Skip header and navigation

36 records – page 1 of 4.

Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach

https://research.thinkwood.com/en/permalink/catalogue1209
Year of Publication
2016
Topic
Energy Performance
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Liu, Ying
Guo, Haibo
Sun, Cheng
Chang, Wen-Shao
Publisher
MDPI
Year of Publication
2016
Country of Publication
Switzerland
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Energy Performance
Keywords
Life-Cycle Assessment
Cradle-to-Grave
China
Cold Regions
Severe Cold Regions
Energy Consumption
Mid-Rise
Residential
Language
English
Research Status
Complete
Series
Sustainability
Abstract
Timber building has gained more and more attention worldwide due to it being a generic renewable material and having low environmental impact. It is widely accepted that the use of timber may be able to reduce the embodied energy of a building. However, the development of timber buildings in China...
Online Access
Free
Resource Link
Less detail

Assessment of Carbon Footprint of Laminated Veneer Lumber Elements in a Six Story Housing - Comparison to a Steel and Concrete Solution

https://research.thinkwood.com/en/permalink/catalogue2135
Year of Publication
2013
Topic
Environmental Impact
Design and Systems
Material
LVL (Laminated Veneer Lumber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
General Application

Brock Commons Tallwood House, University of British Columbia: An Environmental Building Declaration According to EN 15978 Standard

https://research.thinkwood.com/en/permalink/catalogue2158
Year of Publication
2018
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Hybrid Building Systems

Carbon Footprint Benchmarking of BC Multi-Unit Residential Buildings

https://research.thinkwood.com/en/permalink/catalogue2159
Year of Publication
2017
Topic
Environmental Impact
Material
Glulam (Glue-Laminated Timber)
LVL (Laminated Veneer Lumber)
Light Frame (Lumber+Panels)
PSL (Parallel Strand Lumber)
Application
Hybrid Building Systems

A Case Study to Investigate the Life Cycle Carbon Emissions and Carbon Storage Capacity of a Cross Laminated Timber, Multi-Storey Residential Building

https://research.thinkwood.com/en/permalink/catalogue2139
Year of Publication
2013
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Darby, Howard
Elmualim, Abbas
Kelly, F.
Year of Publication
2013
Country of Publication
Germany
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Environmental Impact
Keywords
Embodied Carbon
Life-Cycle Assessment
Multi-Storey
Multi-Family
Language
English
Conference
Sustainable Building Conference
Research Status
Complete
Notes
23-25 April 2013, Munich, Germany
Online Access
Free
Resource Link
Less detail

Chapter 11: Environmental Performance of Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue817
Year of Publication
2011
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Application
General Application
Floors
Author
Mahalle, Lal
O'Connor, Jennifer
Barry, Alpha
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Floors
Topic
Environmental Impact
Keywords
Concrete
Floors
Life-Cycle Assessment
Volatile Organic Compounds
Environmental Footprint
Indoor Air Quality
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Part 1 Environmental Footprint of CLT – Preliminary Findings In this part, we approximately determine some quantified environmental characteristics of CLT as a construction material, without conducting a full life cycle assessment (LCA). Finding no exi...
Online Access
Free
Resource Link
Less detail

Chapter 11: Environmental Performance of Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue830
Year of Publication
2013
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
O'Connor, Jennifer
Podesto, Lisa
Barry, Alpha
Grann, Blane
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Environmental Impact
Keywords
Life-Cycle Assessment
Mid-Rise
Volatile Organic Compounds
Environmental Footprint
North America
Sustainable Forest Practices
Indoor Air Quality
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
Abstract
The environmental footprint of CLT is frequently discussed as potentially beneficial when compared to functionally equivalent non-wood alternatives, particularly concrete systems. In this Chapter, the role of CLT in sustainable design is addressed. The embodied environmental impacts of CLT in a mid-rise building are discussed, with preliminary results from a comprehensive life cycle assessment (LCA) study. We also discuss other aspects of CLT's environmental profile, including impact on the forest resource and impact on indoor air quality from CLT emissions. The ability of the North American forest to sustainably support a CLT industry is an important consideration and is assessed from several angles, including a companion discussion regarding efficient use of material. Market projections and forest growth-removal are applied to reach a clear conclusion that CLT will not create a challenge to the sustainable forest practices currently in place in North America and safeguarded through legislation and/or third party certification programs. To assess potential impact on indoor air quality, CLT products with different thicknesses and glue lines were tested for their volative organic compounds (VOCs) including formaldehyde and acetaldehyde emissions. CLT was found to be in compliance with European labeling programs as well as the most stringent CARB limits for formaldehyde emissions. Testing was done on Canadian species, as there was no U.S. supplier of CLT at the time of this writing; because VOC emissions are affected by species, this work should be repeated from products made from different species.
Online Access
Free
Resource Link
Less detail

