Glulam and laminated veneer lumber protected by a combination of treatment with borate by two processes, and a film-forming coating, were exposed outdoors in an above-ground field test using a modified post and rail test design. After eight years’ exposure, early to moderate decay was found in untreated test units, while those which were borate-treated by either method were generally sound up to six years and showed greatly reduced decay at eight years.
Glulam manufactured from laminating stock of three species pre-treated with ACQ-D or CA was exposed outdoors in an above-ground field test using a modified post and rail test design. After six years’ exposure, early to moderate decay was found in untreated test units, while those which were preservative-treated were completely sound.
Field tests of untreated and preservative-treated glulam beams in outdoor exposure, in ground contact and above ground, were inspected for decay after five years. Copper azole and ACQ-D-treated material was in excellent condition, while moderate to severe decay was present in untreated non-durable material. Early stages of decay were also noted in yellow cedar glulam in the above-ground test. Using galvanized rather than stainless steel fasteners appeared to have a protective effect against decay in untreated material, supporting the hypothesis that zinc from the sacrificial coating on galvanized bolts inhibits germination of basidiospores.