A. Shop Drawings and Details for Tests
B. Sound and Impact Test Results Summary
C. Test 1: Sound and Impact Transmission Test - CLT
D. Test 2: Sound and Impact Transmission Test - Concrete Topping
E. Test 3a: Sound and Impact Transmission Test - Marmoleum
F. Test 3b: Sound and Impact Transmission Test - Marmoleum
G. Test 4: Sound and Impact Transmission Test - Carpet
H. Test 5a: Sound and Impact Transmission Test - Luxury Vinyl Plank
I. Test 5b: Sound and Impact Transmission Test - Luxury Vinyl Plank
J. Test 6: Sound and Impact Transmission Test - Mechanical Roof
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Serviceability performance studied covers three different performance attributes of a building. These attributes are 1) vibration of the whole building structure, 2) vibration of the floor system, typically in regards to motions in a localized area within the entire floor plate, and 3) sound insulation performance of the wall and floor assemblies...
The ambient movement of three modern multi-storey timber buildings has been measured and used to determine modal properties. This information, obtained by a simple, unobtrusive series of tests, can give insights into the structural performance of these f...
This paper discusses the impact of the natural frequency of multi-storey timber structures, focusing on force-based seismic design. Simplified approaches to determine the frequency of light-frame and cross-laminated timber structures are investigated. How stiffness parameters for simple two-dimensional analysis models can be derived from the different contributions of deformation...
The intent of this Chapter is to answer simple questions related to the definition of sound, its sources, quantification and methods of measurement, acceptable levels of sound, differences between sound and noise, etc. Of course, when verbalizing such questions, the solutions for sound control will be naturally unfolded to readers. This Chapter is intended to thoroughly separate myth from reality. The Chapter also introduces the International Building Code (IBC) requirements for sound insulation in buildings. State of the art construction details for CLT walls and floor/ceiling assemblies generally meeting IBC requirements are provided herein and are based on results of tests performed in various laboratories in the world and in the field by FPInnovations. A step by step construction practices guide then leads the reader towards the final goal, which is the occupants' satisfaction. We expect that after reading this Chapter, the reader will be in a position to acknowledge that CLT buildings can achieve satisfactory sound insulation levels if proper design and installation are followed. Note that, considering the short history of CLT construction, the journey is only beginning.
The current interest and growth of cross laminated timber (CLT) products has spurred interest in the manufacture of CLTs in the United States. The purpose of this paper is to explore the development of CLT materials from southern pine lumber commonly ava...