Skip header and navigation

2 records – page 1 of 1.

Direct Impact Sound Insulation of Cross Laminate Timber Floors with and without Toppings

https://research.thinkwood.com/en/permalink/catalogue227
Year of Publication
2014
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Zeitler, Berndt
Schoenwald, Stefan
Sabourin, Ivan
Organization
Inter-noise
Year of Publication
2014
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
North America
Sound Insulation
Concrete Topping
Interlayer
Conference
Inter-Noise 2014
Research Status
Complete
Notes
November 16-19, 2014, Melbourne, Australia
Summary
Cross Laminated Timber (CLT), which is well suited for construction of tall buildings, is becoming a more popular construction material in North America. However, to ensure comfortable living conditions, sound insulation measures are necessary. The study presented here compares results of direct impact sound insulation of 5- and 7-ply CLT floors covered with different a concrete toppings on various interlayers. Improvements of up to 21dB in Weighted Normalized Impact Sound Pressure Level (Ln,w) were observed using a newly proposed reference floor for CLTs. Furthermore, the improvements of floor coverings on CLT floors are compared to those achieved on other types of construction, such as the reference concrete floor. The improvements of Ln,w tend to be higher on the concrete floors than on the CLT floors tested. These and other findings will be presented.
Online Access
Free
Resource Link
Less detail

Effect of Flexible Supports on Vibration Performance of Timber Floors

https://research.thinkwood.com/en/permalink/catalogue190
Year of Publication
2012
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Author
Jarnerö, Kirsi
Bolmsvik, Åsa
Brandt, Anders
Olsson, Anders
Organization
Euronoise
Year of Publication
2012
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Residential
Multi-Storey
Noise
Prefabrication
In Situ
Vibration
Damping
Interlayer
Conference
Ninth European Conference on Noise Control (Euronoise)
Research Status
Complete
Notes
June 10-13, 2012, Prague, Czech Republic
Summary
In residential multi-storey buildings of timber it is of great importance to reduce the flanking transmission of noise. Some building systems do this by installing a vibration-damping elastic interlayer, Sylomer or Sylodyn , in the junction between the support and the floor structure. This interlayer also improves the floor vibration performance by adding damping to the structure. In the present work the vibration performance of a floor with such interlayers has been investigated both in laboratory and field tests. A prefabricated timber floor element was tested in laboratory on rigid supports and on supports with four different types of interlayers. The results are compared with in situ tests on a copy of the same floor element. The effect on vibration performance i.e. frequencies, damping ratio and mode shapes is studied. A comparison of the in situ test and the test with elastic interlayer in laboratory shows that the damping in situ is approximately three times higher than on a single floor element in the lab. This indicates that the damping in situ is affected be the surrounding building structure. The achieved damping ratio is highly dependent on the mode shapes. Mode shapes that have high mode shape coefficients along the edges where the interlayer material is located, result in higher modal damping ratios. The impulse velocity response, that is used to evaluate the vibration performance and rate experienced annoyance in the design of wooden joist floors, seems to be reduced when adding elastic layers at the supports.
Online Access
Free
Resource Link
Less detail