Skip header and navigation

1 records – page 1 of 1.

Production and In-Plane Compression Mechanics of Alternatively Angled Layered Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue1843
Year of Publication
2018
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Buck, Dietrich
Hagman, Olle
Publisher
North Carolina State University
Year of Publication
2018
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Mechanical Properties
Keywords
Manufacturing
Diagonal-Laminated Lumber
Panel Configuration
Compression Loads
Mass Timber
Research Status
Complete
Series
BioResources
Summary
Increasing awareness of sustainable building materials has led to interest in enhancing the structural performance of engineered wood products. This paper reports mechanical properties of cross-laminated timber (CLT) panels constructed with layers angled in an alternative configuration on a modified industrial CLT production line. Timber lamellae were adhesively bonded together in a single-step press procedure to form CLT panels. Transverse layers were laid at an angle of 45°, instead of the conventional 90° angle with respect to the longitudinal layers’ 0° angle. Tests were carried out on 20 five-layered CLT panels divided into two matched groups with either a 45° or a 90° configuration; an in-plane uniaxial compressive loading was applied in the principal orientation of the panels. These tests showed that the 45°-configured panels had a 30% higher compression stiffness and a 15% higher compression strength than the 90° configuration. The results also revealed that the 45°-configured CLT can be industrially produced without using more material than is required for conventional CLT 90° panels. In addition, the design possibility that the 45°-configured CLT can carry a given load while using less material also suggests that it is possible to use CLT in a wider range of structural applications.
Online Access
Free
Resource Link
Less detail