Skip header and navigation

2 records – page 1 of 1.

Experimental Behavior of a Continuous Metal Connector for a Wood-Concrete Composite System

https://research.thinkwood.com/en/permalink/catalogue730
Year of Publication
2004
Topic
Connections
Design and Systems
Mechanical Properties
Material
Timber-Concrete Composite
PSL (Parallel Strand Lumber)
Application
Floors
Author
Clouston, Peggi
Civjan, Scott
Bathon, Leander
Publisher
Forest Products Society
Year of Publication
2004
Country of Publication
United States
Format
Journal Article
Material
Timber-Concrete Composite
PSL (Parallel Strand Lumber)
Application
Floors
Topic
Connections
Design and Systems
Mechanical Properties
Keywords
Pine
US
Continuous Steel Mesh
Steel Connectors
Push-Out Tests
Shear Strength
Stiffness
Bending Tests
Language
English
Research Status
Complete
Series
Forest Products Journal
Summary
The benefits of using shear connectors to join wood beams to a concrete slab in a composite floor or deck system are many. Studies throughout the world have demonstrated significantly improved strength, stiffness, and ductility properties from such connection systems as well as citing practical building advantages such as durability, sound insulation, and fire resistance. In this study, one relatively new shear connector system that originated in Germany has been experimentally investigated for use with U.S. manufactured products. The connector system consists of a continuous steel mesh of which one half is glued into a southern pine Parallam® Parallel Strand Lumber beam and the other half embedded into a concrete slab to provide minimal interlayer slip. A variety of commercial epoxies were tested for shear strength and stiffness in standard shear or “push out” tests. The various epoxies resulted in a variety of shear constitutive behaviors; however, for two glue types,shear failure occurred in the steel connector resulting in relatively high initial stiffness and ductility as well as good repeatability. Slip moduli and ultimate strength values are presented and discussed. Full-scale bending tests, using the best performing adhesive as determined from the shear tests, were also conducted. Results indicate consistent, near-full composite action system behavior
Online Access
Free
Resource Link
Less detail

Timber Rivets in Structural Composite Lumber

https://research.thinkwood.com/en/permalink/catalogue777
Year of Publication
2004
Topic
Connections
Material
LSL (Laminated Strand Lumber)
PSL (Parallel Strand Lumber)
Author
Wolfe, Ronald
Begel, Marshall
Craig, Bruce
Organization
Forest Products Laboratory
Year of Publication
2004
Country of Publication
United States
Format
Report
Material
LSL (Laminated Strand Lumber)
PSL (Parallel Strand Lumber)
Topic
Connections
Keywords
Pine
Poplar
Rivets
Failure
Language
English
Research Status
Complete
Summary
Timber rivet connections, originally developed for use with glulam construction, may be a viable option for use with structural composite lumber (SCL) products. Tests were conducted on small samples to assess the performance and predictability of timber rivet connections in parallel strand lumber (PSL) and laminated strand lumber (LSL). The test joint configurations were designed to exhibit ìrivet failuresîósome combination of rivet yield and bearing deformation in the compositeóas opposed to wood failure modes, such as block-shear tear-out or splitting. Results suggest that per-rivet design values should fall between 1 and 2 kN, depending on species and density of the composite and load direction with respect to grain of the composite strands. Timber rivets performed better in LSL than in PSL and better in yellow poplar PSL than in Douglas-fir or Southern Pine PSL; 40-mm rivets in yellow poplar LSL gave roughly equivalent performance to 65-mm rivets in yellow poplar PSL.
Online Access
Free
Resource Link
Less detail