Skip header and navigation

2 records – page 1 of 1.

Bond Behavior of Glued-In Timber Joint with Deformed Bar Epoxied in Glulam

https://research.thinkwood.com/en/permalink/catalogue537
Year of Publication
2014
Topic
Connections
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Author
Ling, Zhibin
Liu, Weiqing
Yang, Huifeng
Lu, Weidong
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Topic
Connections
Mechanical Properties
Keywords
Glued-in Rods
Bond behavior
Withdrawal Strength
Pull-Pull tests
Failure Modes
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
This paper describes the test program of glued-in deformed bar timber joint conducted in pull-pull configuration, which aims to investigate the bond behavior of glued-in deformed bar systems in glulam. The varying parameter are bar slenderness ratio and glue-line thickness. In order to obtain the bond stress distribution along the anchorage length, special deformed bar with strain gauges attached internally were designed. Test results show that both the bar slenderness ratio and glue-line thickness have obvious influence on withdrawal strength and bond behavior of glued-in deformed bar joint. Failure modes of specimens are also analyzed in this paper. Ductile failure modes of glued-in rod timber joint could be realized with reasonable design.
Online Access
Free
Resource Link
Less detail

Numerical Simulation on Bond Behavior Between Glulam and Glued-In Rod

https://research.thinkwood.com/en/permalink/catalogue1607
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Author
Ling, Zhibin
Liu, Weiqing
Yang, Huifeng
Lu, Weidong
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Topic
Connections
Mechanical Properties
Keywords
Glued-In-Rod
Joints
Numerical Simulation
Stress-Slip
Bond Behavior
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2093-2099
Summary
Glued-in rod is a type of effective connector for timber structures. In the last decades, considerable researches have been conducted on the bond behavior between timber and glued-in rod experimentally and theoretically. This paper presents the numerical simulation on the bond behavior of glulam joints with glued-in steel rod. Glulam is modelled as the orthotropic elasto-plastic material. Adhesive and steel rods are modelled as isotropic materials. Non-linear spring element was employed to simulate the local bond stress-slip relations at different locations along the bonded length. The numerical results indicate that non-linear spring element can be used to simulate the bond behavior of the glued-in steel rod glulam joints effectively. Moreover, The numerical results obtained by considering the local bond relations at different locations is in a better agreement with the experimental results than that obtained based on the bond stress-slip relation at loaded end.
Online Access
Free
Resource Link
Less detail