Salvaged timber elements often have length limitations, and therefore, their reuse in structural products normally would require additional processing and end-to-end joining. This increases the costs of reusing such materials, which makes them even less attractive to the timber sector. In the presented research, a new approach is proposed for reusing short, salvaged timber elements combined with new (full-scale) timber boards to fabricate dowel-laminated timber (DLT) panels without significant processing or end-to-end joining or gluing. In this approach, salvaged timber elements are pressed in the system in such a way that they can contribute to the bending performance of the DLT panels by resisting compression stress. In order to evaluate the effectiveness, several small-scale and large-scale DLT panels were fabricated. Salvaged plywood tenons were used as connectors. The bending stiffness of the small-scale DLT panels and the first eigenfrequency, damping ratio, bending properties, and failure modes of the large-scale DLT panels were evaluated. The results exhibited that by using the proposed approach, the short, salvaged timber elements can contribute substantially to the bending stiffness of the DLT panels without requiring end-to-end joining or gluing. On average, about a 40% increase in the bending stiffness could be achieved by pressing in the salvaged timber elements, which results in relatively similar stiffness properties compared to conventional DLT panels. One further characteristic is that the failure of the panels, and therefore the panel’s strength, is mainly governed by the quality of the full-scale timber boards instead of the salvaged ones. This can be beneficial for practical use as the qualitative assessment of the strength properties of salvaged timber becomes less critical.
The use of timber in construction in medium–high rise construction has increased in recent years largely due to the significant innovation in engineered wood products and connection technology coupled with a desire to utilise more environmentally sustainable construction materials. While engineered wood products offer a low-carbon solution to the construction industry, the widespread use of adhesive and metallic fasteners often limits the recyclability of the structural components at the end of life of the structure and it may be beneficial to reduce this where possible.
To establish the possibility of an all-wood connection solution, this preliminary study examines a series of beam-column connections designs to evaluate the relative performance of the different designs, which are connected with modified or compressed wood (CW) connectors. The connection designs are formed between glued-laminated beam and column members in the first instance and later examined when connecting dowel-laminated timber (DLT) members.
The results show that significant moment capacity and rotational stiffness can be achieved for connections solely connected using CW fasteners. Furthermore, the all-wood solution utilising CW fasteners to connect DLT members has also demonstrated significant moment capacity and rotational stiffness capacity without the use of adhesive and metallic components.
These Joint Professional Practice Guidelines – Encapsulated Mass Timber Construction Up to 12 Storeys were jointly prepared by the Architectural Institute of British Columbia (AIBC) and Engineers and Geoscientists British Columbia.
The AIBC and Engineers and Geoscientists BC regulate and govern the professions of architecture, engineering, and geoscience under the Architects Act and the Professional Governance Act. The AIBC and Engineers and Geoscientists BC each have a regulatory mandate to protect the public interest, which is met in part by setting and maintaining appropriate academic, experience, and professional practice standards.
Engineering Professionals are required per Section 7.3.1 of the Bylaws - Professional Governance Act to have regard for applicable standards, policies, plans, and practices established by the government or by Engineers and Geoscientists BC, including professional practice guidelines. For Engineering Professionals, these professional practice guidelines clarify the expectations for professional practice, conduct, and competence when providing engineering services for EMTC buildings. For Architects, these guidelines provide important information and identify issues to be considered when providing architectural services for EMTC buildings. These guidelines deal with the performance of specific activities in a manner such that Architects and Engineering Professionals can meet their professional obligations under the Architects Act and the Professional Governance Act.
These guidelines were developed in response to new classifications of building size and construction relative to occupancy introduced in the 2018 British Columbia Building Code (BCBC), under Division B, Article 3.2.2.48EMTC. Group C, up to 12 storeys, Sprinklered, and Article 3.2.2.57EMTC. Group D, up to 12 storeys, Sprinklered. These new classifications were introduced in Revision 2 of the 2018 BCBC on December 12, 2019 and in Amendment 12715 of the 2019 Vancouver Building By-law (VBBL) on July 1, 2020. Additionally, provisions related to Encapsulated Mass Timber Construction (EMTC) were introduced in Revision 1 of the 2018 British Columbia Fire Code (BCFC) on December 12, 2019.
These guidelines were first published in 2021 to provide guidance on architectural and engineering considerations relating to these significant changes to the 2018 BCBC, the 2019 VBBL, and the 2018 BCFC. For Engineering Professionals, these guidelines are intended to clarify the expectations of professional practice, conduct, and competence when Engineering Professionals are engaged on an EMTC building. For Architects, these guidelines inform and support relevant competency standards of practice to be met when Architects are engaged on an EMTC building.
As with all building and construction types, the EMTC-specific code provisions prescribe minimum requirements that must be met. The majority of EMTC of 7 to 12 storeys are considered High Buildings, and as such are subject to the BCBC, Subsection 3.2.6. Additional Requirements for High Buildings.
This manual is helpful for experts and novices alike. Whether you’re new to mass timber or an early adopter you’ll benefit from its comprehensive summary of the most up to date resources on topics from mass timber products and applications to tall wood construction and sustainability.
The manual’s content includes WoodWorks technical papers, Think Wood continuing education articles, case studies, expert Q&As, technical guides and other helpful tools. Click through to view each individual resource or download the master resource folder for all files in one handy location. For your convenience, this book will be updated annually as mass timber product development and the market are quickly evolving.
