In Phase I (2018-19) of this project on Prefabricated Heavy Timber Modular Construction, three major types of connections used in a stackable modular building were studied: intramodule connection, inter-module vertical connection, and inter-module horizontal connection. The load requirement and major design criteria were identified...
Advancement in engineered wood products altered the existing building height limitations and enhanced wooden structural members that are available on the market. These coupled with the need for a sustainable and green solution to address the ever-growing urbanization demand, avails wood as possible candidate for primary structural material in the construction industry. To this end, several researches carried out in the past decade to come up with sound structural solutions using a timber based structural system. Green and Karsh (2012) introduced the FFTT system; Tesfamariam et al. (2015) developed force-based design guideline for steel infilled with CLT shear walls, and SOM (2013) introduced the concrete jointed mass timber hybrid structural concepts. In this research, the basic structural concepts proposed by SOM (2013) is adopted. The objective of this research is to develop a wind and earthquake design guideline for concrete jointed tall mass timber buildings in scope from 10- to 40-storey office or residential buildings. The specific objective of this research is as follow:
Wind serviceability design guideline for hybrid mass-timber structures.
Calibration of design wind load factors for the serviceability wind design of hybrid tall mass timber structures.
Guidelines to perform probabilistic modeling, reliability assessment, and wind load factor calibration.
Overstrength related modification factor Ro and ductility related modification factor Rd for future implementation in the NBCC.
Force-based design guideline following the capacity based design principles.
This paper presents an experimental study on dowelled connections in cross-laminated timber (CLT) and laminated veneer lumber (LVL) using 20-mm mild steel dowels and internal steel plates. Connections designed to fail in brittle row shear and group tear-out were tested under monotonic loading...