Timber-concrete composite structures were originally developed for upgrading existing timber oors, but during last decades, they have new applications in multistorey buildings. Most of the research performed on these structures has focused on systems in which wet concrete is cast on top of timber beams with mounted connectors. Recently investigations on composite systems were performed at Luleå University of Technology in Sweden, in which the concrete slab is prefabricated off-site with the connectors already embedded and then connected on-site to the timber joists. Similar studies have been carried out also on timber-concrete composite structures with prefabricated FRC slabs at Lund University in Sweden. Two kinds of shear connectors were incorporated in the prefabricated FRC concrete slabs. These last systems can be considered globally as partially prefabricated structures because only the slabs were cast off-site with already inserted shear connectors and then the connection with the timber beams is done on the building site. An innovative composite system for floor applications is presented in this thesis. The entire structure is prefabricated off-side, transported and direct mounted to the building on site, that can be seen as full prefabricated structures. Noticeable benefits of a full prefabricated structure are that the moving work from the building site to the workshop reduces construction costs, is more simple and fast of manufacture and erect, and of sure, has better quality, that means more durability. Self-tapping full-threaded screws to connect concrete slabs to timber beam were used. Dimensions of the composite beams and the spacing between the screws has been chosen by discussing different FE model in order to reach the optimal solution. The experimental campaign included:
(i) two short-time bending tests carried out on two dierent full-scale specimens,
(ii) dynamic tests conducted on one full-scale specimen,
(iii) long-time bending test carried out on one full-scale specimen,
(iv) compression tests on three cubes of concrete,
(v) nine withdrawal tests of the screws with different depth in the concrete.
The results of the experimental tests show that the composite beams have a very high level of resistance and stiffness and also allow to reach a high degree of efficiency. Last, comparisons between FE results, analytical calculations and experimental values have been performed and from them it can be concluded that FE model and theoretical calculations well interpret the behavior of the composite structure and provide reliable results.