Skip header and navigation

13 records – page 1 of 2.

Advanced Methods of Encapsulation

https://research.thinkwood.com/en/permalink/catalogue41
Year of Publication
2015
Topic
Fire
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Ranger, Lindsay
Roy-Poirier, Audrey
Organization
FPInnovations
Year of Publication
2015
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Fire
Keywords
Codes
Encapsulation
Type X Gypsum Board
National Building Code of Canada
Tall Wood
Language
English
Research Status
Complete
Summary
This project aims to support the construction of tall wood buildings by identifying encapsulation methods that provide adequate protection of mass timber elements; the intention is that these methods could potentially be applied to mass timber elements so that the overall assembly could achive a 2 h fire resistance rating.
Online Access
Free
Resource Link
Less detail

Analysis of Full-Scale Fire-Resistance Tests of Structural Composite Lumber Beams

https://research.thinkwood.com/en/permalink/catalogue366
Year of Publication
2014
Topic
Fire
Material
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
PSL (Parallel Strand Lumber)
Application
Beams
Author
Dagenais, Christian
Organization
FPInnovations
Year of Publication
2014
Country of Publication
Canada
Format
Report
Material
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
PSL (Parallel Strand Lumber)
Application
Beams
Topic
Fire
Keywords
Encapsulation
Type X Gypsum Board
Fire Resistance
Full Scale
Language
English
Research Status
Complete
Summary
The key objective of this study is to analyze full-scale fire-resistance tests conducted on structural composite lumber (SCL), namely laminated veneer lumber (LVL), parallel strand lumber (PSL) and laminated strand lumber (LSL). A sub-objective is to evaluate the encapsulation performance of Type X gypsum board directly applied to SCL beams and its contribution to fire-resistance of wood elements. The test data is being used to further support the applicability of the newly developed Canadian calculation method for mass timber elements, recently implemented as Annex B of CSA O86-14.
Online Access
Free
Resource Link
Less detail

Development of a Clear Intumescent Coating for Mass Timber Construction: Fire Protection and Interior Application

https://research.thinkwood.com/en/permalink/catalogue2815
Topic
Fire
Application
Ceilings
Walls
Columns
Organization
National Research Council of Canada
Country of Publication
Canada
Application
Ceilings
Walls
Columns
Topic
Fire
Keywords
Intumescent Coating
Mass Timber
Encapsulated Mass Timber Construction
Encapsulation
Fire Resistance Rating
Research Status
In Progress
Notes
Project contact is Rokib Hassan at the National Research Council of Canada
Summary
Phase two of a four-phased research project, with the overarching goal of developing transparent intumescent coating (TIC) for mass timber construction, which would be technology certified, IP protected and licensed out. The use of TIC would ensure that fire resistance rating requirements are met while reducing the need for encapsulation, resulting in increased overall aesthetics provided by timber. Phase two focuses on demonstrating a proof-of-concept on a small scale and optimizing the TIC formula and coating thickness based on the testing results. Small scale tests will be conducted to measure fire resistance, weatherability and fire toxicity.
Less detail

Encapsulated Mass Timber Construction Char Rate Analysis

https://research.thinkwood.com/en/permalink/catalogue2387
Year of Publication
2020
Topic
Fire
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls

Encapsulation of Mass Timber Floor Surfaces

https://research.thinkwood.com/en/permalink/catalogue2528
Year of Publication
2020
Topic
Design and Systems
Fire
Material
NLT (Nail-Laminated Timber)
Glulam (Glue-Laminated Timber)
CLT (Cross-Laminated Timber)
Application
Floors

Fire Performance of Mass-Timber Encapsulation Methods and the Effect of Encapsulation on Char Rate of Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue758
Year of Publication
2016
Topic
Fire
Material
CLT (Cross-Laminated Timber)
Author
Hasburgh, Laura
Bourne, Keith
Dagenais, Christian
Ranger, Lindsay
Roy-Poirier, Audrey
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Topic
Fire
Keywords
Charring Rate
Encapsulation
Fire Resistance
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria
Summary
Twenty-three (23) cross-laminated timber (CLT) panels were exposed to a standard fire at an intermediate scale. This paper discusses several encapsulation methods used to increase the fire resistance of those panels, with emphasis on encapsulation times and the impact of encapsulation on the charring rate of CLTs. The encapsulation methods used included Type X gypsum board, intumescent coating, rock fibre insulation and spray applied fire-resistant materials (SFRM). The results suggest that encapsulation methods can significantly reduce wood charring rates in addition to delaying the time at which wood elements become involved in fire.
Online Access
Free
Resource Link
Less detail