A Comparative Cradle-To-Gate Life Cycle Assessment of Mid-Rise Office Building Construction Alternatives: Laminated Timber or Reinforced Concrete

https://research.thinkwood.com/en/permalink/catalogue52
Year of Publication
2012
Topic
Energy Performance
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Robertson, Adam
Lam, Frank
Cole, Raymond
Publisher
MDPI
Year of Publication
2012
Country of Publication
Switzerland
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Energy Performance
Environmental Impact
Keywords
Concrete
Embodied Carbon
Life-Cycle Assessment
Mid-Rise
National Building Code of Canada
NBCC
North America
Office Buildings
Language
English
Research Status
Complete
Series
Buildings
ISSN
2075-5309
Abstract
The objective of this project was to quantify and compare the environmental impacts associated with alternative designs for a typical North American mid-rise office building. Two scenarios were considered; a traditional cast-in-place, reinforced concrete frame and a laminated timber hybrid design, which utilized engineered wood products (cross-laminated timber (CLT) and glulam). The boundary of the quantitative analysis was cradle-to-construction site gate and encompassed the structural support system and the building enclosure. Floor plans, elevations, material quantities, and structural loads associated with a five-storey concrete-framed building design were obtained from issued-for-construction drawings. A functionally equivalent, laminated timber hybrid design was conceived, based on Canadian Building Code requirements. Design values for locally produced CLT panels were established from in-house material testing. Primary data collected from a pilot-scale manufacturing facility was used to develop the life cycle inventory for CLT, whereas secondary sources were referenced for other construction materials. The TRACI characterization methodology was employed to translate inventory flows into impact indicators. The results indicated that the laminated timber building design offered a lower environmental impact in 10 of 11 assessment categories. The cradle-to-gate process energy was found to be nearly identical in both design scenarios (3.5 GJ/m2), whereas the cumulative embodied energy (feedstock plus process) of construction materials was estimated to be 8.2 and 4.6 GJ/m2 for the timber and concrete designs, respectively; which indicated an increased availability of readily accessible potential energy stored within the building materials of the timber alternative.
Online Access
Free
Resource Link
Less detail

A Comparative Life Cycle Assessment of Two Multi Storey Residential Apartment Buildings

https://research.thinkwood.com/en/permalink/catalogue403
Year of Publication
2015
Topic
Environmental Impact
Energy Performance
Material
Light Frame (Lumber+Panels)
Application
Wood Building Systems

A Comparison of the Energy Saving and Carbon Reduction Performance between Reinforced Concrete and Cross-Laminated Timber Structures in Residential Buildings in the Severe Cold Region of China

https://research.thinkwood.com/en/permalink/catalogue1207
Year of Publication
2017
Topic
Energy Performance
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Guo, Haibo
Liu, Ying
Meng, Yiping
Huang, Haoyu
Sun, Cheng
Shao, Yu
Publisher
MDPI
Year of Publication
2017
Country of Publication
Switzerland
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Energy Performance
Environmental Impact
Keywords
Energy Consumption
Carbon Emissions
Residential
Severe Cold Regions
Simulation
Reinforced Concrete
Life-Cycle Assessment
Language
English
Research Status
Complete
Series
Sustainability
ISSN
2071-1050
Abstract
This paper aims to investigate the energy saving and carbon reduction performance of cross-laminated timber residential buildings in the severe cold region of China through a computational simulation approach. The authors selected Harbin as the simulation environment, designed reference residential...
Online Access
Free
Resource Link
Less detail

36 records – page 1 of 4.