Skip header and navigation

36 records – page 1 of 4.

Lateral Load Resistance of Cross-Laminated Wood Panels

https://research.thinkwood.com/en/permalink/catalogue2150
Year of Publication
2010
Topic
Connections
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Walls

Seismic Behaviour of Cross-Laminated Timber Structures

https://research.thinkwood.com/en/permalink/catalogue2151
Year of Publication
2012
Topic
Seismic
Connections
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Walls

Seismic Performance of a Post-Tensioned LVL Building Subjected to the Canterbury Earthquake Sequence

https://research.thinkwood.com/en/permalink/catalogue157
Year of Publication
2012
Topic
Seismic
Material
LVL (Laminated Veneer Lumber)
Application
Frames
Walls
Wood Building Systems
Author
Smith, Tobias
Carradine, David
Pampanin, Stefano
Ditommaso, Rocco
Carlo Ponzo, Felice
Year of Publication
2012
Country of Publication
New Zealand
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Application
Frames
Walls
Wood Building Systems
Topic
Seismic
Keywords
Post-Tensioning
Quasi-Static
Dynamic
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
April 13-15, 2012, Christchurch, New Zealand
Summary
The following paper presents the seismic performance of a two storey post-tensioned Laminated Veneer Lumber (LVL) building during the aftershock sequence following the MW 6.3 Canterbury earthquake that occurred on 22nd February 2011. Composed of post-tensioned walls in one direction and post-tensioned frames in the other, the structure under analysis was originally tested quasi-statically in the structural laboratories of the University of Canterbury (UoC), Christchurch, New Zealand. Following testing the building was demounted and reassembled as the offices of the STIC (Structural Timber Innovation Company) research consortium on the UoC campus with several significant changes being made to convert the building from its initial use as a test specimen into a functioning office structure.
Online Access
Free
Resource Link
Less detail

Performance Based Design and Force Modification Factors for CLT Structures

https://research.thinkwood.com/en/permalink/catalogue928
Year of Publication
2012
Topic
Seismic
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Walls
Author
Pei, Shiling
Popovski, Marjan
van de Lindt, John
Year of Publication
2012
Country of Publication
Sweden
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Walls
Topic
Seismic
Design and Systems
Keywords
Quasi-Static Tests
R-factors
Performance-Based Seismic Design
US
Canada
Language
English
Conference
CIB-W18 Meeting
Research Status
Complete
Notes
August 27-30, 2012, Växjö, Sweden p.293-304
Summary
In this paper, a performance-based seismic design (PBSD) of a CLT building was conducted and the seismic response of the CLT building was compared to that of a wood-frame structure tested during the NEESWood project. The results from the quasi-static tests on CLT walls performed at FPInnovations were used as input information for modelling of the CLT walls, the main lateral load resisting elements of the structure. Once the satisfactory design of the CLT mid-rise structure was established through PBSD, a force-based design was developed with varying R-factors and that design was compared to the PBSD result. In this way, suitable R-factors were calibrated so that they can yield equivalent seismic performance of the CLT building when designed using the traditional force-based design methods. Based on the results of this study it is recommended that a value of Rd=2.5 and Ro=1.5 can be assigned for structures with symmetrical floor plans in the National Building Code of Canada (NBCC). In the US an R=4.3 can be used for symmetrical CLT structures designed according to ASCE 7. These values can be assigned provided that the design values for CLT walls considered (and implemented in the material design standards) are similar to the values determined in this study using the kinematics model developed that includes the influence of the hold-downs in the CLT wall resistance. Design of the CLT building with those R-factors using the equivalent static procedures in the US and Canada will result in the CLT building having similar seismic performance to that of the tested wood-frame NEESWood building, which had only minor non-structural damage during a rare earthquake event.
Online Access
Free
Resource Link
Less detail

Seismic Design of Core-Walls for Multi-Storey Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue134
Year of Publication
2013
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Shafts and Chases
Author
Dunbar, Andrew
Pampanin, Stefano
Palermo, Alessandro
Buchanan, Andrew
Year of Publication
2013
Country of Publication
New Zealand
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Shafts and Chases
Topic
Design and Systems
Seismic
Keywords
Multi-Storey
Prefabrication
Pres-Lam
Residential
Quasi-Static Loading
Energy Dissipation
U-Shaped Flexural Plates
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
April 26-28, 2013, Wellington, New Zealand
Summary
This paper describes options for seismic design of pre-fabricated timber core-wall systems, used as stairwells and lift shafts for lateral load resistance in multi-storey timber buildings. The use of Cross-Laminated Timber (CLT) panels for multi-storey timber buildings is gaining popularity throughout the world, especially for residential construction. This paper describes the possible use of CLT core-walls for seismic resistance in open-plan commercial office buildings in New Zealand. Previous experimental testing at the University of Canterbury has been done on the in-plane behaviour of single and coupled Pres-Lam post-tensioned timber walls. However there has been very little research done on the behaviour of timber walls that are orthogonal to each other and no research into CLT walls in the post-tensioned Pres-Lam system. This paper describes the proposed test regime and design detailing of two half-scale twostorey CLT stairwells to be tested under a bi-directional quasi-static loading. The test specimens will include a half-flight stair case with landings within the stairwell. The “High seismic option” consists of post-tensioned CLT walls coupled with energy dissipating U-shaped Flexural Plates (UFP) attached between wall panels and square hollow section steel columns at the corner junctions. An alternative “Low seismic option” uses the same post-tensioned CLT panels, with no corner columns or UFPs. The panels will be connected by screws to provide a semi-rigid connection, allowing relative movement between the panels producing some level of energy dissipation.
Online Access
Free
Resource Link
Less detail

