Skip header and navigation

169 records – page 1 of 17.

2021 Edition of Technical Guide for the Design and Construction of Tall Wood Buildings in Canada

https://research.thinkwood.com/en/permalink/catalogue2585
Topic
Design and Systems
Application
Wood Building Systems
Organization
FPInnovations
Country of Publication
Canada
Application
Wood Building Systems
Topic
Design and Systems
Keywords
Structural
Seismic
Fire Performance
Vibration
Acoustics
Building Envelope
Sustainability
Prefabrication
Monitoring
Research Status
In Progress
Notes
Project contact is Erol Karacabeyli at FPInnovations
Summary
To support NRCan's Tall Wood Building Demonstration Initiative, FPInnovations developed and published the 2014 Edition of Technical Guide for the Design and Construction of Tall Wood Buildings in Canada. More than 80 technical professionals comprised of design consultants and experts from FPInnovations, the National Research Council, the Canadian Wood Council and universities were involved in its development. The Guide has gained national and worldwide reputation as one of the most complete and credible documents helping to introduce to the design and construction community, and Authorities Having Jurisdiction the terms "Mass Timber Construction" and "Hybrid Tall Wood Buildings". Since the publication of the First Edition, a number of tall wood buildings have been designed and constructed. Substantial regulatory changes are expected to happen based on the experience obtained from the demonstration initiative and the extensive research that has taken place domestically and internationally since the publication of the First Edition. These developments highlight a need for the Guide to be updated so that it aligns with efforts currently underway nationally and provincially and continues to lead in providing the design and construction community technical insight into new opportunities for building in wood. The First Edition of the Guide helped to focus the efforts of the early adopters who participated in NRCan's Tall Wood Building Demonstration Initiative. Updating and aligning the Guide with the release of the new National Building Code of Canada and the Canadian wood design standard (CSA O86), and sharing the experiences gained from tall wood buildings built since the First Edition, will not only continue to expand the base of early adopters, but also help to move aspects of mass timber and hybrid wood buildings into the mainstream.
Less detail

Achieving Sustainable Urban Buildings with Seismically Resilient Mass Timber Core Wall and Floor System

https://research.thinkwood.com/en/permalink/catalogue2802
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Cores
Walls
Floors
Wood Building Systems
Organization
Portland State University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Cores
Walls
Floors
Wood Building Systems
Topic
Design and Systems
Seismic
Keywords
Hold-Down
Seismic Performance
Core Walls
Parametric Analysis
Deformation Capacity
Overstrength
Mid-Rise
High-Rise
Tall Wood Buildings
Research Status
In Progress
Notes
Project contact is Peter Dusicka at Portland State University
Summary
The urgency in increasing growth in densely populated urban areas, reducing the carbon footprint of new buildings, and targeting rapid return to occupancy following disastrous earthquakes has created a need to reexamine the structural systems of mid- to high-rise buildings. To address these sustainability and seismic resiliency needs, the objective of this research is to enable an all-timber material system in a way that will include architectural as well as structural considerations. Utilization of mass timber is societally important in providing buildings that store, instead of generate, carbon and increase the economic opportunity for depressed timber-producing regions of the country. This research will focus on buildings with core walls because those building types are some of the most common for contemporary urban mid- to high-rise construction. The open floor layout will allow for commercial and mixed-use occupancies, but also will contain significant technical knowledge gaps hindering their implementation with mass timber. The research plan has been formulated to fill these gaps by: (1) developing suitable mid- to high-rise archetypes with input from multiple stakeholders, (2) conducting parametric system-level seismic performance investigations, (3) developing new critical components, (4) validating the performance with large-scale experimentation, and (5) bridging the industry information gaps by incorporating teaching modules within an existing educational and outreach framework. Situated in the heart of a timber-producing region, the multi-disciplinary team will utilize the local design professional community with timber experience and Portland State University's recently implemented Green Building Scholars program to deliver technical outcomes that directly impact the surrounding environment. Research outcomes will advance knowledge at the system performance level as well as at the critical component level. The investigated building system will incorporate cross laminated timber cores, floors, and glulam structural members. Using mass timber will present challenges in effectively achieving the goal of desirable seismic performance, especially seismic resiliency. These challenges will be addressed at the system level by a unique combination of core rocking combined with beam and floor interaction to achieve non-linear elastic behavior. This system behavior will eliminate the need for post-tensioning to achieve re-centering, but will introduce new parameters that can directly influence the lateral behavior. This research will study the effects of these parameters on the overall building behavior and will develop a methodology in which designers could use these parameters to strategically control the building seismic response. These key parameters will be investigated using parametric numerical analyses as well as large-scale, sub-system experimentation. One of the critical components of the system will be the hold-down, a device that connects the timber core to the foundation and provides hysteretic energy dissipation. Strength requirements and deformation demands in mid- to high-rise buildings, along with integration with mass timber, will necessitate the advancement of knowledge in developing this low-damage component. The investigated hold-down will have large deformation capability with readily replaceable parts. Moreover, the hold-down will have the potential to reduce strength of the component in a controlled and repeatable way at large deformations, while maintaining original strength at low deformations. This component characteristic can reduce the overall system overstrength, which in turn will have beneficial economic implications. Reducing the carbon footprint of new construction, linking rural and urban economies, and increasing the longevity of buildings in seismic zones are all goals that this mass timber research will advance and will be critical to the sustainable development of cities moving forward.
Resource Link
Less detail

