Provincial code changes have been made to allow construction of light wood-frame buildings up to 6 storeys in order to satisfy the urban housing demand in western Canadian cities. It started in 2009 when the BC Building Code was amended to increase the height limit for wood-frame structures from four to six. Recently, provinces of Quebec, Ontario and Alberta followed suit. While wood-frame construction is limited to six storeys, some innovative wood-hybrid systems can go to greater heights. In this report, a feasibility study of timber-based hybrid buildings is described as carried out by The University of British Columbia (UBC) in collaboration with FPInnovations. This project, funded through BC Forestry Innovation Investment's (FII) Wood First Program, had an objective to develop design guidelines for a new steel-timber hybrid structural system that can be used as part of the next generation "steel-timber hybrid structures" that is limited in scope to 20 storey office or residential buildings. ...
This paper discusses the state-of-the-art of displacement-based seismic design (DBD) methods and their applications to timber buildings. First, an in-depth review of the DBD methods is presented, focusing in particular on the direct, modal and N2 methods. Then, paper presents DBD application on a wide range of construction systems, including both traditional light-frame structures as well as the emerging sector of tall and hybrid timber buildings. Finally, potentials of using these DBD methods for seismic design as well as possible implications of including DBD within the next generation of building codes are discussed.
Advancement in engineered wood products altered the existing building height limitations and enhanced wooden structural members that are available on the market. These coupled with the need for a sustainable and green solution to address the ever-growing urbanization demand, avails wood as possible candidate for primary structural material in the construction industry. To this end, several researches carried out in the past decade to come up with sound structural solutions using a timber based structural system. Green and Karsh (2012) introduced the FFTT system; Tesfamariam et al. (2015) developed force-based design guideline for steel infilled with CLT shear walls, and SOM (2013) introduced the concrete jointed mass timber hybrid structural concepts. In this research, the basic structural concepts proposed by SOM (2013) is adopted. The objective of this research is to develop a wind and earthquake design guideline for concrete jointed tall mass timber buildings in scope from 10- to 40-storey office or residential buildings. The specific objective of this research is as follow:
Wind serviceability design guideline for hybrid mass-timber structures.
Calibration of design wind load factors for the serviceability wind design of hybrid tall mass timber structures.
Guidelines to perform probabilistic modeling, reliability assessment, and wind load factor calibration.
Overstrength related modification factor Ro and ductility related modification factor Rd for future implementation in the NBCC.
Force-based design guideline following the capacity based design principles.