Skip header and navigation

2 records – page 1 of 1.

Bending Tests on Glulam-CLT Beams connected with Double-Sided Punched Metal Plate Fasteners and Inclined Screws

https://research.thinkwood.com/en/permalink/catalogue320
Year of Publication
2015
Topic
Connections
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Beams
Floors
Author
Jacquier, Nicolas
Organization
Luleå University of Technology
Year of Publication
2015
Country of Publication
Sweden
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Beams
Floors
Topic
Connections
Mechanical Properties
Keywords
Bending Test
Shear Connections
Double-sided Punched Metal Plate
Inclined Screws
Language
English
Research Status
Complete
Summary
This report presents bending tests performed on composite beams made from glulam beams and cross laminated timber (CLT) panels. The composite beam, with a T-cross section, represents a section of a floor element in a multi-storey CLT construction system. The shear connections used were made either of doublesided punched metal plate fasteners, either of inclined screws, or of a combination of both fastener types. The screws are used to secure the shear connection with double-sided nail plates with respect to possible separation forces between the glulam and the CLT. An additional test with a screw glued connection was made for comparison as the upper bound case in terms of composite action. The results show the beams with double-sided nail plates (with or without screws) achieved a very high level of composite action and an overall satisfactory behaviour. Almost full composite action was achieved for the screw-glued composite beam. A detailed design example of the beam element according to the Eurocode 5 and Finnish National Annex is presented.
Online Access
Free
Resource Link
Less detail

Evaluation of Bending Tests on Composite Glulam-CLT Beams Connected with Double-Sided Punched Metal Plates and Inclined Screws

https://research.thinkwood.com/en/permalink/catalogue436
Year of Publication
2015
Topic
Connections
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Author
Jacquier, Nicolas
Girhammar, Ulf
Publisher
ScienceDirect
Year of Publication
2015
Country of Publication
Netherlands
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Connections
Mechanical Properties
Keywords
Multi-Storey
Four Point Bending Test
Shear connection
Double-sided Punched Metal Plate
Separation Forces
Language
English
Research Status
Complete
Series
Construction and Building Materials
Summary
This report presents bending tests performed on composite beams made from glulam beams and cross laminated timber (CLT) panels. The composite beam, with a T-cross section, represents a section of a floor element in a multi-storey CLT construction system. The shear connections used were made either of doublesided punched metal plate fasteners, either of inclined screws, or of a combination of both fastener types. The screws are used to secure the shear connection with double-sided nail plates with respect to possible separation forces between the glulam and the CLT. An additional test with a screw glued connection was made for comparison as the upper bound case in terms of composite action. The results show the beams with double-sided nail plates (with or without screws) achieved a very high level of composite action and an overall satisfactory behaviour. Almost full composite action was achieved for the screw-glued composite beam. A detailed design example of the beam element according to the Eurocode 5 and Finnish National Annex is presented.
Online Access
Free
Resource Link
Less detail