Skip header and navigation

8 records – page 1 of 1.

Development and Full-Scale Validation of Resilience-Based Seismic Design of Tall Wood Buildings: The NHERI Tallwood Project

https://research.thinkwood.com/en/permalink/catalogue1477
Year of Publication
2017
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Walls
Wood Building Systems
Author
Pei, Shiling
van de Lindt, John
Ricles, James
Sause, Richard
Berman, Jeffrey
Ryan, Keri
Dolan, Daniel
Buchanan, Andrew
Robinson, Thomas
McDonnell, Eric
Blomgren, Hans-Erik
Popovski, Marjan
Rammer, Douglas
Year of Publication
2017
Country of Publication
New Zealand
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Walls
Wood Building Systems
Topic
Design and Systems
Seismic
Keywords
Tall Wood
Post-Tensioned
Rocking Walls
Resilience-Based Seismic Design
Shaking Table Test
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
April 27-29, 2017, Wellington, New Zealand
Summary
With global urbanization trends, the demands for tall residential and mixeduse buildings in the range of 8~20 stories are increasing. One new structural system in this height range are tall wood buildings which have been built in select locations around the world using a relatively new heavy timber structural material known as cross laminated timber (CLT). With its relatively light weight, there is consensus amongst the global wood seismic research and practitioner community that tall wood buildings have a substantial potential to become a key solution to building future seismically resilient cities. This paper introduces the NHERI Tallwood Project recentely funded by the U.S. National Science Fundation to develop and validate a seismic design methodology for tall wood buildings that incorporates high-performance structural and nonstructural systems and can quantitatively account for building resilience. This will be accomplished through a series of research tasks planned over a 4-year period. These tasks will include mechanistic modeling of tall wood buildings with several variants of post-tensioned rocking CLT wall systems, fragility modeling of structural and non-structural building components that affect resilience, fullscale biaxial testing of building sub-assembly systems, development of a resilience-based seismic design (RBSD) methodology, and finally a series of full-scale shaking table tests of a 10-story CLT building specimen to validate the proposed design. The project will deliver a new tall building type capable of transforming the urban building landscape by addressing urbanization demand while enhancing resilience and sustainability.
Online Access
Free
Resource Link
Less detail

The Experimental Study on Seismic Performance of Cross-Laminated-Timber Panel Construction

https://research.thinkwood.com/en/permalink/catalogue972
Year of Publication
2012
Topic
Seismic
Material
CLT (Cross-Laminated Timber)
Author
Suganumi, Naoto
Goto, Hiroshi
Yasumura, Motoi
Hamamoto, Takashi
Miyake, Tatsuya
Minoru, Okabe
Kaiko, Naoto
Nakagawa, Takafumi
Tsuda, Chihiro
Organization
Architectural Institute of Japan
Year of Publication
2012
Country of Publication
Japan
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Topic
Seismic
Keywords
Static Loading Test
Shaking Table Test
Language
Japanese
Research Status
Complete
Summary
The wood engineering community has dedicated a significant amount of effort over the last decades to establish a reliable predictive model for the load-carrying capacity of timber connections under wood failure mechanisms. Test results from various sources (Foschi and Longworth 1975; Johnsson 2003; Quenneville and Mohammad 2000; Stahl et al. 2004; Zarnani and Quenneville 2012a) demonstrate that for multi-fastener connections, failure of wood can be the dominant mode. In existing wood strength prediction models for parallel to grain failure in timber connections using dowel-type fasteners, different methods consider the minimum, maximum or the summation of the tensile and shear capacities of the failed wood block planes. This results in disagreements between the experimental values and the predictions. It is postulated that these methods are not appropriate since the stiffness in the wood blocks adjacent to the tensile and shear planes differs and this leads to uneven load distribution amongst the resisting planes (Johnsson 2004; Zarnani and Quenneville 2012a). The present study focuses on the nailed connections. A closed-form analytical method to determine the load-carrying capacity of wood under parallel-to-grain loading in small dowel-type connections in timber products is thus proposed. The proposed stiffness-based model has already been verified in brittle and mixed failure modes of timber rivet connections (Zarnani and Quenneville 2013b).
Online Access
Free
Resource Link
Less detail

Methods for Practice-Oriented Linear Analysis in Seismic Design of Cross Laminated Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue2304
Year of Publication
2020
Topic
Seismic
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems

Numerical Evaluation of Seismic Capacity of Structures with Hybrid Timber-Glass Panels

https://research.thinkwood.com/en/permalink/catalogue1745
Year of Publication
2016
Topic
Mechanical Properties
Seismic
Material
Timber-Glass Composite
Author
Barbalic, Jure
Rajcic, Vlatka
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Glass Composite
Topic
Mechanical Properties
Seismic
Keywords
Ductility
Panels
Strength
Stiffness
Energy Dissipation
Full Scale
Shaking Table Test
Eurocode 8
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 4938-4946
Summary
Fulfilment of conditions given by European design codes for structures in seismic regions presents a problem during the design of new and repairing of existing structures. Although there are various options, obvious choices are solutions which provide increase of rigidity and seismic capacity with minimal increase of structural mass. Current research at the University of Zagreb, performed in cooperation with the University of Ljubljana, is leading to the development of special kind of high-ductility hybrid panel made of timber frame with supporting laminated glass infill, which, in addition to strength and stiffness, is also characterized by high level of seismic energy dissipation. This paper objective is to give preliminary assessment of application of hybrid panel as seismic reinforcement in concrete, steel and timber frame structures. Finally, to provide more accurate input data, numerical results are compared for the structures tested in full-scale shaking table test.
Online Access
Free
Resource Link
Less detail

