequately in a fire when NBCC requirements are followed, with the intent of changing perceptions of the fire safety of wood construction. The objective of this research is to investigate further the fire safety afforded by exit stair shafts of combustible construction, with the ultimate objective of better consistency between the provincial and national building codes with respect to fire requirements for exit stair shafts in mid-rise wood-frame construction.
Online Access
Free
Resource Link
Less detail

Blast Testing of Loaded Mass Timber Structures

https://research.thinkwood.com/en/permalink/catalogue1164
Year of Publication
2018
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Walls

Concrete Composite Floors Using Radiant Panel Tests

https://research.thinkwood.com/en/permalink/catalogue2259
Topic
Fire
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Floors
Organization
TallWood Design Institute
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Floors
Topic
Fire
Keywords
Mass Timber
Acoustics
Vibration
Research Status
In Progress
Notes
Contact: Erica Fischer, Oregon State University
Summary
In many mass timber buildings, CLT or nail laminated timber (NLT) floors are designed with a concrete topping to improve acoustic separation, reduce vibration or act as a fire barrier. Little research has examined the fire behavior of these floor systems, but some preliminary tests involving LVL show that they may be able to meet three-hour fire resistance ratings, which could potentially open up the use of mass timber in Type I buildings, representing a large market opportunity. This project will test the behavior of composite floors under fire loading conditions considering the following parameters: shear connector type, mass timber panel types and thicknesses and concrete thicknesses. It will also test and validate an innovative fire research methodology using radiant panels.
Less detail

Encapsulated Mass Timber Construction: Guidelines for Encapsulation Details and Techniques

https://research.thinkwood.com/en/permalink/catalogue2600
Year of Publication
2019
Topic
Design and Systems
Fire
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Author
Ranger, Lindsay
Geraghty, Simon
Jeske, Judy
Rahmani, Alma
Dorsey, Cheryl
Organization
FPInnovations
Year of Publication
2019
Country of Publication
Canada
Format
Guides
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Design and Systems
Fire
Keywords
Encapsulated Mass Timber Construction
EMTC
Fire Protection
Construction Safety
Language
English
Research Status
Complete
Summary
he purpose of this guide is to provide an introduction to the concept of encapsulated mass timber construction. This guide provides an overview of encapsulation techniques for mass timber construction, and other related fire protection measures, and summarizes some approved encapsulation materials and application methods and identifies additional requirements for safety during construction. This guide is intended to help architects, engineers and designers by reducing uncertainty and allowing for more confidence in design, as well as providing authorities having jurisdiction and inspectors with a reference for simple design review. Funded by Ontario Ministry of Natural Resources and Forestry through FPInnovations with Morrison Hershfield Limited
Online Access
Free
Resource Link
Less detail

Encapsulation of Mass Timber Floor Surfaces

https://research.thinkwood.com/en/permalink/catalogue2528
Year of Publication
2020
Topic
Design and Systems
Fire
Material
NLT (Nail-Laminated Timber)
Glulam (Glue-Laminated Timber)
CLT (Cross-Laminated Timber)
Application
Floors

Evaluating Fire Performance of Nail-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue2092
Year of Publication
2019
Topic
Fire
Material
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Author
Ranger, Lindsay
Dagenais, Christian
Bénichou, Noureddine
Organization
FPInnovations
Year of Publication
2019
Country of Publication
Canada
Format
Report
Material
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Fire
Keywords
Fire Resistance
NBCC
Fire Safety
Language
English
Research Status
Complete
Summary
The objective of this work is to generate fire resistance data for NLT assemblies to address significant gaps in technical knowledge. This research will support designers and builders in the use of mass timber assemblies in larger and taller buildings, as well as provide scientific justification for Authorities Having Jurisdiction (AHJ) to review and accept this construction method. The intent is to demonstrate that NLT construction can meet or exceed NBCC fire safety requirements for use in buildings of mass timber construction. The data could be used towards the inclusion of an NLT fire resistance calculation methodology into Annex B of CSA 086 - Engineering Design for Wood, which currently addresses only glue-laminated timber (GLT), structural composite lumber (SCL) and cross-laminated timber (CLT).
Online Access
Free
Resource Link
Less detail

Evaluating Fire Performance of Nail-Laminated Timber: Influence of Gaps

https://research.thinkwood.com/en/permalink/catalogue2093
Year of Publication
2019
Topic
Fire
Material
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Author
Ranger, Lindsay
Dagenais, Christian
Organization
FPInnovations
Year of Publication
2019
Country of Publication
Canada
Format
Report
Material
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Fire
Keywords
Charring
Gaps
Language
English
Research Status
Complete
Summary
The objective of this work is to generate fire performance data for NLT assemblies to address gaps in technical knowledge. This project aims to study how the size of gaps between NLT boards might affect charring of an assembly and its overall fire performance. This research will support designers and builders in the use of mass timber assemblies in larger and taller buildings, by ensuring fire safe designs.
Online Access
Free
Resource Link
Less detail

Evaluating Fire Performance of Nail-Laminated Timber: Surface Flammability

https://research.thinkwood.com/en/permalink/catalogue2094
Year of Publication
2019
Topic
Fire
Design and Systems
Material
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Author
Ranger, Lindsay
Dagenais, Christian
Organization
FPInnovations
Year of Publication
2019
Country of Publication
Canada
Format
Report
Material
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Fire
Design and Systems
Keywords
Flame Spread
Fire Safety
Language
English
Research Status
Complete
Summary
The objective of this project is to establish fundamental fire performance data for the design and specification of NLT assemblies; this project specially addresses determining FSRs for NLT. The goal of this project is to confirm that NLT, when used as a mass timber element, has a lower FSR than standard thickness SPF boards when tested individually and flatwise. The project also considers how the surface profiles, design details, and the direction of an assembly might influence flame spread. This includes the evaluation of typical architectural features, such as a 'fluted' profile.
Online Access
Free
Resource Link
Less detail

Evaluation of Bending Performance of Nail Laminated and Dowel Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue2309
Year of Publication
2019
Topic
Design and Systems
Mechanical Properties
Material
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Application
Floors
Walls
Roofs
Bridges and Spans
Wood Building Systems
General Application

Evaluation of Retrofit Procedures for Nail-Laminated and Stringer Bridges

https://research.thinkwood.com/en/permalink/catalogue1434
Year of Publication
2002
Topic
Mechanical Properties
Material
NLT (Nail-Laminated Timber)
Application
Bridges and Spans

22 records – page 1 of 3.