The following topics in the field of seismic analysis and design of mid-rise (5- and 6-storey) wood-frame buildings are included in this paper: Determination of the building period, linear dynamic analysis of wood-frame structures, deflections of stacked multi-storey shearwalls, diaphragm classification, capacity-based design for woodframe...
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
April 13-15, 2012, Christchurch, New Zealand
Summary
The Nelson Marlborough Institute of Technology Arts and Media building was completed in 2011 and consists of three seismically separate complexes. This research focussed on the Arts building as it showcases the use of coupled post-tensioned timber shear walls. These are part of the innovative Expan system. Full-scale, in-situ dynamic testing of the novel building was combined with finite element modelling and updating to obtain an understanding of the structural dynamic performance within the linear range. Ambient testing was performed at three stages during construction and was combined with forced vibration testing for the final stage. This forms part of a larger instrumentation program developed to investigate the wind and seismic response and long term deformations of the building. A finite element model of the building was formulated and updated using experimental modal characteristics. It was shown that the addition of non-structural elements, such as cladding and the staircase, increased the natural frequency of the first mode and the second mode by 19% and 24%, respectively. The addition of the concrete floor topping as a structural diaphragm significantly increased the natural frequency of the first mode but not the second mode, with an increase of 123% and 18%, respectively. The elastic damping of the NMIT building at low-level vibrations was identified as being between 1.6% and 2.4%
Proceedings of the Institution of Civil Engineers - Construction Materials
Summary
Cross-laminated timber has, in the last 6 years, been used for the first time to form shear walls and cores in multi-storey buildings of seven storeys or more. Such buildings can have low mass in comparison to conventional structural forms. This low mass means that, as cross-laminated timber is used for taller buildings still, their dynamic movement under wind load is likely to be a key design parameter. An understanding of dynamic lateral stiffness and damping, which has so far been insufficiently researched, will be vital to the effective design for wind-induced vibration. In this study, an ambient vibration method is used to identify the dynamic properties of a seven-storey cross-laminated timber building in situ. The random decrement method is used, along with the Ibrahim time domain method, to extract the modal properties of the structure from the acceleration measured under ambient conditions. The results show that this output-only modal analysis method can be used to extract modal information from such a building, and that information is compared with a simple structural model. Measurements on two occasions during construction show the effect of non-structural elements on the modal properties of the structure.
We model the dynamic behavior of laminated curved beams on the assumption that the different layers of such structures are perfectly bonded at the interface and can show different flexural rotations from one another. We formulate a mechanical theory and a finite element model accounting for bending, shear, warping and extensional deformation modes, as well as radial, tangential and rotary inertias. The main novelty of the proposed theory consists of a generalization of layer-wise displacement approaches available in literature to the dynamics of beams with finite curvature. The work includes some numerical results related to the free vibration of laminated arches and showing different support conditions and aspect ratios to establish comparisons with different theories in the literature. We observe that an accurate mechanical modeling of curved laminated beams is crucial for correct estimation of the eigenfrequencies and eigenmodes of such structures within a 1D framework.
The Equivalent Viscous Damping (EVD) parameter is used to simplify the dynamic problem, passing from a non-linear solution of the system to a simple linear-elastic one. In the case of Direct Displacement-Based seismic Design (DDBD) methods, the EVD value allows direct design of structures, without an iterative computational process. This paper proposes a rational analytical formula to evaluate the EVD value of timber structures with dowel-type metal fastener connections. The EVD model is developed at the ultimate limit state, as a solution of the equilibrium problem related to an inelastic configuration. For a specific joint configuration, the EVD predicted via an analytical model was compared to experimental results. The proposed EVD model was validated using non-linear dynamic analysis on a portal frame, built with dowel-type fasteners arranged in two concentric crowns.
In this paper, the relations between the load-deformation property of the CLT connections and the seismic performance of the 3 story CLT construction are analytically discussed. The static and the dynamic properties of the CLT connections led each from the static and the dynamic tests were obviously different, however the analytical results based on these properties were agree each with the results of the static and the dynamic tests proving the adequateness of estimated properties. The further study on the dynamic effects of CLT connections is necessary.
This paper presents a numerical study conducted on a seven-story timber building made of cross-laminated (X-lam) panels, equipped with a linear translational tuned mass damper (TMD). The TMD is placed on the top of the building as a technique for reducing the notoriously high drifts and seismic accelerations of these types of structures. TMD parameters (mass, stiffness, and damping) were designed using a genetic algorithm (GA) technique by optimizing the structural response under seven recorded earthquake ground motions compatible, on average, with a predefined elastic spectrum. Time-history dynamic analyses were carried out on a simplified two-degree-offreedom system equivalent to the multistory building, while a detailed model of the entire building using two-dimensional elastic shell elements and elastic springs for modeling connections was used as a verification of the evaluated solution. Several comparisons between the response of the structure with and without TMD subjected to medium- and high-intensity recorded earthquake ground motions are presented, and the effectiveness and limits of these devices for improving the seismic performance of X-lam buildings are critically evaluated.
The paper presents a numerical study conducted on a seven storey cross-laminated (X-lam) buildings equipped with translational Tuned Mass Dampers (TMD’s), as a technique for reducing the notoriously high drifts and maximum seismic accelerations of these types of structures. The building was modelled in the finite element software package Abaqus using 2D elastic shell elements and non-linear springs, which were implemented as an external user subroutine and properly calibrated to simulate the cyclic behavior of connectors in X-lam buildings. The used TMD device is linear, and placed on the top of the building. Time-history dynamic analyses were carried out under natural earthquake ground motions. Several comparisons between the response of the structure with and without TMD are presented, and the effectiveness and limits of these devices to improve the seismic performance of X-lam buildings are critically discussed.
Vibrations induced by people walking is one of the most important issue in timber floor design. Low natural frequency and low mass require a careful analysis in order to prevent significant annoyance and to guarantee an acceptable human comfort. This paper is concerned with the assessment of vibration performance of a timber-concrete composite timber floor and a cross laminated timber floor used in two timber buildings under construction in Trento (Italy). Different approaches suggested by Standards and literature were employed: analytical methods, numerical analyses and laboratory tests. About analytical methods the uniformed distributed load deflection criterion (ULD), the Eurocode 5 criterion and some criterions from literature were compared, whereas the Vibration Dose Value (VDV) method, as suggested by ISO 10137, was used for the numerical models and the laboratory tests. The numerical analyses were carried out by means of a finite element modelling. The load due to footfall was simulated by static and dynamic vertical forces. The laboratory tests were characterized by thirty walking tests for each floor. Impact testing with modal hammer was also undertaken in order to investigate the dynamic properties of the specimens. All results are compared and discussed.
Preliminary results from an experimental program investigating the behaviour of retrofitted glulam beams subjected to static and dynamic loads are presented in this paper. The effect of glass fibre-reinforced-polymer (GFRP) laminates applied on the tension side was investigated under both static and dynamic loading as a potential retrofit on undamaged specimens. Furthermore, previously damaged beams were restored by applying GFRP confinement to the damaged region. The experimental results showed that the capacity of the retrofitted beams was improved significantly and the restored beams attained a significant level of their original dynamic capacity. Future work involves the development of a material predictive model that can account for the high-strain rate effects as well as investigating more retrofit options.
+Beams+Subjected+to+Simulated+Blast+Loads){kind=link}