Shaking Table Testing of a Multi-Storey Post-Tensioned Glulam Building: Preliminary Experimental Results

https://research.thinkwood.com/en/permalink/catalogue1854
Year of Publication
2018
Topic
Seismic
Design and Systems
Material
Glulam (Glue-Laminated Timber)
Application
Frames
Beams
Columns

Shaking Table Testing of a Multi-Storey Post-Tensioned Timber Building

https://research.thinkwood.com/en/permalink/catalogue650
Year of Publication
2014
Topic
Seismic
Material
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
Author
Carradine, David
Nigro, Domenico
Simonetti, Michele
Smith, Tobias
Pampanin, Stefano
Di Cesare, Antonio
Carlo Ponzo, Felice
Year of Publication
2014
Country of Publication
New Zealand
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
Topic
Seismic
Keywords
Multi-Storey
Post-Tensioned
Reinforcement
Shaking Table Testing
Dissipative Steel Angles
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
March 21-23, 2014, Auckland, New Zealand
Summary
This paper describes results of shaking table testing of a post-tensioned timber frame building in the structural laboratory of the University of Basilicata in Potenza, Italy. This experimental campaign is part of a series of experimental tests in collaboration with the University of Canterbury in Christchurch, New Zealand. The specimen was 3-dimensional, 3-storey, 2/3rd scale and constructed using post-tensioned timber frames in both directions. The structure was tested with and without dissipative steel angle reinforcing which was designed to yield at a certain level of drift. These steel angles release energy through hysteresis during seismic loading, thus increasing damping. Testing was performed up to a maximum PGA of 0.77g with and 0.58g without the dissipative reinforcing. At comparable levels of PGA the addition of the reinforcing reduced drifts by 32% without increases in peak floor accelerations. Test results were also compared favourable against numerical blind predictions using the RUAUMOKO 2D and SAP2000 structural analysis programs.
Online Access
Free
Resource Link
Less detail

Study on Seismic Performance of Building Structure with Cross Laminated Timber: Part 13: Relative Story Displacement of Full Scale 3-Story Model -Comparisons with Shaking Table Test

https://research.thinkwood.com/en/permalink/catalogue982
Year of Publication
2013
Topic
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Yahaura, Sota
Goto, Hiroshi
Hamamoto, Takashi
Gosei, Murakami
Miyake, Tatsuya
Matsumoto, Kazuyuki
Kaiko, Naoto
Organization
Architectural Institute of Japan
Year of Publication
2013
Country of Publication
Japan
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Seismic
Keywords
Static Load Tests
Shaking Table Test
Shear Force
Seismic Performance
Language
Japanese
Research Status
Complete
Summary
The material presented in this paper refers to a part of the investigation on cross-laminated (XLam) wall panel systems subjected to seismic excitation, carried out within the bilateral project realized by the Institute of Earthquake Engineering and Engineering Seismology (IZIIS) and the Faculty of Civil and Geodetic Engineering at the University of Ljubljana (UL FCGE). The full program of the research consista of basic tests of small XLam wooden blocks and quasi-static tests of anchors, then quasi-static tests of full-scale wall panels with given anchors, shaking-table tests of two types of XLam systems including ambient-vibration tests, and finally analytical research for the definition of the computational model for the analysis of these structural systems. In this paper, the full-scale shaking-table tests for one XLam system type (i.e. specimen 1 consisting of two single-unit massive wooden XLam panels) that have been performed in the IZIIS laboratory are discussed. The principal objectives of the shaking-table tests have been to get an insight into the behavior of the investigated XLam panel systems under seismic excitations, develop a physical and practical computational model for simutalion of the dynamic response based on the tests, and finally correlate the results with those from the previously performed quasi-static tests on the same wooden panel types. The obtained experimental results have been verified using a proposed computational model that included new contitutive relationships for anchors and contact zones between panels and foundations. Because a reasonable agreement between the numerical and experimental results has been achieved, the proposed computational model is expected to provide a solid basis for future research on the practical design of these relatively new materials and systems.
Online Access
Free
Resource Link
Less detail

Verification of Seismic Resistant Performance of Developed Original Cross-Laminated Timber Core Structure Method by Shaking Table Experiment

https://research.thinkwood.com/en/permalink/catalogue2699
Year of Publication
2020
Topic
Seismic
Connections
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Gunawan, Indra
Moritani, K
Isoda, Hiroshi
Mori, Takuro
Shinohara, M
Noda, T
Hosomi, R
Kurumada, Shinsuke
Makita, T
Publisher
IOP Publishing Ltd
Year of Publication
2020
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Seismic
Connections
Keywords
Core Structure
Shaking Table
Joint
Wall-to-Foundation
Wall-to-Wall
Earthquake
Shear Force
Research Status
Complete
Series
IOP Conference Series: Materials Science and Engineering
Summary
In recent years, development of wood engineering is gradually increasing. Instead of using many wood columns, cross laminated timber is expected for constructing spacious open space building. Since cross-laminated timber has high rigidity and strength, cross-laminated timber is expected to be used as earthquake resistant wall or floor diaphragm that makes the span of building can be increased and the position of the wall can be adjusted openly. In order to optimize the performance of cross-laminated timber for open space building, original cross laminated timber core structure method was developed. In this paper, the development concept of original cross laminated timber core structure method will be explained. In this method, the joint connection for each element such as joint connection for wall-concrete foundation, wall-beam, and wall to hanging wall was also developed. The experiment to verify the strength and rigidity of each connection has been conducted and the result will be described. The shaking table experiment of 3-story open space building constructed by original cross laminated timber structure using varies earthquake waves was conducted. In this experiment natural period, shear force for each floor, story drift, and building response data is taken. The result shows the structure designed by original CLT core structure method is satisfy the requirement based on Japan cross-laminated panel structure regulation.
Online Access
Free
Resource Link
Less detail

8 records – page 1 of 1.