Fire Safety Summary: Fire Research Conducted for the Project on Mid-Rise Wood Construction

https://research.thinkwood.com/en/permalink/catalogue43
Year of Publication
2014
Topic
Fire
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Walls
Author
Su, Joseph
Lougheed, Gary
Organization
National Research Council of Canada
Year of Publication
2014
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Walls
Topic
Fire
Keywords
Encapsulation
Mid-Rise
Safety
Tall Wood
Exterior Walls
Language
English
Research Status
Complete
Summary
Working in collaboration with the Canadian Wood Council and FPInnovations and in partnership with Natural Resources Canada and the governments of Ontario, Quebec and British Columbia, the National Research Council conducted a comprehensive research project, Research Consortium for Wood and Wood-Hybrid Mid-rise Buildings. This consortium project aimed to develop technical information that could be used to support acceptable solutions that meet the NBC’s objectives for fire safety, acoustics, and building envelope performance, in order to facilitate the use of wood-based structural materials in mid-rise buildings. The objectives of the Wood and Wood-Hybrid Midrise Buildings research project were to develop performance data and technical solutions in the areas of fire safety, acoustics and building envelope pertinent to the use of wood-based structural materials in mid-rise buildings, i.e. to develop an alternative solution to meet the 2010 NBC requirements for non-combustible construction for 5-6 storey (and taller) buildings. This project was intended to address the immediate needs for technical solutions for mid-rise wood buildings that do not compromise the minimum levels of safety and performance required by the 2010 NBC in the areas of fire safety and fire protection, acoustics, and building envelope performance.
Online Access
Free
Resource Link
Less detail

Solution for Mid-Rise Wood Construction: Apartment Fire Test with Encapsulated Lightweight Wood Frame Construction

https://research.thinkwood.com/en/permalink/catalogue344
Year of Publication
2014
Topic
Fire
Material
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Author
Taber, Bruce
Lougheed, Gary
Su, Joseph
Bénichou, Noureddine
Organization
National Research Council of Canada
Year of Publication
2014
Country of Publication
Canada
Format
Report
Material
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Topic
Fire
Keywords
Mid-Rise
Encapsulation
Language
English
Research Status
Complete
Summary
A research project, Wood and Wood-Hybrid Midrise Buildings, was undertaken to develop information to be used as the basis for alternative/acceptable solutions for mid-rise construction using wood structural elements. As part of this project, four large-scale fire experiments were conducted to evaluate the fire performance of two forms of encapsulated combustible structural wood systems, a lightweight wood-frame (LWF) system (2 experiments [3]) and a crosslaminated timber (CLT) system (1 experiment [4]). The fourth experiment [5] involved a test structure constructed using a steel frame system described below. Each experiment involved construction of a test set-up of an unsprinklered full-size apartment unit, intended to represent a portion of a mid-rise (e.g. six-storey) building. This report provides the results of the test with an encapsulated LWF setup representing an apartment in a mid-rise (e.g. six-storey) building.
Online Access
Free
Resource Link
Less detail

Solutions for Mid-Rise Wood Construction: Apartment Fire Test with Encapsulated Cross Laminated Timber Construction

https://research.thinkwood.com/en/permalink/catalogue144
Year of Publication
2014
Topic
Fire
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Author
Taber, Bruce
Lougheed, Gary
Su, Joseph
Bénichou, Noureddine
Organization
National Research Council of Canada
Year of Publication
2014
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Topic
Fire
Keywords
Encapsulation
Large Scale
Mid-Rise
Testing
Timber-Steel Hybrid
Language
English
Research Status
Complete
Summary
A research project, Wood and Wood-Hybrid Midrise Buildings, was undertaken to develop information to be used as the basis for alternative/acceptable solutions for mid-rise construction using wood structural elements. As part of this project, four large-scale fire experiments were conducted to evaluate the fire performance of two forms of encapsulated combustible structural wood systems, a lightweight wood-frame (LWF) system (2 experiments [3, 4]) and a crosslaminated timber (CLT) system (1 experiment). The fourth experiment [5] involved a test structure constructed using a steel frame system described below. Each experiment involved construction of a test set-up of an unsprinklered full-size apartment unit, intended to represent a portion of a mid-rise (e.g. six-storey) building. The structural elements used in the LWF system (wood stud walls and wood I-joist floors) and CLT system (3-ply wall panels and 5-ply floor panels) were all chosen on the basis of the types of construction that were currently being used in 5- and 6-storey mid-rise residential construction being built in the province of British Columbia, where the building code had changed earlier, in 2009, to permit such mid-rise combustible construction. This report provides the results of the experiment with an encapsulated CLT setup representing an apartment in a mid-rise (e.g. six-storey) building.
Online Access
Free
Resource Link
Less detail

Solutions for Mid-Rise Wood Construction: Cone Calorimeter Results for Encapsulation Materials

https://research.thinkwood.com/en/permalink/catalogue351
Year of Publication
2014
Topic
Fire
Material
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Author
Bijloos, Martin
Lougheed, Gary
Su, Joseph
Bénichou, Noureddine
Organization
National Research Council of Canada
Year of Publication
2014
Country of Publication
Canada
Format
Report
Material
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Topic
Fire
Keywords
Encapsulation
Cone Calorimeter
Mid-Rise
Language
English
Research Status
Complete
Summary
A research project, Wood and Wood-Hybrid Midrise Buildings, was undertaken to develop information to be used as the basis for alternative/acceptable solutions for mid-rise construction using wood structural elements. As part of this project, three materials were selected for investigation as encapsulation materials for combustible structural elements: Type X gypsum board (12.7 mm thick and 15.9 mm thick), cement board (12.7 mm thick), and gypsum-concrete (25 mm thick and 39 mm thick). This report documents the results of cone calorimeter tests conducted to investigate the performance of the three encapsulation materials.
Online Access
Free
Resource Link
Less detail

13 records – page 1 of 2.