Acoustical Performance of Mass Timber Building Elements

https://research.thinkwood.com/en/permalink/catalogue2553
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Floors
Walls
Country of Publication
Canada
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Floors
Walls
Topic
Acoustics and Vibration
Keywords
Sound Insulation
Acoustic Membrane
Acoustical Performance
Research Status
In Progress
Notes
Project contact is Jianhui Zhou at the University of Northern British Columbia
Summary
Building acoustics has been identified as one of the key subjects for the success of mass timber in the multi-storey building markets. The project will investigate the acoustical performance of mass timber panels produced in British Columbia. The apparent sound transmission class (ASTC) and impact insulation class (AIIC) of bare mass timber elements as wall and/ or floor elements will be measured through a lab mock-up. It is expected that a database of the sound insulation performance of British Columbia mass timber products will be developed with guidance on optimal acoustical treatments to achieve different levels of performance.
Less detail

Actuarial Contribution to the Understanding of Insurable Risks Related to Non-residential High-rise Buildings in CLT

https://research.thinkwood.com/en/permalink/catalogue2194
Topic
Market and Adoption
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Organization
Université Laval
Country of Publication
Canada
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Market and Adoption
Keywords
High-Rise
Non-Residential
Course of Construction Insurance
Research Status
In Progress
Notes
Project contact is Étienne Marceau at Université Laval
Summary
The objective of this project is to identify the risk factors taken into account in the pricing of an insurance contract for a construction site. This project aims to synthesize the quantitative approaches used in practice and presented in academic research for the pricing of home insurance and commercial insurance. Then, we aim to identify the preventive measures that can be taken to reduce the impact of different perils in the insurance of a construction site in wood or other.
Less detail

Advanced Quality and In-Service Condition Assessment Procedures for Mass Timber and Cross-Laminated Timber Products

https://research.thinkwood.com/en/permalink/catalogue2558
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Organization
Forest Products Laboratory
Mississippi State University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Topic
Mechanical Properties
Keywords
Non-Destructive Evaluation
Bond Performance
Monitoring Techniques
Serviceability
Quality Assurance
Research Status
In Progress
Notes
Project contacts are Frederico França at Mississippi State University and Robert J. Ross at the Forest Products Laboratory
Summary
With the rapid development of CLT manufacturing capacity around the world and the increasing architectural acceptance and adoption, there is a current and pressing need regarding adhesive bond quality assurance in manufacturing. As with other engineered glued composites, adhesive bondline performance is critically important. Bondline assessment requires technology in the form of sensors, ultrasonics, load cells, or other means of reliable machine evaluation. The objectives of this cooperative study are to develop quality assurance procedures for monitoring the quality of mass timber and CLT during and after manufacturing and to develop assessment techniques for CLT panels in-service.
Resource Link
Less detail

Advancement of Timber Panels as Structural Elements in Composite Floor Systems of Timber-Steel Hybrid Structures

https://research.thinkwood.com/en/permalink/catalogue2785
Topic
Design and Systems
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Floors
Hybrid Building Systems
Organization
Auburn University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Application
Floors
Hybrid Building Systems
Topic
Design and Systems
Keywords
Timber-Steel Hybrid
Research Status
In Progress
Summary
Auburn University’s (AU) School of Forestry and Wildlife Sciences (SFWS) in Alabama actively works to increase awareness of the benefits of CLT along with hybrid systems for more widespread adoption in multiple building segments. AU’s two-year project proposal outlines a plan that will establish a preliminary design for the usage of a timber-steel composite system, utilizing CLT or laminated veneer lumber (LVL), as an option that will replace reinforced concrete slabs to improve the structural performance for buildings six stories or more.
Less detail

Advancing Tall Mass Timber Buildings through Seismic Resilience Testing

https://research.thinkwood.com/en/permalink/catalogue2584
Topic
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Shear Walls
Wood Building Systems
Cores
Organization
University of Nevada
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Application
Shear Walls
Wood Building Systems
Cores
Topic
Seismic
Keywords
Rocking Walls
Shake Table Test
Mass Timber
Non-structural Components and Systems
Research Status
In Progress
Notes
Project contact is Keri Ryan at University of Nevada, Reno
Summary
A landmark shake table test of a 10-story mass timber building will be conducted in late 2020. The test program, funded by other sources, will help accelerate the adoption of economically competitive tall timber buildings by validating the seismic performance of a resilient cross-laminated timber (CLT) rocking wall system. In this project, we leverage and extend the test program by including critical nonstructural components and systems (NCS). Including NCSs, which are most vulnerable to rocking induced deformations of the CLT core, allows investigation of the ramification of this emerging structural type on building resiliency. Quantifying interactions amongst vertically and horizontally spanning NCSs during earthquake shaking will allow designers to develop rational design strategies for future installation of such systems. The expected research outcomes are to expand knowledge of rocking wall system interactions with various NCS, identify NCS vulnerabilities in tall timber buildings, and develop solutions to address these vulnerabilities. Moreover, this effort will greatly increase visibility of the test program. The results of this research will be widely disseminated to timber design and NCS communities through conference presentations, online webinars, and distribution to publicly accessible research repositories. 
Less detail