The development of this primer commenced shortly after the 2018 launch of the Mass Timber Institute (MTI) centered at the University of Toronto. Funding for this publication was generously provided by the Ontario Ministry of Natural Resources and Forestry. Although numerous jurisdictions have established design guides for tall mass timber buildings, architects and engineers often do not have access to the specialized building science knowledge required to deliver well performing mass timber buildings. MTI worked collaboratively with industry, design professionals, academia, researchers and code experts to develop the scope and content of this mass timber building science primer. Although provincially funded, the broader Canadian context underlying this publication was viewed as the most appropriate means of advancing Ontario’s nascent mass timber building industry. This publication also extends beyond Canada and is based on universally applicable principles of building science and how these principles may be used anywhere in all aspects of mass timber building technology. Specifically, these guidelines were developed to guide stakeholders in selecting and implementing appropriate building science practices and protocols to ensure the acceptable life cycle performance of mass timber buildings. It is essential that each representative stakeholder, developer/owner, architect/engineer, supplier, constructor, wood erector, building official, insurer, and facility manager, understand these principles and how to apply them during the design, procurement, construction and in-service phases before embarking on a mass timber building project.
When mass timber building technology has enjoyed the same degree of penetration as steel and concrete, this primer will be long outdated and its constituent concepts will have been baked into the training and education of design professionals and all those who fabricate, construct, maintain and manage mass timber buildings.
One of the most important reasons this publication was developed was to identify gaps in building science knowledge related to mass timber buildings and hopefully to address these gaps with appropriate research, development and demonstration programs. The mass timber building industry in Canada is still a collection of seedlings that continue to grow and as such they deserve the stewardship of the best available building science knowledge to sustain them until such time as they become a forest that can fend for itself.
This InfoNote summarizes recent research and work in progress. A significant amount of fire research has been conducted on mass timber over the last 10 years in Canada. This has supported the successful design and construction of numerous low-, mid-and even high-rise wood buildings. This has also fostered the introduction of new provisions into the National Building Code of Canada which has made wood and mass timber construction more accessible. However, the fire performance of these systems remains a concern for many potential occupants or owners of these buildings, not to mention building officials and fire departments. Research at FPInnovations continues to support designers and builders in the use of mass timber assemblies by ensuring fire safe designs.
Timber-concrete composite slabs are more and more in use: the combination of timber and concrete combines the advantages of both materials and offer a valid solution for the increasing demand for sustainable construction. The connection between timber and concrete is the crucial element, yet its potential regarding material and time expenses is not exploited. This paper presents the novel connection system micro-notches, an interlocking concept between timber and concrete with indentations in the millimetre range. Micro-notches provide a continuous shear transfer without additional steel fasteners such as screws or dowels. The paper presents the development of the micro-notch concept in an extensive experimental program supplemented with analytical and numerical models, a calculation model, and practice-relevant guidelines. The results of the investigations show that micro-notches feature an approximately rigid composite action between timber and concrete and a sufficient shear strength for the use in office and residential buildings.
The U.S. Mass Timber Construction Manual was developed to give contractors and installers a framework for the planning, procurement, and management of mass timber projects, and to provide a bridge from their experience with other systems. Mass timber is unique in that it draws installation techniques from other construction types, so people with concrete, precast, tilt-up, and structural steel experience can readily adapt to these materials. However, understanding how mass timber differs from other building systems is key to cost effectiveness.
The manual was produced with primary funding from the U.S. Endowment for Forestry and Rural Communities, in collaboration with WoodWorks’ mass timber manufacturing partners in the U.S. and Canada. While intended primarily for GCs and installers, it is a useful reference for all members of a mass timber project team and anyone interested in the construction of mass timber buildings.
The scope of this guide focuses on the design of mass timber floor systems to limit human-induced vibration. The primary performance goal is to help designers achieve a low probability of adverse comment regarding floor vibrations in a manner consistent with the vibration design guides for steel and concrete systems. This includes excitation primarily from human walking as observed by other people in the building. Some treatment of design for sensitive equipment in response to human walking is also discussed. This design guide covers the range of currently available mass timber panels, including cross-laminated timber (CLT) manufactured from either solid sawn or structural composite lumber (SCL) laminations, nail-laminated timber (NLT), dowel laminated timber (DLT) and glue-laminated timber (GLT), as well as their support framework of timber beams.
The target user of this guide is a design professional with working knowledge of mass timber structural design and some background knowledge of structural dynamics as related to floor vibrations. It may be particularly useful to design engineers with limited experience with vibration analysis, experienced multi-material engineers familiar with vibration analysis but unfamiliar with mass timber vibration, and applications engineers assisting manufacturers in the development of solutions and proposals for projects.
This paper is intended for developers and owners seeking to purchase insurance for mass timber buildings, for design/construction teams looking to make their designs and installation processes more insurable, and for insurance industry professionals looking to alleviate their concerns about safety and performance.
For developers, owners and design/construction teams, it provides an overview of the insurance industry, including its history, what affects premiums, how risks are analyzed, and how project teams can navigate coverage for mass timber buildings. Insurance in general can seem like a mystery—what determines premium fluctuations, impacts of a strong vs. weak economy, and the varying roles of brokers, agents and underwriters. This paper will explain all of those aspects, focusing on the unique considerations of mass timber projects and steps that can be taken to make these buildings more insurable.
For insurance brokers, underwriters and others in the industry, this paper provides an introduction to mass timber, including its growing use, code recognition and common project typologies. It also covers available information on fire performance and post-fire remediation, moisture impacts on building longevity, and items to watch for when reviewing specific projects.
