Skip header and navigation

Refine Results By

141 records – page 1 of 15.

Experimental Research on Structural Behaviors of Glulam I-Beam with a Special-Shaped Section

https://research.thinkwood.com/en/permalink/catalogue2447
Year of Publication
2020
Topic
Design and Systems
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Author
Yang, Ruyuan
Hong, Chaokun
Zhang, Xiaofeng
Yuan, Quan
Sun, Youfu
Publisher
Tech Science Press
Year of Publication
2020
Country of Publication
United States
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Topic
Design and Systems
Mechanical Properties
Keywords
Flange Thickness
Shear Pan Ratio
Stiffener
Stiffness
Bending
Failure
Language
English
Research Status
Complete
Series
Journal of Renewable Materials
Online Access
Free
Resource Link
Less detail

Salvaged Lumber for Structural Mass Timber Panels: Manufacturing and Testing

https://research.thinkwood.com/en/permalink/catalogue2470
Year of Publication
2020
Topic
Design and Systems
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Arbelaez, Raphael E.
Schimleck, Laurence
Sinha, Arijit
Publisher
Society of Wood Science and Technology
Year of Publication
2020
Country of Publication
United States
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Design and Systems
Mechanical Properties
Keywords
Bending Moment
Salvaged Lumber
Stiffness
Moment Resistance
Shear Resistance
Wood Failure
Delamination
Language
English
Research Status
Complete
Series
Wood and Fiber Science
Online Access
Free
Resource Link
Less detail

Bending Capacity of Orthogonal and Parallel Glulam T-section Beams

https://research.thinkwood.com/en/permalink/catalogue2476
Year of Publication
2020
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Bridges and Spans
Author
Wang, Jiejun
Yang, Tao
Ning, Fan
Rao, Zhenyu
Publisher
Eastern Macedonia and Thrace Institute of Technology (EMaTTech)
Year of Publication
2020
Country of Publication
Greece
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Bridges and Spans
Topic
Mechanical Properties
Keywords
Bearing Capacity
Stiffness
Integrity
Strain
Deflection
Ultimate Bearing Capacity
Shear Strength
Finite Element Model
Displacement
Failure Mechanism
Ductility
Language
English
Research Status
Complete
Series
Journal of Engineering Science and Technology Review
ISSN
1791-2377
Online Access
Free
Resource Link
Less detail

Bonding Performance of Adhesive Systems for Cross-Laminated Timber Treated with Micronized Copper Azole Type C (MCA-C)

https://research.thinkwood.com/en/permalink/catalogue2200
Year of Publication
2020
Topic
Design and Systems
Connections
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Lim, Hyungsuk
Tripathi, Sachin
Tang, Juliet
Publisher
ScienceDirect
Year of Publication
2020
Country of Publication
Netherlands
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Design and Systems
Connections
Keywords
Preservatives
Micronized Copper Azole-Type C
Bonding Performance
Delamination Tests
Block Shear Tests
Adhesives
Block Shear Strength
Wood Failure Percentage
Language
English
Research Status
Complete
Series
Construction and Building Materials
Summary
The feasibility of manufacturing cross-laminated timber (CLT) from southern yellow pine (United States grown) treated with micronized copper azole type C (MCA-C) preservative was evaluated. Lumber (2x6 visually graded no. 2 boards) was treated to two retention levels (1.0 and 2.4 kg/m3 ), planed to a thickness of 35 mm, and assembled along with an untreated control group using three adhesive systems following product specifications: melamine formaldehyde (MF), resorcinol formaldehyde (RF), and one-component polyurethane (PUR). Block shear and delamination tests were conducted to examine the bonding performance in accordance with ASTM D905 and ASTM D2559 Standards, respectively. One-way analysis of variance and Kruskal-Wallis H test were conducted to evaluate the effects of preservative retention and adhesive type on block shear strength (BSS) and wood failure percentage (WFP). Regardless of adhesive type, the 1.0 kg/m3 retention treatment significantly lowered BSS compared to the untreated control. CLT composed of the laminations treated at 2.4 kg/m3 maintained BSS when PUR and RF were used but not MF. The average WFP of each CLT configuration ranged from 89% to 99%. The untreated CLT specimens did not experience any delamination under accelerated weathering cycles. The delamination rates of the treated specimens assembled using MF and RF increased with the preservative retention level, while PUR provided delamination rates less than 1% to the laminations treated at both levels. These combined data suggest that, under the conditions tested, PUR provided overall better bonding performance than MF and RF for MCA-C treated wood.
Online Access
Free
Resource Link
Less detail