Experimental Investigation of Connection for the FFTT, A Timber-Steel Hybrid System

https://research.thinkwood.com/en/permalink/catalogue269
Year of Publication
2013
Topic
Connections
Design and Systems
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Hybrid Building Systems
Author
Bhat, Pooja
Organization
University of British Columbia
Year of Publication
2013
Country of Publication
Canada
Format
Thesis
Material
CLT (Cross-Laminated Timber)
Application
Hybrid Building Systems
Topic
Connections
Design and Systems
Mechanical Properties
Keywords
FFTT
Quasi-Static
Monotonic Testing
Reverse Cyclic Testing
Embedment Depth
Embedment Length
Strong-column Weak-beam Failure
Cross-Section Reduction
Language
English
Research Status
Complete
Summary
This thesis fills the existing knowledge gap between detailed design and global behaviour of hybrid systems through an experimental study on an innovative timber-steel hybrid system called “FFTT”. The FFTT system relies on wall panels of mass timber such as CLT for gravity and lateral load resistance and embedded steel sections for ductility under the earthquake loads. An important step towards the practical application of the FFTT system is obtaining the proof that the connections facilitate the desired ductile failure mode. The experimental investigation was carried out at the facility of FPInnovations, Vancouver. The testing program consisted of quasi-static monotonic and reverse cyclic tests on the timber-steel hybrid system with different configurations. The two beam profiles, wide flange I-sections and hollow rectangular sections were tested. The interaction between the steel beams and CLT panels and the effect of the embedment depth, cross-section reduction and embedment length were closely examined. The study demonstrated that when using an appropriate steel section, the desired ‘Strong Column–Weak Beam’ failure mechanism was initiated and excessive wood crushing was avoided. While wide-flange I-sections were stiffer and stronger, the hollow sections displayed better post-yield behaviour with higher energy dissipation capacity through several cycles of deformation under cyclic loads. The out-of-plane buckling at the point of yielding was the major setback of the embedment of wide-flange I-sections. This research served as a precursor for providing design guidance for the FFTT system as one option for tall wood buildings in high seismic regions.
Online Access
Free
Resource Link
Less detail

Seismic Performance of Core-Walls for Multi-Storey Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue61
Year of Publication
2014
Topic
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Walls
Author
Dunbar, Andrew
Pampanin, Stefano
Buchanan, Andrew
Year of Publication
2014
Country of Publication
New Zealand
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Walls
Topic
Seismic
Keywords
Connections
Multi-Storey
Post-Tensioned
Quasi-Static
Half-Scale
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
March 21-23, 2014, Auckland, New Zealand
Summary
This paper describes the results of experimental tests on two posttensioned timber core-walls tested under bi-directional quasi-static seismic loading. The half-scale two-storey test specimens included a stair with half-flight landings. The use of Cross-Laminated Timber (CLT) panels for multi-storey timber buildings is gaining popularity throughout the world, especially for residential construction. Posttensioned timber core-walls for lift-shafts or stairwells can be used for seismic resistance in open-plan commercial office buildings Previous experimental testing has been done on the in-plane behaviour of single and coupled timber walls at the University of Canterbury and elsewhere. However, there has been very little research done on the 3D behaviour of timber walls that are orthogonal to each other, and no research to date into post-tensioned CLT walls. The “high seismic option” consisted of full height post-tensioned CLT walls coupled with energy dissipating U-shaped Flexural Plates (UFPs) attached at the vertical joints between coupled wall panels and between wall panels and the steel corner columns. An alternative “low seismic option” consisted of post-tensioned CLT panels connected by screws, to provide a semi-rigid connection, allowing relative movement between the panels, producing some level of frictional energy dissipation.
Online Access
Free
Resource Link
Less detail