Analytical Modeling of Lateral Strength and Stiffness of Inclined Self-Tapping Screw Connection

https://research.thinkwood.com/en/permalink/catalogue2651
Topic
Mechanical Properties
Connections
Author
Zhao, Ruihan
Organization
University of Alberta
Country of Publication
Canada
Topic
Mechanical Properties
Connections
Keywords
Self-Tapping Screws
Lateral Strength
Lateral Stiffness
Withdrawal
Yield
Embedment
Research Status
In Progress
Summary
The objective of this research is to develop models for predicting lateral strength and stiffness of connections containing inclined self-tapping screws, by considering the contribution of the withdrawal and yield properties of the screws and embedment properties of the connecting members.
Resource Link
Less detail

An Uplift Friction Damper for Seismically Resilient Mass-Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue2799
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Hybrid Building Systems
Organization
Michigan Technological University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Hybrid Building Systems
Topic
Design and Systems
Seismic
Keywords
Seismic Force Resisting System
Uplift Friction Damper
Energy Dissipation
Self-Centering
Numerical Model
Tall Wood Buildings
National Earthquake Hazards Reduction Program
Research Status
In Progress
Notes
Project contact is Daniel Dowden at Michigan Technological University
Summary
This award will investigate a low-damage solution for cross-laminated timber (CLT) seismic force-resisting systems (SFRSs) using a novel uplift friction damper (UFD) device for seismically resilient mass-timber buildings. The UFD device will embrace the natural rocking wall behavior that is expected in tall CLT buildings, provide stable energy dissipation, and exhibit self-centering characteristics. Structural repair of buildings with these devices is expected to be minimal after a design level earthquake. Although CLT has emerged as a construction material that has revitalized the timber industry, there exists a lack of CLT-specific seismic energy dissipation devices that can integrate holistically with the natural kinematics of CLT-based SFRSs. CLT wall panels themselves do not provide any measurable seismic energy dissipation. As a payload to the large-scale, ten-story CLT building specimen to be tested on the Natural Hazards Engineering Research Infrastructure (NHERI) shake table at the University of California, San Diego, as part of NSF award 1636164, “Collaborative Research: A Resilience-based Seismic Design Methodology for Tall Wood Buildings,” this project will conduct a series of tests with the UFD devices installed on the CLT building specimen. These tests will bridge analytical and numerical models with the high fidelity test data collected with realistic boundary and earthquake loading conditions. The calibrated models will be incorporated in a probabilistic numerical framework to establish a design methodology for seismically resilient tall wood buildings, leading to a more diverse and eco-sustainable urban landscape. This project will provide local elementary school outreach activities, integrate participation of undergraduate minorities and underrepresented groups into the research activities, and foster graduate level curriculum innovations. Project data will be archived and made available publicly in the NSF-supported NHERI Data Depot (https://www.DesignSafe-CI.org). This award contributes to NSF's role in the National Earthquake Hazards Reduction Program (NEHRP). The research objectives of this payload project are to: 1) bridge the fundamental mechanistic UFD models linking analytical and numerical models necessary for seismic response prediction of seismically resilient CLT-based SFRSs, 2) characterize the fundamental dynamic UFD behavior with validation and calibration through large-scale tests with realistic boundary conditions and earthquake loadings, and 3) integrate low-damage, friction-based damping system alternatives within a resilience-based seismic design methodology for tall wood buildings. To achieve these objectives, the test data collected will provide a critical pathway to reliably establish numerical and analytical models that extend the shake table test results to a broad range of archetype buildings. The seismic performance of mass-timber archetype building systems will be established through collapse risk assessment using incremental dynamic analyses. This will provide a first step in the longer term goal of establishing code-based seismic performance factors for CLT-based SFRSs.
Resource Link
Less detail

Assessing Life-Cycle Environmental Impacts of CLT Mass Timber Buildings in the U.S. Northeast Region

https://research.thinkwood.com/en/permalink/catalogue2535
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Organization
Forest Products Laboratory
The Nature Conservancy
University of Washington
Consortium for Research on Renewable Industrial Materials
Atelierjones
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Topic
Environmental Impact
Keywords
Life-Cycle Assessment
GHG emission reduction
Research Status
In Progress
Notes
Project contact is Hongmei Gu at the Forest Products Laboratory
Summary
The FPL team is in charge of developing a full comparative LCA study for three multiple-story mass timber buildings and their concrete alternatives in the U.S. Northeast region, with Boston as the point location. Using these three comparative LCAs, this research will determine the GHG emissions reduction potential from mass timber use in the building sector for the U.S. region. This may increase potential for growth in wood utilization, timber harvest, and forest management practices through the market demands.
Resource Link
Less detail

169 records – page 1 of 17.