Skip header and navigation

3 records – page 1 of 1.

Numerical Simulation on Bond Behavior Between Glulam and Glued-In Rod

https://research.thinkwood.com/en/permalink/catalogue1607
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Author
Ling, Zhibin
Liu, Weiqing
Yang, Huifeng
Lu, Weidong
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Topic
Connections
Mechanical Properties
Keywords
Glued-In-Rod
Joints
Numerical Simulation
Stress-Slip
Bond Behavior
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2093-2099
Summary
Glued-in rod is a type of effective connector for timber structures. In the last decades, considerable researches have been conducted on the bond behavior between timber and glued-in rod experimentally and theoretically. This paper presents the numerical simulation on the bond behavior of glulam joints with glued-in steel rod. Glulam is...
Online Access
Free
Resource Link
Less detail

Bond Between Glulam and NSM CFRP Laminates

https://research.thinkwood.com/en/permalink/catalogue331
Year of Publication
2013
Topic
Design and Systems
Material
Glulam (Glue-Laminated Timber)
Author
Sena-Cruz, José
Jorge, Marco
Branco, Jorge
Cunha, Vitor
Publisher
ScienceDirect
Year of Publication
2013
Country of Publication
Netherlands
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Topic
Design and Systems
Keywords
Carbon Fiber Reinforced Polymer
Pull-Out Tests
Bond behavior
Stress-Slip
Language
English
Research Status
Complete
Series
Construction and Building Materials
Summary
With the aim of evaluating the bond behaviour between glulam and carbon fibre reinforced polymer laminates strips, an experimental program using pull-out tests was carried, when the near-surface strengthening technique is applied. Two main variables were studied: the bond length and the type of pull-out test configuration. The instrumentation included the loaded and free-end slips, as well as the pullout force. Based on the obtained experimental results, and applying an analytical-numerical strategy, the local bond stress-slip relationship was determined. In this work the tests are described, the obtained results are presented and analysed, and the applicability of an inverse analysis to obtain the local bond law is demonstrated.
Online Access
Free
Resource Link
Less detail

Bond Behavior between Glulam and GFRP’s by Pullout Tests

https://research.thinkwood.com/en/permalink/catalogue560
Year of Publication
2011
Topic
Connections
Design and Systems
Material
Glulam (Glue-Laminated Timber)
Author
Sena-Cruz, José
Branco, Jorge
Jorge, Marco
Barros, Joaquim
Silva, Catarina
Cunha, Vitor
Publisher
ScienceDirect
Year of Publication
2011
Country of Publication
Netherlands
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Topic
Connections
Design and Systems
Keywords
GFRP
Bond behavior
Pull-Out Tests
Stress-Slip
Language
English
Research Status
Complete
Series
Composites Part B: Engineering
Summary
To evaluate the bond behavior between glulam and GFRP rods, applied according to the nearsurface mounted strengthening technique, an experimental program composed of beam and direct pullout tests was carried. In this experimental program three main variables were analyzed: the GFRP type, the GFRP location into the groove, and the bond length. From the monitoring system it was registered the loaded and free end slips, and the pullout force. Based on these experimental results, and applying an analytical-numerical strategy, the local bond stress-slip relationship was calculated. In this work the tests are described, the obtained results are presented and discussed, and the applicability of the inverse analysis to obtain the local bond law is demonstrated.
Online Access
Free
Resource Link
Less detail