Project contact is Thomas Miller at Oregon State University
Understanding how roof and floor systems (commonly called diaphragms by engineers) that are built from Pacific Northwest-sourced cross-laminated timber (CLT) panels perform in earthquake prone areas is a critical area of research. These building components are key to transferring normal and extreme event forces into walls and down to the foundation. The tests performed in this project will provide data on commonly used approaches to connecting CLT panels within a floor or roof space and the performance of associated screw fasteners. Structural engineers will directly benefit through improved modeling tools. A broader benefit may be increased confidence in the construction of taller wood buildings in communities at greater risk for earthquakes.
Project contact is André Barbosa at Oregon State University
This project develops benchmark data needed to generate design guidelines for structural engineers to calculate strength & stiffness of CLT-diaphragms, with and without concrete toppings. The project includes a full-scale test of a two-story mass timber building at the UC San Diego shake table in collaboration with the larger project, “Development and Validation of a Resilience-based Seismic Design Methodology for Tall Wood Buildings” which features collaborators from throughout the western US and is funded by the Natural Hazards Engineering Research Infrastructure (NHERI) program of the National Science Foundation.
Project contact is Christopher Higgins at Oregon State University
This project will optimize the strength, stiffness, vibration characteristics, acoustic qualities and fire resistance of cross-laminated floor systems utilizing a composite concrete and cross-laminated timber product. This project includes development, testing and optimization of an economical shear connector (to connect the CLT panel to the concrete slab) that will be compared with existing screw and steel plate solutions. The resulting prototype floor system will be tested at full scale.
Project contact is Arijit Sinha at Oregon State University
Constructing buildings with CLT requires development of novel panel attachment methods and mechanisms. Architects and engineers need to know the engineering strength properties of connected panels, especially in an earthquake prone area. This project will improve knowledge of three types of wall panel connections: wall-to-floor, wall-to-wall, and wall-to-foundation. Testing will determine the strength properties of metal connectors applied with diffferent types and sizes of screw fasteners. The data will be used to develop a modeling tool that engineers can use when designing multi-story buildings to be constructed with CLT panels.
In many mass timber buildings, CLT or nail laminated timber (NLT) floors are designed with a concrete topping to improve acoustic separation, reduce vibration or act as a fire barrier. Little research has examined the fire behavior of these floor systems, but some preliminary tests involving LVL show that they may be able to meet three-hour fire resistance ratings, which could potentially open up the use of mass timber in Type I buildings, representing a large market opportunity. This project will test the behavior of composite floors under fire loading conditions considering the following parameters: shear connector type, mass timber panel types and thicknesses and concrete thicknesses. It will also test and validate an innovative fire research methodology using radiant panels.
This project will document the flammability of Douglas-fir and spruce-pine-fir CLT panel assemblies produced in the United States. Tests are being conducted on wall and floor panel assemblies with standard overlapping connections and produced with two different types of commonly-used adhesives. Sensors placed throughout panels will provide data about how fire affects the interior and exterior of a panel. A thermal imaging camera will provide information on how the structural integrity of panels is affected by fire and fire suppression activities.
The project will take the connection systems from the Composite CLT-Concrete Floor Systems for Tall Building Design project and test them over elevated temperatures to evaluate strength properties as well as how the stiffness and strength degrade at different levels of elevated temperatures. This information will be implemented into fire models and will help to predict things like failure time.
This project aims to develop a commercially-viable wood adhesive for CLT that is free of formaldehyde and isocyanates and possesses good cure speed properties. Li and his team have successfully developed adhesives for plywood manufacturing using abundant, inexpensive and renewable soy flour. This adhesive mimics the superior bonding properties of mussel additive proteins. Emission of hazardous air pollutants from plywood plants that use this adhesive has dropped 50-90 percent. Development of such an adhesive for CLT would address increasingly stringent air quality regulations in many places such as Oregon and California. The existing chemical formulation for the plywood adhesive will be adapted for use in a cold-pressing process. Specimens will be created at the OSU wood composites labs and first tested to verify conformance with the PRG320 product standard for CLT. Specimens passing the tests will be sent to the Energy Studies in Buildings Laboratory at the University of Oregon, Portland, where they will be conditioned and tested to determine emission characteristics.
The City of Springfield, Oregon hired SRG Partnership to design a CLT parking structure slated to be built in a new redevelopment zone on the Willamette River. The concept started as an academic exercise in a University of Oregon architectural design studio course led by Professor Judith Sheine. Mayor Christine Lundberg saw an opportunity to connect Springfield’s historic roots in the timber industry to the burgeoning new mass timber sector, and the project became a reality. Before the structure is built, important technical questions must be addressed concerning how to protect the timber elements against the Pacific Northwest weather and long-term dynamic loading from vehicles. A technical team from OSU’s Department of Wood Science and Engineering and School of Civil and Construction Engineering are narrowing down combinations of materials for testing. Proposed solutions include an asphalt topping on the CLT decking, similar to those often used on timber bridge decks. Stress tests will be conducted, simulating forces from vehicles turning, starting and stopping and backing up. Simulated weather testing will also be conducted in OSU’s multi-chamber modular environmental conditioning chamber. The Energy Studies in Buildings Laboratory at University of Oregon has conducted wind-driven rain studies to inform SRG’s design of the roof and exterior screening elements.
Resilient structures are buildings designed not only to protect life safety in a seismic event but also to preserve the structural integrity of the major components of the buildings so that they can be reoccupied quickly and at minimal cost. An example is a CLT rocking wall system, utilizing post-tensioned cables and energy dissipating-connectors, which is being used for the first time in North America in OSU’s new Peavy Hall. CLT rocking walls borrow from concepts used in concrete and steel structures that were later adapted to LVL building systems in New Zealand. This project will examine the impacts of wetting at the base of the wall on the structural capacity and cyclic performance of the system. Identical rocking wall systems will undergo structural testing, with one being subjected to simulated moisture intrusion that may occur during construction. The findings will provide important information that can be later implemented in design and construction guidelines.