Skip header and navigation

2 records – page 1 of 1.

Cross-Laminated Timber Fasteners Solutions for Tall Wood Buildings

https://research.thinkwood.com/en/permalink/catalogue2197
Topic
Seismic
Connections
Material
CLT (Cross-Laminated Timber)
Application
Floors
Shear Walls
Walls
Organization
TallWood Design Institute
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Application
Floors
Shear Walls
Walls
Topic
Seismic
Connections
Keywords
Wall-to-Floor
Wall-to-Wall
Wall-to-Foundation
Strength Properties
Screw Connectors
Research Status
In Progress
Notes
Project contact is Arijit Sinha at Oregon State University
Summary
Constructing buildings with CLT requires development of novel panel attachment methods and mechanisms. Architects and engineers need to know the engineering strength properties of connected panels, especially in an earthquake prone area. This project will improve knowledge of three types of wall panel connections: wall-to-floor, wall-to-wall, and wall-to-foundation. Testing will determine the strength properties of metal connectors applied with diffferent types and sizes of screw fasteners. The data will be used to develop a modeling tool that engineers can use when designing multi-story buildings to be constructed with CLT panels.
Less detail

Cyclic Response of Insulated Steel Angle Brackets Used for Cross-Laminated Timber Connections

https://research.thinkwood.com/en/permalink/catalogue2765
Year of Publication
2021
Topic
Seismic
Acoustics and Vibration
Connections
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Author
Kržan, Meta
Azinovic, Boris
Publisher
Springer
Year of Publication
2021
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Topic
Seismic
Acoustics and Vibration
Connections
Keywords
Angle Bracket
Sound Insulation
Insulation
Monotonic Test
Cyclic Tests
Wall-to-Floor
Stiffness
Load Bearing Capacity
Shear
Tensile
Language
English
Research Status
Complete
Series
European Journal of Wood and Wood Products
Summary
In cross-laminated timber (CLT) buildings, in order to reduce the disturbing transmission of sound over the flanking parts, special insulation layers are used between the CLT walls and slabs, together with insulated angle-bracket connections. However, the influence of such CLT connections and insulation layers on the seismic resistance of CLT structures has not yet been studied. In this paper, experimental investigation on CLT panels installed on insulation bedding and fastened to the CLT floor using an innovative, insulated, steel angle bracket, are presented. The novelty of the investigated angle-bracket connection is, in addition to the sound insulation, its resistance to both shear as well as uplift forces as it is intended to be used instead of traditional angle brackets and hold-down connections to simplify the construction. Therefore, monotonic and cyclic tests on the CLT wall-to-floor connections were performed in shear and tensile/compressive load direction. Specimens with and without insulation under the angle bracket and between the CLT panels were studied and compared. Tests of insulated specimens have proved that the insulation has a marginal influence on the load-bearing capacity; however, it significantly influences the stiffness characteristics. In general, the experiments have shown that the connection could also be used for seismic resistant CLT structures, although some minor improvements should be made.
Online Access
Free
Resource Link
Less detail