This project identifies drivers for, and barriers to, the increased use of prefabricated timber building (PTB) systems in Class 2 to 9 commercial buildings, such as apartments, hotels, office buildings and schools.
PTB systems in Australia are in a formative stage and yet to achieve broad acceptance in the marketplace as a conventional method of building.
Opportunities for PTB systems can use timber’s well-established benefits such as high strength-to-weight ratio; design and construction flexibility; general environmental credentials including carbon sequestration; and prefabrication’s suitability for use on brown-field, restricted access and difficult sites and developments. In addition legislative constraints have now been largely removed (e.g. through changes to the 2016 National Construction Code).
An increase in large scale mid-rise prefabricated buildings, and with the increasing nationalisation and internationalisation of the top tier building companies, suggests market acceptance will grow as PTB buildings are seen as ‘normal’.
Model building codes in the United States limit timber construction to six stories, due to concerns over fire safety and structural performance. With new timber technologies, tall timber buildings are now being planned for construction. The process for building approval for a building constructed above the code height limits with a timber load-bearing structure...
Nail-Laminated Timber (NLT) and box beam are efficient and economical engineered wood products. Although NLT has been used in North America for more than a century, only in recent years it has gained renewed interests as they have been seen as the most economical panel products used in mass timber buildings. Box beams, on the other hand, are lightweight and generally possess higher strength and stiffness than comparable-sized solid timber and are more efficient than solid timber large spans and loads.
In this report, existing design provisions and their limitations for the design and construction of NLT in box beam in Canadian standards are reviewed. For NLT, there is a general lack of information related to manufacturing, design and construction to ensure consistent manufacturing and installation practices. Therefore, it is difficult to research and document with confidence the full range of performance that can be achieved with NLT. It is therefore recommended that a North American product standard and design information on structural performance, floor vibration, fire resistance, acoustic performance, and construction risk mitigation measures (e.g. moisture and fire) be developed.
In CSA 086, design methods are limited to box beams with flanges and webs bonded with glue. As the flanges and webs of a box beam can be assembled by either glue or mechanical fasteners, it is recommended that design provisions for box beam with mechanical joints be also developed. With the information in Eurocode 5 and relevant supporting research papers, it is ready to be implemented.
Tall buildings pose a unique challenge to the sustainability movement because they offer both positive and negative environmental impacts. Positive impacts include reducing urban sprawl, promoting alternative transportation, and allowing efficient energy...