Skip header and navigation

8 records – page 1 of 1.

Cross-Laminated Timber Structural Design Volume 2

https://research.thinkwood.com/en/permalink/catalogue1953
Year of Publication
2018
Topic
Design and Systems
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Author
Wallner-Novak, Markus
Augustin, Manfred
Koppelhuber, Josef
Pock, Kurt
Publisher
proHolz Austria
Year of Publication
2018
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Topic
Design and Systems
Mechanical Properties
Keywords
Finite Element Modeling
Research Status
Complete
Summary
Cross-laminated timber has conquered new markets since the publication of volume I Basic design and engineering principles according to Eurocode. The present volume II describing Applications provides the designer of timber structures on the one hand with basics for design factors, mechanical properties and modelling with finite element method. On the other hand it describes in detail the design of floors, ribbed plates and walls e.g. by design approaches regarding forces in joints of plates and diaphragms, concentrated loads, openings, effective width and compression perpendicular to grain. Current scientific knowledge as well as experience from practical engineers is taken into account. 15 examples demonstrate the design approaches as references for practitioners. Closing background information for the shear correction coefficient, deformations due to concentrated loads and the modelling of crosslaminated timber as general grillage will illuminate the background and facilitate deeper understanding of the design with cross-laminated timber.
Online Access
Free
Resource Link
Less detail

Finite Element Modeling on Shear Performance of Grouted Stud Connectors for Steel–Timber Composite Beams

https://research.thinkwood.com/en/permalink/catalogue2944
Year of Publication
2022
Topic
Mechanical Properties
Material
Steel-Timber Composite
Application
Beams
Author
Zhang, Henan
Ling, Zhibin
Organization
Suzhou University of Science and Technology
Editor
Lopes, Sérgio
Publisher
MDPI
Year of Publication
2022
Format
Journal Article
Material
Steel-Timber Composite
Application
Beams
Topic
Mechanical Properties
Keywords
Shear Connection
Finite Element Modeling
Grouted Stud Connections
Research Status
Complete
Series
Materials
Summary
Steel–timber composite (STC) systems are considered as an environmentally friendly alternative to steel–concrete composite (SCC) structures due to its advantages including high strength-to-weight ratio, lower carbon footprint, and fully dry construction. Bolts and screws are the most commonly used connectors in STC system; however, they probably make great demands on the accuracy of construction because of the predrilling in both the timber slabs and steel girder fangles. To address this issue, the STC connections with grouted stud connectors (GSC) were proposed in this paper. In addition, stud connectors can also provide outstanding stiffness and load-bearing capacity. The mechanical characteristic of the GSC connections was exploratorily investigated by finite element (FE) modeling. The designed parameters for the FE models include stud diameter, stud strength, angle of outer layer of cross-laminated timber (CLT) panel, tapered groove configurations, and thickness of CLT panel. The numerical results indicated that the shear capacity and stiffness of the GSC connections were mainly influenced by stud diameter, stud strength, angle of outer layer of CLT panel, and the angle of the tapered grooves. Moreover, the FE simulated shear capacity of the GSC connections were compared with the results predicted by the available calculation formulas in design codes and literatures. Finally, the group effect of the GSC connections with multiple rows of studs was discussed based on the numerical results and parametric analyses. An effective row number of studs was proposed to characterize the group effect of the GSC connections.
Online Access
Free
Resource Link
Less detail

