Skip header and navigation

2 records – page 1 of 1.

Advanced Quality and In-Service Condition Assessment Procedures for Mass Timber and Cross-Laminated Timber Products

https://research.thinkwood.com/en/permalink/catalogue2558
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Organization
Forest Products Laboratory
Mississippi State University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Topic
Mechanical Properties
Keywords
Non-Destructive Evaluation
Bond Performance
Monitoring Techniques
Serviceability
Quality Assurance
Research Status
In Progress
Notes
Project contacts are Frederico França at Mississippi State University and Robert J. Ross at the Forest Products Laboratory
Summary
With the rapid development of CLT manufacturing capacity around the world and the increasing architectural acceptance and adoption, there is a current and pressing need regarding adhesive bond quality assurance in manufacturing. As with other engineered glued composites, adhesive bondline performance is critically important. Bondline assessment requires technology in the form of sensors, ultrasonics, load cells, or other means of reliable machine evaluation. The objectives of this cooperative study are to develop quality assurance procedures for monitoring the quality of mass timber and CLT during and after manufacturing and to develop assessment techniques for CLT panels in-service.
Resource Link
Less detail

Effect of Notches on the Performance of Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue2559
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Organization
Forest Products Laboratory
Mississippi State University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Topic
Mechanical Properties
Keywords
Notches
Notched Connections
Bending Properties
Flexural Properties
Research Status
In Progress
Notes
Project contacts are Robert J. Ross at the Forest Products Laboratory and Rubin Shmulsky at Mississippi State University
Summary
Notches, particularly when incorporated on the tensile face, influence the ultimate capacity of members, such as beams and floor panels. Understanding and quantification of failure modes, ductility, and strength of notched CLT floor panels can allow the safe application of notches on building construction. Despite wood’s ductility, notches are known areas of stress concentration. The 2018 International Residential Code for one- and two-family dwellings (International Code Council 2017) restricts the use of notches on engineered wood products by requiring structural calculations instead of elucidating the ways notches might be used. To employ CLT to its maximum potential, there is a current and pressing need for better knowledge regarding the influence of notches on flexural performance. This research seeks to review the literature regarding notches in solid and engineered beams, review typical CLT design details that employ or utilized notched panels, and conduct pilot-scale testing of notched CLT panels.
Resource Link
Less detail