This monitoring study aims to generate field performance data from a highly energy efficient building in the west coast climate as part of FPInnovations’ efforts to assist the building sector in developing durable and energy efficient wood-based buildings. A six-storey mixed-use building, with five storeys of wood-frame residential construction on top of concrete commercial space was completed in early 2018 in the City of Vancouver. It was designed to meet the Passive House standard. The instrumentation aimed to gather field data related to the indoor environment, building envelope moisture performance, and vertical movement to address the most critical concerns among practitioners for such buildings.
This study aims to generate moisture performance data for several configurations of highly insulated woodframe walls meeting the RSI 3.85 (R22 eff) requirement for buildings up to six storeys in the City of Vancouver. The overarching goal is to identify and develop durable exterior wood-frame walls to assist in the design and construction of energy efficient buildings across the country. Wall panels, each measuring 1200 mm wide and 2400 mm tall, form portions of the exterior walls of a test hut located in the rear yard of the FPInnovations laboratory in Vancouver. Twelve wall panels in six types of wall assemblies are undergoing testing in this first phase. This report, first in a series on this study, documents the initial construction and instrumentation.
Air leaks have a considerable impact on the energy load and durability of buildings, particularly in cold climates. In wood construction using cross-laminated timber (CLT), air leaks are most likely to be concentrated at the joints between panels and other elements. This study used simulations of heat, air, and moisture transfers through a gap between two CLT panels causing air leakage in winter conditions under a cold climate. A real leakage occurrence was sized to validate the simulations. The aim of this work was to assess the impact on the energy loads and the durability of an air leak, as either infiltration or exfiltration, for different gap widths and relative humidity levels. The results showed that infiltrations had a greater impact on the energy load than exfiltrations but did not pose a threat to the durability, as opposed to exfiltrations. Gap sizes in CLT may vary, but the effect on the energy load was sensitive to the leakage path in the rest of the wall. As expected, a combination of winter exfiltration and a high level of interior relative humidity was particularly detrimental.
This Illustrated Guide consolidates information on vaulted water-shedding roofs and flat waterproof membrane roofs that are capable of meeting R-30 or greater effective thermal performance when used on low- and mid-rise wood-frame buildings. The guide is intended to be an industry, utility, and government resource with respect to meeting this thermal performance level, while not compromising other aspects of building enclosure performance, including moisture management, air leakage, and durability.
This paper aims to develop an artificial neural network (ANN) to predict the energy consumption and cost of cross laminated timber (CLT) office buildings in severe cold regions during the early stage of architectural design. Eleven variables were selected as input variables including...
The study investigates the environmental benefits of reusing Cross Laminated Timber (CLT) panels. The Global Warming Potential (GWP) of a single-stored Coffee shop built in 2016 in Kobe city was calculated, considering different CLT reuse ratios, forest land-use and material substitution possibilities. The results showed that as the rate of reused CLT panel increases the total GWP decreases. Moreover, in all cases, the option with smallest GWP is when the surplus wood is used for carbon storage in the forest, revealing the importance of a growing forest for increasing the environmental benefits of timber utilisation. The results suggest the systematic reuse of CLT panels offers a possibility to increase the carbon stock of Japanese Cedar plantation forests and further mitigate the environmental impact of construction.
This paper focused on energy consumption and carbon emission for heating and cooling during a building’s operation stage, and examined the energy effects of using Cross Laminated Timber (CLT) as an alternative building material to reinforced concrete (RC) in China’s 31 key cities located in different climate zones...
IOP Conference Series: Earth and Environmental Science
According to the predictions of United Nations (2017) there are more than 7 billion people on Earth and this number will reach 9.7 billion by 2050. Today, most of the population lives in the urban areas and the rapid growth entails more construction in a housing sector. Since the industrial revolution the world has experienced countless technological attainments and on the other hand risky increase in natural resources use, energy consumption, greenhouse gases emission, ozone depletion, toxification and global temperature rising. The question how the cities can respond to urban growth is related to the sustainable goals of Agenda 2030. This research discusses potential of the usage of timber as construction material and it also brings the answer to this question. The wood is 100% renewable, recyclable and nontoxic material with capacity to absorb CO2 and perform low embodied energy. The increase of timber use in the construction contributes to sustainable development and to the reduction of waste, CO2 emission, as well as energy consumption. The aim of this paper is to discuss the advantages of using timber as a sustainable solution in urban context, in comparison with most commonly used concrete. The findings demonstrate the value of timber as sustainable construction material.
More and more people live in cities. The building industry is responsible for 33% of waste production and is set to increase further to 50% in 2025. The energy efficiency is continuously increased, but the waste production at the end of life of a building is largely ignored. This design proposes a solution in the form of a zero-waste high-rise design. It uses only recyclable or renewable materials. Mass-timber is chosen as the main material as it is not only renewable and easily reusable, it is also a storage of CO2. The design reuses the foundation of existing buildings, and with the lightweight properties of mass-timber, increases the density on the location by building taller. The design is four times taller as the current buildings. To allow for sustainable densification, the design offers public and collective qualities. The building has been designed is such a way to be easily refitted during its life cycle or to be completely disassembled at the end of life.
Use of timber as a construction material has entered a period of renaissance since the development of high-performance engineered wood products, enabling larger and taller buildings to be built. In addition, due to substantial contribution of the building sector to global energy use, greenhouse gas emissions and waste production, sustainable solutions are needed, for which timber has shown a great potential as a sustainable, resilient and renewable building alternative, not only for single family homes but also for mid-rise and high-rise buildings. Both recent technological developments in timber engineering and exponentially increased use of engineered wood products and wood composites reflect in deficiency of current timber codes and standards. This paper presents an overview of some of the current challenges and emerging trends in the field of seismic design of timber buildings. Currently existing building codes and the development of new generation of European building codes are presented. Ongoing studies on a variety topics within seismic timber engineering are presented, including tall timber and hybrid buildings, composites with timber and seismic retrofitting with timber. Crucial challenges, key research needs and opportunities are addressed and critically discussed.
This paper aims to investigate the energy saving and carbon reduction performance of cross-laminated timber residential buildings in the severe cold region of China through a computational simulation approach. The authors selected Harbin as the simulation environment, designed reference residential...
This report documents the instrumentation installed for monitoring moisture, indoor air quality and differential movement performance in a six-storey building located in the City of Vancouver. The building has five storeys of wood-frame construction above a concrete podium, providing 85 rental units for residential and commercial use...