This document outlines the basis of design for the performance-based design and nonlinear response history analysis of the Framework Project in Portland, OR. Performance-based design is pursued for this project because the proposed lateral force-resisting system, consisting of post-tensioned rocking cross-laminated timber (CLT) walls is not included in ASCE/SEI 7-10 Table 12.2-1.
This project identifies drivers for, and barriers to, the increased use of prefabricated timber building (PTB) systems in Class 2 to 9 commercial buildings, such as apartments, hotels, office buildings and schools.
PTB systems in Australia are in a formative stage and yet to achieve broad acceptance in the marketplace as a conventional method of building.
Opportunities for PTB systems can use timber’s well-established benefits such as high strength-to-weight ratio; design and construction flexibility; general environmental credentials including carbon sequestration; and prefabrication’s suitability for use on brown-field, restricted access and difficult sites and developments. In addition legislative constraints have now been largely removed (e.g. through changes to the 2016 National Construction Code).
An increase in large scale mid-rise prefabricated buildings, and with the increasing nationalisation and internationalisation of the top tier building companies, suggests market acceptance will grow as PTB buildings are seen as ‘normal’.
Model building codes in the United States limit timber construction to six stories, due to concerns over fire safety and structural performance. With new timber technologies, tall timber buildings are now being planned for construction. The process for building approval for a building constructed above the code height limits with a timber load-bearing structure...
A. Fire Test Results Summary
B. Test 1a (Test 1): Beam-Exterior Column Connection Report
C. Test 1a (Test 2): Beam-Exterior Column Connection Report
D. Test 1a (Test 3): Beam-Exterior Column Connection Report
E. Test 1a (Test 4): Beam-Exterior Column Connection Report
F. Test 1b (Test 1): CLT Deck to Beam Report
G. Test 1b (Test 2): CLT Deck to Beam Report
H. Test 1b (Test 3): CLT Deck to Beam Report
I. Test 1c: Penetrations Fire Resistance Rating Report (TBD)
J. Test 1d: Wall Fire Resistance Rating Report