Skip header and navigation

4 records – page 1 of 1.

Design of Timber Members Subjected to Axial Compression or Combined Axial Compression and Bending Based on 2nd Order Theory

https://research.thinkwood.com/en/permalink/catalogue115
Year of Publication
2015
Topic
Design and Systems
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Columns
Author
Frangi, Andrea
Steiger, René
Theiler, Matthias
Organization
International Network on Timber Engineering Research (INTER)
Year of Publication
2015
Country of Publication
Germany
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Columns
Topic
Design and Systems
Mechanical Properties
Keywords
Bending
Buckling
Codes
Compression
Deformation
Monte Carlo
Simulation
Structural
Testing
Language
English
Conference
INTER 2015
Research Status
Complete
Notes
August 24-27, 2015, Sibenik, Croatia
Summary
The paper examines the behaviour of structural timber members subjected to axial compression or combined axial compression and bending. Based on experimental and numerical investigations, the accuracy of the existing approach in Eurocode 5 for the design of timber members subjected to axial compression or combined axial compression and bending is assessed and modifications are suggested. By means of extensive experimental investigations, a data base was created for the validation of calculation models and for the assessment of design concepts. In order to assess the behaviour of timber members subjected to axial compression or combined axial compression and bending, strain-based calculation models were developed. The investigations indicate that the existing approach of Eurocode 5 based on 2nd order analysis can lead to an overestimation of the load-bearing capacity. Hence, a modified design approach was developed which agrees with the results of the Monte Carlo simulations very well and thus ensures a safe and economical design of timber members subjected to compression or combined compression and bending.
Online Access
Free
Resource Link
Less detail

Rolling Shear Properties of Some European Timber Species with Focus on Cross Laminated Timber (CLT): Test Configuration and Parameter Study

https://research.thinkwood.com/en/permalink/catalogue25
Year of Publication
2015
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Author
Frangi, Andrea
Schickhofer, Gerhard
Brandner, Reinhard
Ehrhart, Thomas
Organization
International Network on Timber Engineering Research (INTER)
Year of Publication
2015
Country of Publication
Croatia
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Topic
Mechanical Properties
Keywords
Failure
Rolling shear
Testing
Norway Spruce
Pine
Birch
Beech
Poplar
Ash
Language
English
Conference
INTER 2015
Research Status
Complete
Notes
August 24-27, 2015, Šibenik, Croatia
Summary
Cross laminated timber (CLT) has gained popularity and relevance in the construction industry during the past decade. Its versatile applicability, economic competitiveness as well as an increasing social consciousness for sustainable constructions have been main reasons for this positive development. Its laminar composition enables CLT to withstand in- and out-of-plane loads. Due to its structure featuring orthogonally oriented adjacent layers, in CLT loaded out-of-plane, shear and more specific rolling shear has to be considered in ultimate (ULS) as well as serviceability limit state (SLS) design. This is because rolling shear constitutes a potential failure mechanism and contributes a noticeable amount to the overall deflection. Comprehensive knowledge on rolling shear modulus (GR) and strength (fR) is therefore of utmost importance for an adequate design of CLT structures. Previous investigations on rolling shear properties and their influential parameters have primarily been performed numerically and using Norway spruce (Picea abies). The main goal of our contribution, based on investigations detailed in Ehrhart (2014), was to identify the most important parameters for rolling shear characteristics and to quantify their influence. Furthermore, information about the rolling shear performance of several timber species was analysed to investigate their potential for use in CLT-products. In view of upcoming new timber species increasingly pushed into the market, investigations on rolling shear comprised also some hardwood and other softwood species with a potential to be used for (cross) laminated timber products.
Online Access
Free
Resource Link
Less detail

Shear Properties of Cross Laminated Timber (CLT) under In-Plane Load: Test Configuration and Experimental Study

https://research.thinkwood.com/en/permalink/catalogue180
Year of Publication
2015
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Author
Brandner, Reinhard
Dietsch, Philipp
Dröscher, Julia
Schulte-Wrede, Michael
Kreuzinger, Heinrich
Sieder, Mike
Schickhofer, Gerhard
Winter, Stefan
Organization
International Network on Timber Engineering Research (INTER)
Year of Publication
2015
Country of Publication
Croatia
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Topic
Mechanical Properties
Keywords
Diaphragms
Failure Mechanisms
Shear Strength
In-Plane Shear Test
Language
English
Conference
INTER 2015
Research Status
Complete
Notes
August 24-27, 2015, Sibenik, Croatia
Summary
Consolidated knowledge of CLT properties under in-plane shear is crucial for typical structural applications such as wall and floor diaphragms, cantilevered CLT walls and CLT used as (deep) beams, in all cases potentially featuring holes or notches. The current technical approvals for CLT products contain differing regulations to determine their load-carrying capacities in-plane. Generally they imply a verification of the torsional stresses in the cross-section of the cross-wise glued elements as well as a verification of the shear stresses proportionally assigned to the boards of the top and cross layers. The basis of theoretical and practical considerations are the following three basic failure scenarios for a CLT-element under in-plane shear: (i) gross-shear (longitudinal shearing in all layers), (ii) net-shear (transverse shearing in all layers in weak direction), and (iii) torsion failure in the gluing interfaces between the layers
Online Access
Free
Resource Link
Less detail

Structural Characterization of Multi-Storey CLT Buildings Braced with Cores and Additional Shear Walls

https://research.thinkwood.com/en/permalink/catalogue203
Year of Publication
2015
Topic
Seismic
Connections
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Shear Walls
Author
Polastri, Andrea
Pozza, Luca
Loss, Christiano
Smith, Ian
Organization
International Network on Timber Engineering Research (INTER)
Year of Publication
2015
Country of Publication
Croatia
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Shear Walls
Topic
Seismic
Connections
Keywords
Codes
Eurocode
Mid-Rise
Language
English
Conference
INTER 2015
Research Status
Complete
Notes
August 24-27, 2015, Šibenik, Croatia
Summary
This paper related to elimination of the deficiencies. The behaviour of multi-storey buildings braced with cores and CLT shear walls is examined based on numerical analyses. Two procedure for calibrating numerical analysis models are proposed using information from Eurocode 5 [13] and specific experimental test data. This includes calibration of parameters that characterise connections between CLT panels and other CLT panels, building cores and shear walls. The aim is to make the characterizations of behaviours of connections that reflect how those connections perform within complete multi-storey superstructures, rather than in isolation or as parts of substructures. The earthquake action for cases studied was according to Eurocode 8 [14] and using the appropriate behaviour factor (q factor). Results of analyses of entire buildings are presented in terms of principal elastic periods, base shear and up-lift forces. Discussion addresses key issues associated with behaviour of such systems and modelling them. Obtained results permit creation of appropriate guidelines and rules for design of the aforementioned types of hybrid buildings incorporating CLT wall panels.
Online Access
Free
Resource Link
Less detail