Fire Performance of Self-Tapping Screws in Tall Mass-Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue2877
Year of Publication
2021
Topic
Fire
Connections
Material
Glulam (Glue-Laminated Timber)
Author
Létourneau-Gagnon, Mathieu
Dagenais, Christian
Blanchet, Pierre
Organization
Université Laval
FPInnovations
Editor
Hwang, Cheol-Hong
Publisher
MDPI
Year of Publication
2021
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Topic
Fire
Connections
Keywords
Self-Tapping Screws
Heat Transfer
Fire Performance
Finite Element Modeling
Research Status
Complete
Series
Applied Sciences
Summary
Building elements are required to provide sufficient fire resistance based on requirements set forth in the National Building Code of Canada (NBCC). Annex B of the Canadian standard for wood engineering design (CSA O86-19) provides a design methodology to calculate the structural fire-resistance of large cross-section timber elements. However, it lacks at providing design provisions for connections. The objectives of this study are to understand the fire performance of modern mass timber fasteners such as self-tapping screws, namely to evaluate their thermo-mechanical behavior and to predict their structural fire-resistance for standard fire exposure up to two hours, as would be required for tall buildings in Canada. The results present the great fire performance of using self-tapping screws under a long time exposure on connections in mass timber construction. The smaller heated area of the exposed surface has limited thermal conduction along the fastener’s shanks and maintained their temperature profiles relatively low for two hours of exposure. Based on the heat-affected area, the study presents new design principles to determine the residual length of penetration that would provide adequate load-capacity of the fastener under fire conditions. It also allows determining safe fire-resistance values for unprotected fasteners in mass timber construction exposed up to two hours of standard fire exposure.
Online Access
Free
Resource Link
Less detail

Hybrid simulation of a post-tensioned timber frame and validation of numerical models for seismic design

https://research.thinkwood.com/en/permalink/catalogue3107
Year of Publication
2022
Topic
Seismic
Application
Frames
Author
Ogrizovic, J.
Abbiati, G.
Stojadinovic, B.
Frangi, A.
Organization
MWV Bauingenieure
University of Aarhus
ETH Zurich
Publisher
Elsevier
Year of Publication
2022
Format
Journal Article
Application
Frames
Topic
Seismic
Keywords
Post-tensioned Timber Frame
Seismic Analysis
Hybrid Simulation
Finite Element Modeling
Research Status
Complete
Series
Engineering Structures
Summary
The post-tensioned frame is one of the recently emerged structural systems for multi-story timber buildings. It is characterized by a high level of prefabrication and quick erection on the construction site. The post-tensioned frame developed at ETH Zurich is based on post-tensioned beam–column connections with hardwood reinforcement of the column in the connection region and column base connections with glued-in steel rods. Such a construction system is suitable for low- and mid-rise buildings that are located in regions characterized by low to moderate seismicity. This paper presents a series of hybrid simulations of the response of a two-story two-bay post-tensioned timber frame subjected to ground motion excitation. Nonlinear numerical models of both beam–column and column base connections to be used for design purposes are validated based on the experiments.
Online Access
Free
Resource Link
Less detail

Modeling stiffness of connections and non-structural elements for dynamic response of taller glulam timber frame buildings

https://research.thinkwood.com/en/permalink/catalogue3000
Year of Publication
2022
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Author
Tulebekova, Saule
Malo, Kjell
Rønnquist, Anders
Nåvik, Petter
Organization
Norwegian University of Science and Technology
Publisher
Elsevier
Year of Publication
2022
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Topic
Mechanical Properties
Keywords
Tall Timber Buildings
Glulam Connections
Finite Element Modeling
Dynamic Identification
Model Updating
Research Status
Complete
Series
Engineering Structures
Summary
Currently, there is limited knowledge of the dynamic response of taller glue laminated (glulam) timber buildings due to ambient vibrations. Based on previous studies, glulam frame connections, as well as non-structural elements (external timber walls and internal plasterboard partitions) can have a significant impact on the global stiffness properties, and there is a lack of knowledge in modeling and investigation of their impact on the serviceability level building dynamics. In this paper, a numerical modeling approach with the use of “connection-zones” suitable for analyzing the taller glulam timber frame buildings serviceability level response is presented. The “connection-zones” are generalized beam and shell elements, whose geometry and properties depend on the structural elements that are being connected. By introducing “connection-zones”, the stiffness in the connections can be estimated as modified stiffness with respect to the connected structural elements. This approach allows for the assessment of the impact of both glulam connection stiffness and non-structural element stiffness on the dynamic building response due to service loading. The results of ambient vibration measurements of an 18-storey glulam timber frame building, currently the tallest timber building in the world, are reported and used for validation of the developed numerical model with “connection-zones”. Based on model updating, the stiffness values for glulam connections are presented and the impact of non-structural elements is assessed. The updating procedure showed that the axial stiffness of diagonal connections is the governing parameter, while the rotational stiffness of the beam connections does not have a considerable impact on the dynamic response of the glulam frame type of building. Based on modal updating, connections exhibit a semi-rigid behavior. The impact of non-structural elements on the mode shapes of the building is observed. The obtained values can serve as a practical reference for engineers in their prediction models of taller glulam timber frame buildings serviceability level response.
Online Access
Free
Resource Link
Less detail

