Skip header and navigation

19 records – page 1 of 2.

An Equivalent Truss Method for the Analysis of Timber Diaphragms

https://research.thinkwood.com/en/permalink/catalogue112
Year of Publication
2015
Topic
Design and Systems
Mechanical Properties
Material
Light Frame (Lumber+Panels)
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Glulam (Glue-Laminated Timber)
Application
Floors

Behaviour and Design of Timber-Wood Lightweight Concrete-Composite Floor Systems

https://research.thinkwood.com/en/permalink/catalogue1983
Year of Publication
2018
Topic
Design and Systems
Mechanical Properties
Material
Timber-Concrete Composite
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Application
Floors

Cathedral Hill 2: Challenges in the Design of a Tall All-Timber Building

https://research.thinkwood.com/en/permalink/catalogue1660
Year of Publication
2016
Topic
Design and Systems
Seismic
Wind
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Author
Kevin Below
Francesco Sarti
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Topic
Design and Systems
Seismic
Wind
Keywords
Pres-Lam
Dynamic Behaviour
Nonlinear Time History Analysis
Wind Loading
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 3633-3640
Abstract
The paper presents the design and modelling of Cathedral Hill 2, a 15-storey timber building, planned for construction in Canada. The building is a 59-metre tall office-use construction with an all-timber structure where the lateral-load-resisting system consists of segmented Pres-Lam walls...
Online Access
Free
Resource Link
Less detail

The Challenges for Designers of Tall Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue1489
Year of Publication
2016
Topic
Design and Systems
Fire
Seismic
Wind
Material
Glulam (Glue-Laminated Timber)
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Author
Andrew Buchanan
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Topic
Design and Systems
Fire
Seismic
Wind
Keywords
Fire Safety
Seismic Load
Wind Load
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 124-133
Abstract
This paper describes several major challenges facing the designers of tall timber buildings. “Tall” in this context generally means 10 storeys or more, although many of the challenges also apply to timber buildings over 4 or 6 storeys, becoming more severe as the buildings get taller...
Online Access
Free
Resource Link
Less detail

Composite Cross Laminated Timber (CCLT) Made with Engineered Wood Products (EWP) and Hardwood

https://research.thinkwood.com/en/permalink/catalogue1578
Year of Publication
2016
Topic
Design and Systems
Cost
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Application
General Application
Author
Jean-Frédéric Grandmont
Brad Wang
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Application
General Application
Topic
Design and Systems
Cost
Mechanical Properties
Keywords
Dimensional Stability
SPF
Birch
Aspen
Maple
Equilibrium Moisture Content
Delamination
Bond Line
Manufacturing
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 1723-1730
Abstract
North American cross laminated timber is currently made of softwood lumber following the guidelines of the ANSI/APA PRG-320 manufacturing standard. In this study, the potential of manufacturing CLT panels using various hardwood species and engineered wood products (EWP) was investigated for their compatibility and the impact...
Online Access
Free
Resource Link
Less detail

Development of Steel-Timber Composite System for Large Scale Construction

https://research.thinkwood.com/en/permalink/catalogue1696
Year of Publication
2016
Topic
Mechanical Properties
Connections
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Beams
Author
Amirhossein Hassanieh
Hamid Valipour
Mark Bradford
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Beams
Topic
Mechanical Properties
Connections
Keywords
Short-term
Ultimate Limit States
Push-Out Tests
Failure Modes
Four Point Bending Test
Strength
Stiffness
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 4322-4331
Abstract
In this paper a novel and efficient structural system, that comprises steel beams and prefabricated timber slabs is developed and tested under short-term service and ultimate limit state loading conditions. In the proposed steeltimber composite (STC) system, bolt and coach screws are employed to transfer shear between steel beam and...
Online Access
Free
Resource Link
Less detail

Displacement-Based Seismic Design of Timber Structures

https://research.thinkwood.com/en/permalink/catalogue1891
Year of Publication
2011
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
LVL (Laminated Veneer Lumber)
Other Materials
Application
Wood Building Systems
Walls
Floors
Beams
Columns
Frames

Ductility and Overstrength of Dowelled LVL and CLT Connections Under Cyclic Loading

https://research.thinkwood.com/en/permalink/catalogue1504
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
General Application
Author
Lisa-Mareike Ottenhaus
Minghao Li
Tobias Smith
Pierre Quenneville
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
General Application
Topic
Connections
Mechanical Properties
Keywords
Ductility
Overstrength
Cyclic Loading
Monotonic Loading
Dowels
Ductile Failure
Brittle Failure
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 325-333
Abstract
This paper presents an experimental study on ductility and overstrength of dowelled connections. Connection ductility and overstrength derived from monotonic testing are often used in timber connection design in the context of seismic loading, based on the assumption that these properties are similar under monotonic and cyclic loading...
Online Access
Free
Resource Link
Less detail

Dynamic Analysis of the FFTT System

https://research.thinkwood.com/en/permalink/catalogue138
Year of Publication
2014
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems

Earthquake Resistant Design and Sustainability through Wooden Composites in Multi-Storey Structures

https://research.thinkwood.com/en/permalink/catalogue148
Year of Publication
2014
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Author
Aygül Ceylan
Z. Canan Girgin
Organization
European Association of Earthquake Engineering
Year of Publication
2014
Country of Publication
Turkey
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Topic
Design and Systems
Seismic
Keywords
Multi-Storey
Canada
Italy
New Zealand
Wooden Structural Systems
Wooden-Hybrid Structural Systems
Post-Tensioning
Connections
Sustainability
Language
English
Conference
Second European Conference on Earthquake Engineering and Seismology
Research Status
Complete
Notes
August 25-29, 2014, Istanbul, Turkey
Online Access
Free
Resource Link
Less detail

19 records – page 1 of 2.