Skip header and navigation

10 records – page 1 of 1.

A Case Study on The Construction of a CLT Building Without a Preliminary Roof

https://research.thinkwood.com/en/permalink/catalogue2185
Year of Publication
2019
Topic
Moisture
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
General Application
Author
Liisma, Eneli
Liseth Kuus, Babette
Kukk, Villu
Kalamees, Targo
Publisher
Kaunas University of Technology
Year of Publication
2019
Country of Publication
Lithuania
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
General Application
Topic
Moisture
Design and Systems
Keywords
Moisture Safety
Building Quality
Building Technology
Moisture Content
Language
English
Research Status
Complete
Series
Journal of Sustainable Architecture and Civil Engineering
Notes
DOI link: https://doi.org/10.5755/j01.sace.25.2.22263
ISSN
2335–2000
Online Access
Free
Resource Link
Less detail

Durability of Structural Lumber Products after Exposure at 82C and 80% Relative Humidity

https://research.thinkwood.com/en/permalink/catalogue784
Year of Publication
2005
Topic
Mechanical Properties
Moisture
Material
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Solid-sawn Heavy Timber
Application
General Application
Author
Green, David
Evans, James
Hatfield, Cherilyn
Byrd, Pamela
Organization
Forest Products Laboratory
Year of Publication
2005
Country of Publication
United States
Format
Report
Material
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Solid-sawn Heavy Timber
Application
General Application
Topic
Mechanical Properties
Moisture
Keywords
Aspen
Douglas-Fir
Modulus of Elasticity
Modulus of Rupture
Southern Pine
Poplar
Relative Humidity
SPF
Temperature
Flexural Properties
Language
English
Research Status
Complete
Summary
Solid-sawn lumber (Douglas-fir, southern pine, Spruce– Pine–Fir, and yellow-poplar), laminated veneer lumber (Douglas-fir, southern pine, and yellow-poplar), and laminated strand lumber (aspen and yellow-poplar) were heated continuously at 82°C (180...
Online Access
Free
Resource Link
Less detail

Environmental Response of a CLT Floor Panel: Lessons for Moisture Management and Monitoring of Mass Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue2161
Year of Publication
2018
Topic
Site Construction Management
Serviceability
Moisture
Material
CLT (Cross-Laminated Timber)
Application
Floors

Evolution of the Building Envelope in Modern Wood Construction

https://research.thinkwood.com/en/permalink/catalogue1799
Year of Publication
2017
Topic
Design and Systems
Energy Performance
Moisture
Site Construction Management
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Light Frame (Lumber+Panels)
LVL (Laminated Veneer Lumber)
Application
Building Envelope
Author
Wang, Jieying
Organization
FPInnovations
Year of Publication
2017
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Light Frame (Lumber+Panels)
LVL (Laminated Veneer Lumber)
Application
Building Envelope
Topic
Design and Systems
Energy Performance
Moisture
Site Construction Management
Keywords
Energy Efficiency
Building Envelope
Tall Wood
Wood Infill Walls
Podium Structures
Articulated Buildings
Language
English
Research Status
Complete
Summary
This report provides an overview of major changes occurred in the recent decade to design and construction of the building envelope of wood and wood-hybrid construction. It also covers some new or unique considerations required to improve building envelope performance, due to evolutions of structural systems, architectural design, energy efficiency requirements, or use of new materials. It primarily aims to help practicioners better understand wood-based building envelope systems to improve design and construction practices. The information provided should also be useful to the wood industry to better understand the demands for wood products in the market place. Gaps in research are identified and summarized at the end of this report.
Online Access
Free
Resource Link
Less detail

Moisture Monitoring and Modeling of Mass-Timber Building Systems

https://research.thinkwood.com/en/permalink/catalogue1833
Year of Publication
2018
Topic
Moisture
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Kordziel, Steven
Glass, Samuel
Pei, Shiling
Zelinka, Samuel
Tabares-Velasco, Paulo
Organization
Forest Products Laboratory
Year of Publication
2018
Country of Publication
Korea
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Moisture
Keywords
Moisture Monitoring
Hygrothermal Properties
High-Rise
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 20-23,2018. Seoul, Republic of Korea
Summary
The use of mass timber structural products in tall building applications (6–20 stories) is becoming more common around the world including North America. A potential concern is the environmental wetting of mass timber products during construction because such products may dry out more slowly than light-frame structural lumber, and wood, as an organic material, is susceptible to deterioration at elevated moisture contents. In order to better understand the moisture conditions present in high rise timber constructions, a long-term moisture monitoring program was implemented on an eight story, mixed-use, mass timber framed building in Portland, Oregon. The building was monitored with an array of moisture meters to track moisture content throughout the building’s construction and operation. This paper presents data covering a period just over one year starting from the manufacture of crosslaminated timber (CLT) panels. Hygrothermal properties of CLT samples of the same type used in the building were measured in the laboratory, and wetting and drying experiments on representative CLT samples were conducted. Simulated moisture contents using a one-dimensional hygrothermal model compared reasonably well with laboratory experiments and building site measurements.
Online Access
Free
Resource Link
Less detail