Experimental and Numerical Investigation of Novel Steel-Timber-Hybrid System

https://research.thinkwood.com/en/permalink/catalogue81
Year of Publication
2014
Topic
Design and Systems
Seismic
Connections
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Bhat, Pooja
Azim, Riasat
Popovski, Marjan
Tannert, Thomas
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Design and Systems
Seismic
Connections
Keywords
Tall Wood
Timber-Steel Hybrid
FFTT
Quasi-Static
Monotonic Testing
Cyclic Testing
Strong-column Weak-beam Failure
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
This paper summarises the experimental and numerical investigation conducted on the main connection of a novel steel-timber hybrid system called FFTT. The component behaviour of the hybrid system was investigated using quasi-static monotonic and reversed cyclic tests. Different steel profiles (wide flange I-sections and hollow rectangular sections) and embedment approaches for the steel profiles (partial and full embedment) were tested. The results demonstrated that when using an appropriate connection layout, the desired strong-column weak-beam failure mechanism was initiated and excessive wood crushing was avoided. A numerical model was developed that reasonably reflected the real component behaviour and can subsequently be used for numerical sensitivity studies and parameter optimization. The research presented herein serves as a precursor for providing design guidance for the FFTT system as an option for tall wood-hybrid buildings in seismic regions.
Online Access
Free
Resource Link
Less detail

Experimental and Numerical Analyses of New Massive Wooden Shear-Wall Systems

https://research.thinkwood.com/en/permalink/catalogue93
Year of Publication
2014
Topic
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Shear Walls
Author
Pozza, Luca
Scotta, Roberto
Trutalli, Davide
Pinna, Mario
Polastri, Andrea
Bertoni, Paolo
Publisher
MDPI
Year of Publication
2014
Country of Publication
Switzerland
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Shear Walls
Topic
Seismic
Keywords
Quasi-Static
Cyclic Loading Tests
Numerical model
Ductility
Eurocode 8
Behaviour Factor
Dissipative Capacity
Language
English
Research Status
Complete
Series
Buildings
ISSN
2075-5309
Summary
Three innovative massive wooden shear-wall systems (Cross-Laminated-Glued Wall, Cross-Laminated-Stapled Wall, Layered Wall with dovetail inserts) were tested and their structural behaviour under seismic action was assessed with numerical simulations. The wall specimens differ mainly in the method used to assemble the layers of timber boards composing them. Quasi-static cyclic loading tests were carried out and then reproduced with a non-linear numerical model calibrated on the test results to estimate the most appropriate behaviour factor for each system. Non-linear dynamic simulations of 15 artificially generated seismic shocks showed that these systems have good dissipative capacity when correctly designed and that they can be assigned to the medium ductility class of Eurocode 8. This work also shows the influence of deformations in wooden panels and base connectors on the behaviour factor and dissipative capacity of the system.
Online Access
Free
Resource Link
Less detail

Performance and Design of LVL Walls Coupled with UFP Dissipaters

https://research.thinkwood.com/en/permalink/catalogue195
Year of Publication
2014
Topic
Seismic
Material
LVL (Laminated Veneer Lumber)
Application
Shear Walls
Author
Iqbal, Asif
Pampanin, Stefano
Palermo, Alessandro
Buchanan, Andrew
Publisher
Taylor&Francis Online
Year of Publication
2014
Country of Publication
United Kingdom
Format
Journal Article
Material
LVL (Laminated Veneer Lumber)
Application
Shear Walls
Topic
Seismic
Keywords
Cyclic
Energy Dissipation
Multi-Storey
Post-Tensioned
U-Shaped Flexural Plates
Quasi-Static
Pseudo-dynamic
Language
English
Research Status
Complete
Series
Journal of Earthquake Engineering
Notes
http://dx.doi.org/10.1080/13632469.2014.987406
Summary
This article presents recent research on the seismic resistance of coupled post-tensioned timber walls for use in multi-story buildings. The walls are constructed from laminated veneer lumber (LVL), post-tensioned with unbonded vertical tendons, and coupled together with mild steel U-shaped flexural plates (UFPs) as energy dissipating elements. The timber wall design follows the same principles as used for post-tensioned precast concrete wall systems, using U-shaped plates to obtain a “hybrid” system, where energy is dissipated through yielding of the plates, while the vertical post-tensioning provides the restoring force. In this project, the same principles are applied to timber coupled walls. A series of quasi-static cyclic and pseudo-dynamic tests have been carried out to verify the applicability of the concept and the feasibility of the construction technology in timber buildings. The U-shaped plates showed stable energy dissipation characteristics and, in combination with the post-tensioning, desirable re-centering hysteretic behavior typically referred to as “flag-shape”. Because of the simplicity of these elements and the low cost of implementation, they have good prospects for practical application.
Online Access
Free
Resource Link
Less detail

36 records – page 1 of 4.