Mechanical Experimental Study on Tensile Bolted Connections of Crosslaminated Timber

https://research.thinkwood.com/en/permalink/catalogue2450
Year of Publication
2020
Topic
Connections
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Author
Su, Chenxiao
Xiong, Haibei
Publisher
Tech Science Press
Year of Publication
2020
Country of Publication
United States
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Topic
Connections
Mechanical Properties
Keywords
Monotonic Loading
Cyclic Loading
Deformation
Failure Modes
Wall-to-Wall
Wall-to-Floor
Bolted Connection
Load-Slip
Bearing Capacity
Yielding Point
Stiffness
Ductility
Language
English
Research Status
Complete
Series
Structural Durability & Health Monitoring
Online Access
Free
Resource Link
Less detail

The Bending Properties of Bamboo Strand Board I-Beams

https://research.thinkwood.com/en/permalink/catalogue2306
Year of Publication
2019
Topic
Design and Systems
Mechanical Properties
Material
Other Materials
Application
Beams
Wood Building Systems
Author
Sun, Yuhui
Jiang, Zehui
Liu, Huangrong
Sun, Zhengjun
Fang, Changhua
Publisher
Springer
Year of Publication
2019
Country of Publication
Singapore
Format
Journal Article
Material
Other Materials
Application
Beams
Wood Building Systems
Topic
Design and Systems
Mechanical Properties
Keywords
Stiffness
Strength
Load Capacity
Failure Mode
Language
English
Research Status
Complete
Series
Journal of Wood Science
Online Access
Free
Resource Link
Less detail

Bending and Rolling Shear Properties of Cross-Laminated Timber Fabricated with Canadian Hemlock

https://research.thinkwood.com/en/permalink/catalogue2407
Year of Publication
2019
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Wood Building Systems

Experimental Investigation of Cracked End-notched Glulam Beams Repaired with GFRP Bars

https://research.thinkwood.com/en/permalink/catalogue2444
Year of Publication
2019
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Beams

Shear Block Test Performance of Melunak and Mengkulang Parallel to Glueline

https://research.thinkwood.com/en/permalink/catalogue2472
Year of Publication
2019
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Abd Malek, Nor Jihan
Al-Afif, Abdullah Abdulrahman Ahmed
Hassan, Rohana
Publisher
IOP Publishing Ltd
Year of Publication
2019
Country of Publication
United Kingdom
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Shear Strength
Melunak
Mengkulang
Failure
Shear Block Test
Language
English
Research Status
Complete
Series
IOP Conference Series: Materials Science and Engineering
Online Access
Free
Resource Link
Less detail

Study on Flexural Behavior of Cross-Laminated Timber Based on Different Tree Species

https://research.thinkwood.com/en/permalink/catalogue2215
Year of Publication
2019
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Lu, Weidong
Gu, Jiahui
Wang, Bibo
Publisher
Hindawi Publishing Corporation
Year of Publication
2019
Country of Publication
Egypt
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Flexural Behavior
Failure Modes
Stiffness
Ductility
Ultimate Bearing Capacity
Language
English
Research Status
Complete
Series
Advances in Materials Science and Engineering
Online Access
Free
Resource Link
Less detail

141 records – page 1 of 15.