Project contact is Erol Karacabeyli at FPInnovations
To support NRCan's Tall Wood Building Demonstration Initiative, FPInnovations developed and published the 2014 Edition of Technical Guide for the Design and Construction of Tall Wood Buildings in Canada. More than 80 technical professionals comprised of design consultants and experts from FPInnovations, the National Research Council, the Canadian Wood Council and universities were involved in its development. The Guide has gained national and worldwide reputation as one of the most complete and credible documents helping to introduce to the design and construction community, and Authorities Having Jurisdiction the terms "Mass Timber Construction" and "Hybrid Tall Wood Buildings".
Since the publication of the First Edition, a number of tall wood buildings have been designed and constructed. Substantial regulatory changes are expected to happen based on the experience obtained from the demonstration initiative and the extensive research that has taken place domestically and internationally since the publication of the First Edition. These developments highlight a need for the Guide to be updated so that it aligns with efforts currently underway nationally and provincially and continues to lead in providing the design and construction community technical insight into new opportunities for building in wood.
The First Edition of the Guide helped to focus the efforts of the early adopters who participated in NRCan's Tall Wood Building Demonstration Initiative. Updating and aligning the Guide with the release of the new National Building Code of Canada and the Canadian wood design standard (CSA O86), and sharing the experiences gained from tall wood buildings built since the First Edition, will not only continue to expand the base of early adopters, but also help to move aspects of mass timber and hybrid wood buildings into the mainstream.
Project contact is Cristiano Loss at the University of British Columbia
This research aims at developing novel multi-material deconstructable hybrid connections for mass timber prefabricated buildings. Connections will be conceived in order to (i) meet multi-objective structural performance, (ii) favour modular construction, (iii) favour quick erection of buildings, (iv) quick disassemble and possible reuse of the timber members, and (v) provide seismic-resistant structural assemblies.
Project contact is Frank Lam at the University of British Columbia
The objective of this project is to develop a large span timber-based composite floor system for the construction of highrise office buildings. This prefabricated floor system could span over 10 m under regular office occupation load, and its use will expedite the construction significantly, converting to multi-million financial savings in a typical 40+ story project, besides the impact on reducing carbon footprint and enhancing living experience.
Project contact is Mark Fretz at the University of Oregon
University of Oregon and Oregon State University are collaborating through TallWood Design Institute (TDI) to upgrade aging, energy inefficient and seismically unprepared multifamily housing by developing a mass plywood (MPP) retrofit panel assembly that employs digital workflows and small diameter logs (down to 5") to create an economically viable energy/seismic retrofit model for the West Coast and beyond. The project has broad potential to support forested federal land management agencies and private forestry by proving a new market for small diameter logs.
Project contact is Luca Sorelli at Université Laval
Hybrid wood-concrete structures are emerging in the multi-storey wood building market, as they provide effective solutions in terms of lightness, rigidity, vibration and fire resistance (Yeoh et al., 2010, Dagenais et al., 2016). This project aims to reduce the cost of these hybrid floors by reducing the time of construction by prefabrication technology with emphasis on use. In addition, the goal is to explore the use of Ultra High Performance Fiber Composite Concrete (UHPC) to reduce the thickness of the wood slab, and also the use of ductile connections to increase the reliability of the floor (Habel and Gauvreau). 2008, Zhang and Gauvreau 2014, Auclair-Cuerrier et al 2016a). Finally, the concrete slab improves the diaphragm behavior of the floor to seismic actions.
Project contact is Y.H. Chui at the University of Alberta
The objective of this research is to develop efficient panel-to-panel connection details, and optimum floor configuration, including rigging details, for handling in the factory and at the construction site. Computer modelling will be conducted to develop preliminary recommendations on panel-to-panel connection details and optimum floor panel configuration. These recommendations will then be validated by a testing program in the laboratory.
Project contact is Craig Mitchell at Black Box Offsite Solutions
The study assesses the current state of the prefabrication industry in Canada and identifies key challenges and potential market opportunities in the sector for the increased use of mass timber. This analysis of the current state of the industry examines all forms of prefabrication, with a focus on wood (light wood frame and mass timber) where possible. A more detailed analysis focuses on future mass timber market opportunities in Canada and globally, including prefabricated timber building elements (i.e. structural components, retrofit components, etc.) and building typologies. Recommendations will inform policy decisions and other efforts required to support the further development and adoption of prefabricated timber buildings in Canada.