The use of cross-laminated timber (CLT) in residential and non-residential buildings is becoming increasingly popular in North America. While the 2016 supplement to the 2014 edition of the Canadian Standard for Engineering Design in Wood, CSAO86, provides provisions for CLT structures used in platform type applications, it does not provide guidance for the in-plane...
The Task Group on Combustible Construction is in the process of evaluating a proposed code change request related to buildings of encapsulated mass timber construction (EMTC). As part of the analysis of the code change request, an impact analysis is required that includes a cost-benefit analysis.
Hanscomb was hired to provide a cost-benefit analysis and to compare the estimated value of the following:
1. The cost of constructing a building of mass timber (unprotected) versus a building constructed of encapsulated mass timber (e.g. mass timber protected with a double layer of Type X gypsum board) versus a traditional concrete and steel building.
2. The time to build a building of mass timber construction (unprotected) versus a building of encapsulated mass timber construction versus a traditional concrete and steel building.
3. The annual maintenance costs of building of mass timber construction versus a building of encapsulated mass timber construction versus a traditional concrete and steel building.
For the purposes of this study two sets of conceptual floor plans and elevations have been created:
1. A 12 storey building with a Group C major occupancy (residential) where each storey is 6,000 m2 in floor area.
2. A 12 storey building with a Group D major occupancy (office) where each storey is 7,200 m2 in floor area.
A. Fire Test Results Summary
B. Test 1a (Test 1): Beam-Exterior Column Connection Report
C. Test 1a (Test 2): Beam-Exterior Column Connection Report
D. Test 1a (Test 3): Beam-Exterior Column Connection Report
E. Test 1a (Test 4): Beam-Exterior Column Connection Report
F. Test 1b (Test 1): CLT Deck to Beam Report
G. Test 1b (Test 2): CLT Deck to Beam Report
H. Test 1b (Test 3): CLT Deck to Beam Report
I. Test 1c: Penetrations Fire Resistance Rating Report (TBD)
J. Test 1d: Wall Fire Resistance Rating Report
Cross-laminated timber shear wall systems are used as a lateral load resisting system in multistory timber buildings. Walls at each level typically bear directly on the floor panels below and are connected by nailed steel brackets. Design guidance for the lateral-load resistance of such systems is not well established and design...