Moisture Monitoring Throughout the Construction and Occupancy of Mass Timber Builidings

https://research.thinkwood.com/en/permalink/catalogue1834
Year of Publication
2018
Topic
Moisture
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Zelinka, Samuel
Glass, Samuel
Kordziel, Steven
Tabares-Velasco, Paulo
Pei, Shiling
Organization
Forest Products Laboratory
Publisher
University of Victoria
Year of Publication
2018
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Moisture
Keywords
Dimensional Instability
Microbial Attack
Fastener Corrosion
Cracking
Construction
Language
English
Conference
International Conference on New Horizons in Green Civil Engineering
Research Status
Complete
Notes
April 25-27,2018. Victoria, Canada
Summary
This paper presents preliminary findings from an ongoing research program instrumenting CLT buildings to measure wood moisture content. An overview of the research program is presented along with data from first year of moisture monitoring in an 8-story building in Portland, Oregon. This project measures the wood moisture content throughout the construction cycle, including the fabrication, shipping, staging, and erection of the panels. These preliminary field measurements can help characterize moisture changes in CLT during construction and guide the construction of future CLT buildings.
Online Access
Free
Resource Link
Less detail

Monitoring Moisture Performance of Cross-Laminated Timber Building Elements during Construction

https://research.thinkwood.com/en/permalink/catalogue2102
Year of Publication
2019
Topic
Site Construction Management
Moisture
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

Nail-Laminated Timber Canadian Design and Construction Guide

https://research.thinkwood.com/en/permalink/catalogue2243
Edition
1.1
Year of Publication
2017
Topic
Design and Systems
Acoustics and Vibration
Connections
Fire
General Information
Moisture
Seismic
Site Construction Management
Material
NLT (Nail-Laminated Timber)
Application
Floors
Roofs
Editor
Holt, Rebecca
Luthi, Tanya
Dickof, Carla
Edition
1.1
Publisher
Binational Softwood Lumber Council
Forestry Innovation Investment
Year of Publication
2017
Country of Publication
Canada
Format
Book
Material
NLT (Nail-Laminated Timber)
Application
Floors
Roofs
Topic
Design and Systems
Acoustics and Vibration
Connections
Fire
General Information
Moisture
Seismic
Site Construction Management
Language
English
Research Status
Complete
Summary
This Design and Construction Guide (the Guide) provides the Canadian design and construction industry with immediate support and guidance to ensure safe, predictable, and economical use of NLT. It is intended to offer practical strategies, advice, and guidance, transferring knowledge and lessons learned from those with experience. This Guide focuses on design and construction considerations for floor and roof systems pertaining to current Canadian construction practice and standards. While NLT is being used for vertical elements for walls, stair shafts, and elevator shafts, this Guide provides the greatest depth of direction for common horizontal applications. The information included here is supplemental to wood design and construction best practices and is specific to the application of NLT. Built examples are included to illustrate real application and visual reference as much as possible.
Online Access
Free
Resource Link
Less detail

Nail-Laminated Timber U.S. Design and Construction Guide

https://research.thinkwood.com/en/permalink/catalogue834
Edition
1.0
Year of Publication
2017
Topic
Acoustics and Vibration
Connections
Design and Systems
Fire
General Information
Moisture
Seismic
Site Construction Management
Material
NLT (Nail-Laminated Timber)
Application
Floors
Roofs
Editor
Holt, Rebecca Luthi, Tanya Dickof, Carla
Edition
1.0
Publisher
Binational Softwood Lumber Council
Year of Publication
2017
Country of Publication
United States
Format
Book
Material
NLT (Nail-Laminated Timber)
Application
Floors
Roofs
Topic
Acoustics and Vibration
Connections
Design and Systems
Fire
General Information
Moisture
Seismic
Site Construction Management
Language
English
Research Status
Complete
Summary
This Design and Construction Guide (the Guide) provides the U.S. design and construction community with guidance to ensure safe, predictable, and economical use of NLT. It is intended to offer practical strategies, advice, and guidance, transferring knowledge and lessons learned from NLT project experience. This Guide focuses on design and construction considerations for floor and roof systems pertaining to U.S. construction practice and standards. While NLT is being used for vertical elements for walls, stair shafts, and elevator shafts, this Guide provides the greatest depth of direction for more common horizontal applications. The information included here is supplemental to wood design and construction best practices and is specific to the application of NLT. Built examples are included to illustrate real application and visual reference as much as possible.
Online Access
Free
Resource Link
Less detail

Numerical Modelling of the Hygro-Thermal Response of Timber Bridges During their Service Life: A Monitoring Case-Study

https://research.thinkwood.com/en/permalink/catalogue2167
Year of Publication
2013
Topic
Serviceability
Moisture
Material
Timber (unspecified)
Application
Bridges and Spans

10 records – page 1 of 1.