On the distribution of internal forces in single-storey CLT symmetric shear-walls with openings

https://research.thinkwood.com/en/permalink/catalogue2850
Year of Publication
2021
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Shear Walls
Author
Casagrande, Daniele
Fanti, Riccardo
Greco, Marco
Gavric, Igor
Polastri, Andrea
Organization
Institute of Bioeconomy - National Research Council of Italy
University of Trento
University of Primorska
Publisher
Elsevier
Year of Publication
2021
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Shear Walls
Topic
Mechanical Properties
Keywords
Shear Walls
Openings
Stress Distribution
Finite Element Modeling
Research Status
Complete
Series
Structures
Summary
This paper presents a numerical and analytical study on single-storey cross-laminated timber (CLT) shear-walls with openings subjected to lateral loads. The main objective was to investigate the location and distribution of maximum values of axial and shear forces in relevant wall sections. The influence of parameters such as wall geometry (different sizes of wall openings, door openings, lintel/parapet lengths and heights, wall thickness) and different stiffness levels of mechanical anchors for CLT wall connection with floor/foundation were studied. Finite element (FE) parametric analyses were performed on a set of single-storey CLT shear-walls with door and window openings and were compared with analytical models for determination of internal forces. The importance of wall connections’ flexibility was identified, as the distribution of internal forces in walls with rigid and flexible anchors were considerably different. The obtained outcomes of this study provide a solid base for the next step, an experimental investigation of in-plane internal force distribution in CLT walls with openings, which will serve for further development of numerical, analytical and design approaches.
Online Access
Free
Resource Link
Less detail

Pilot Study of a High Capacity Ductile Seismic Holdown for Cross Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue2409
Year of Publication
2019
Topic
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems

U.S. Mass Timber Floor Vibration Design Guide

https://research.thinkwood.com/en/permalink/catalogue2874
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Organization
WoodWorks
Year of Publication
2021
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Floor Vibration
Vibration Design Methods
Finite Element Modeling
Research Status
Complete
Summary
The scope of this guide focuses on the design of mass timber floor systems to limit human-induced vibration. The primary performance goal is to help designers achieve a low probability of adverse comment regarding floor vibrations in a manner consistent with the vibration design guides for steel and concrete systems. This includes excitation primarily from human walking as observed by other people in the building. Some treatment of design for sensitive equipment in response to human walking is also discussed. This design guide covers the range of currently available mass timber panels, including cross-laminated timber (CLT) manufactured from either solid sawn or structural composite lumber (SCL) laminations, nail-laminated timber (NLT), dowel laminated timber (DLT) and glue-laminated timber (GLT), as well as their support framework of timber beams. The target user of this guide is a design professional with working knowledge of mass timber structural design and some background knowledge of structural dynamics as related to floor vibrations. It may be particularly useful to design engineers with limited experience with vibration analysis, experienced multi-material engineers familiar with vibration analysis but unfamiliar with mass timber vibration, and applications engineers assisting manufacturers in the development of solutions and proposals for projects.
Online Access
Free
Resource Link
Less detail

8 records – page 1 of 1.