Long-span timber floor elements increase the flexibility of a building and exhibit a significant market potential. Timber floor elements are endeavouring to fulfil this potential, but building projects employing long-span timber floors have encountered drawbacks. High costs and vibration performance are challenging, and the timber industry is under substantial pressure to find attractive solutions for building components with otherwise favourable environmental features. Only a few existing studies have investigated serviceability sensitivity in relation to timber floor connections. Interconnections are inexpensive to produce and install and may offer a resource-efficient approach to improving serviceability performance. In the present study, the effect of interconnections is investigated in a full-scale structural test. Floor elements positioned in different configurations have been tested for static and dynamic performance using different types of interconnections. The observed effects of interconnection types vary according to the configuration and direction of mode shapes, and are assessed in terms of shift in frequency, damping and resonant energy. These can all be utilised in combination with observed differences in the deflection parameter. The present work demonstrates that connections between timber elements have significant effects on timber floor serviceability and may offer interesting solutions to improve the vibration performance of long-span timber floors.
The use of moment-resisting frames with semi-rigid connections as a lateral load-carrying system in timber buildings can reduce the need for bracing with diagonal members or walls and allow for more open and flexible architecture. The overall performance of moment-resisting frames depends largely on the properties of their connections. Screwed-in threaded rods with wood screw thread feature high axial stiffness and capacity and they may be used as fasteners in beam-to-column, moment-resisting timber connections. In the present paper, a structural concept for a beam–to-column, moment-resisting timber connection based on threaded rods is presented and explained. Analytical expressions for the estimation of the rotational stiffness and the forces in the rods were derived based on a component-method approach. The analytical predictions for stiffness were compared to experimental results from full scale tests and the agreement was good.
Over the last decades, the increasing urbanization and environmental challenges have created a demand for mid-rise and high-rise timber buildings in modern cities. The major challenge for mid-rise and high-rise timber buildings typically is the fulfillment of the serviceability requirements, especially limitation with respect to the wind-induced displacements and accelerations. The purpose of the present paper is to evaluate the feasibility and the limitations of moment-resisting timber frames under service load according to the present regulations. The parametric analyses investigate the effects of the rotational stiffness of beam-to-column and column-to-foundation connections, storey number and height, number and length of bays, column cross-section dimensions and spacing between frames on the overall serviceability performance of the frames. Elastic and modal analysis were carried out for a total of 17,800 planar moment-resisting timber frames with different parameters by use of Abaqus Finite Element (abbr. FE) software. Finally, the obtained results were used to derive simple expressions for the lateral displacement, maximum inter-story drift, fundamental eigen-frequency, mode shapes and acceleration.
Stress-laminated timber (SLT) decks in bridges are popular structural systems in bridge engineering. SLT decks are made from parallel timber beams placed side by side and pre-stressed together by means of steel rods. SLT decks can be in any length by just using displaced butt joints. The paper presents results from friction experiments performed in both grain and transverse direction with different levels of pre-stress. Numerical simulations of these experiments in addition to comparisons to full-scale experiments of SLT decks presented in literature verified the numerical model approach. Furthermore, several alternative SLT deck configurations with different amounts of butt joints and pre-stressing rod locations were modelled to study their influence on the structural properties of SLT decks. Finally, some recommendations on design of SLT bridge decks are given.
A new timber frame structural system consisting of continuous columns, prefabricated hollow box timber decks and beam-to-column moment-resisting connections is investigated. The hollow box timber decks allow long spans with competitive floor height and efficient material consumption. To achieve long spans, semi-rigid connections at the corners of deck elements are used to join the columns to the deck elements. In the present paper, experimental investigations of a semi-rigid moment-resisting connection and a mock-up frame assembly are presented. The semi-rigid connection consists of inclined screwed-in threaded rods and steel coupling parts, connected with friction bolts. Full-scale moment-resisting timber connections were tested under monotonic and cyclic loading to quantify rotational stiffness, energy dissipation and moment resistance. The mock-up frame assembly was tested under cyclic lateral loading and with experimental modal analysis. The lateral stiffness, energy dissipation, rotational stiffness of the connections and the eigen frequencies of the mock-up frame assembly were quantified based on the experimental tests in combination with a Finite Element model, i.e., the model was validated with experimental results from the rotational stiffness tests of the beam-to-column connections. Finally, the structural damping measured with experimental modal analysis was evaluated and compared with FE model using the material damping of timber parts and equivalent viscous damping of the moment-resisting connections.
An experimental investigation on withdrawal of pairs of screwed-in threaded rods embedded in glued-laminated timber elements is presented in this paper. Specimens with varying angles between the rod axis and the grain direction (a = 15°, 30°, 60°, 90°) and 2 different configurations with respect to edge distances and spacings were tested. The diameter and the embedment length of the rods were 20 and 450 mm, respectively. The threaded rods were embedded in a row perpendicular to the plain of the grain. The edge distances and spacings were smaller than the minimum requirements according to Eurocode 5. The withdrawal capacity of pairs of rods was compared to the withdrawal capacity of single rods and the effective number, n ef , was found to be in the range 1.72–1.94, despite the small edge distances and spacings. Based on the experimental results obtained, a simple approximating expression was derived for n ef . An analytical model based on Volkersen theory with an idealized bi-linear constitutive relationship was used to estimate the withdrawal capacity and stiffness. The analytical estimations were in good agreement with the experimental results. Finally, the withdrawal stiffness was estimated by use of finite element simulations. The numerical estimations for the withdrawal stiffness were also in good agreement with the experimental results.