With the aim of evaluating the bond behaviour between glulam and carbon fibre reinforced polymer laminates strips, an experimental program using pull-out tests was carried, when the near-surface strengthening technique is applied. Two main variables were studied: the bond length and the type of pull-out test configuration. The instrumentation included the loaded and free-end slips, as well as the pullout force. Based on the obtained experimental results, and applying an analytical-numerical strategy, the local bond stress-slip relationship was determined. In this work the tests are described, the obtained results are presented and analysed, and the applicability of an inverse analysis to obtain the local bond law is demonstrated.
In recent years, increased focus has been placed on the development of timber as a natural renewable construction material. However, there exists significant potential for the development of environmentally friendly engineered structural elements by comb...
Timber as a primary structural material has been forced to continually evolve to keep abreast with the changing demands of the construction industry. This paper presents further research undertaken by Queen’s University Belfast to evaluate the advantages provided by the post-tensioning of timber members using novel basalt fibre reinforced polymer (BFRP) rods. Using the high strength, low density, highly durable BFRP tendons experimental investigations utilising the four-point bending method were conducted and monitored. From the experimentation it was found that there was an increase in load carrying capacity, a more favourable ductile failure mode and a further benefit of less net deflection due to the precamber induced by the post-tensioning prior to load application.
The mechanical behaviour of timber-to-timber connections with internal panels of densified veneer wood (DVW) and fibre-reinforced polymer (FRP) dowels was experimentally assessed and a design method, based on EN 1995-1-1, was developed. Embedment tests on DVW plates and bending/shear tests on FRP dowels were performed to characterise these components, followed by full-scale tests of connections assembled with these materials. The results show that these connections exhibit a mechanical behaviour compatible with structural applications, regarding both load-carrying capacity and ductility. The proposed design model is based on EN 1995-1-1’s expressions for connections with dowel-type fasteners and gives good predictions of the experimental load-carrying capacities.
In order to study the lateral resistance of reinforced glued-laminated timber post and beam structures, nine cyclic tests on full-scale one-storey, one-bay timber post and beam construction specimens were carried out. Two reinforcement methods (wrapping fiber reinforced polymer (FRP) and implanting self-tapping screws) and two structural systems (simple frame and knee-braced frame) were considered in the experimental tests. Based on the experimental phenomena and test results, feasibility of the reinforcement was discussed, contribution between different methods was evaluated, and the seismic performances of the specimens were studied. Results showed that both the two reinforcement methods could restrain the development of crack, and recover the strength, stiffness and energy dissipation capacity. It also showed that the lateral resistance could be improved significantly when the failed simple frame retrofitted by reinforcing the joint and adding knee-brace, and this approach can be very practical in engineering.
Recent studies showed the need for timber connections with high fire performance. Connections of members in timber structures commonly comprise steel connectors, such as dowels, screws, nails and toothed plates. However, multiple studies have shown that the presence of exposed metal in timber connections leads to a poor performance under fire conditions. Replacing metallic fasteners with non-metallic fasteners potentially enhances the fire performance of timber connections. Previous studies showed that Glass Fibre Reinforced Polymer (GFRP) dowels can be a viable replacement for steel dowels and that Densified Veneer Wood functions well as a flitch plate material. However, as the resin matrix of GFRP dowels is viscoelastic, connection creep, which is not studied before, can be of concern. Also no research has been carried out on the fire performance of these connections. Therefore, a study of the creep behaviour and the fire performance of non-metallic timber connections comprising GFRP dowels and a Densified Veneer Wood flitch plate was performed, as is discussed in this thesis. Predictive models were proposed to determine the connection slip and load bearing capacity at ambient and elevated temperatures and in a fire. The material properties and heat transfer properties required for these models were determined experimentally and predictions of these models were experimentally validated. Furthermore, an adjustment of the predictive model of connection slip at ambient temperature allowed approximating the creep of the connection. The material properties, required for the creep model, were determined experimentally and predictions of the model were compared to results of longterm connection tests. The study confirmed that timber members jointed with non-metallic connectors have a significantly improved fire performance to timber joints using metallic connections. Models developed and proposed to predict fire performance gave accurate predictions of time to failure. It was concluded that non-metallic connections showed more creep per load per connector, than metallic connections. However, the ratio between initial deflection and creep (relative creep) and the ratio between load level and creep were shown to be similar for metallic and non-metallic connections.
Proceedings of the Institution of Civil Engineers - Construction Materials
The fire performance of heavy timber frame structures is often limited by the poor fire performance of its connections. Conventional timber connections, dowelled or toothed plate connections typically use steel as a connector material. In a fire, the steel parts rapidly conduct heat into the timber, leading to reduced fire performance. Replacing metallic connectors with alternative non-metallic, low thermal conductivity connector materials can, therefore, lead to improved connection performance in fire. This paper presents an experimental study into the fire performance of metal-free timber connections comprising a hot-pressed plywood flitch plate and glass-fibre-reinforced polymer dowels. The thermal behaviour of the connections at elevated temperatures is studied using a standard cone calorimeter apparatus and a novel heat transfer rate inducing system. The latter is a fire testing system developed at the University of Edinburgh. The mechanical behaviour of the connection during severe heating was also studied using an environmental chamber at temperatures up to 610°C. The results demonstrate that heat transfer in the non-metallic connections is governed by the thermal properties of the timber, resulting in significant enhancements in connection fire performance.