Project contact is Étienne Marceau at Université Laval
The objective of this project is to identify the risk factors taken into account in the pricing of an insurance contract for a construction site. This project aims to synthesize the quantitative approaches used in practice and presented in academic research for the pricing of home insurance and commercial insurance. Then, we aim to identify the preventive measures that can be taken to reduce the impact of different perils in the insurance of a construction site in wood or other.
Although not yet seen as common practice, building with cross laminated timber (CLT) is gaining momentum in North America. Behind the scenes of the widely publicized project initiatives such as the Wood Innovation Design Centre Building in Canada and the...
In this project, a conceptual but realistic 20-storey building of hybrid construction incorporating massive timber panels and other structural materials was identified. The project team, consisting of three practicing consultants and 6 graduate student and post-doctoral researchers from NEWBuildS, undertook an analysis and engineering design of the demonstration building. An advisory group that includes FPInnovations scientists, NEWBuildS supervisors of the graduate students and Post Doctoral Fellows, provides technical support to the project team. The performance attributes addressed in the project were structural performance under seismic and wind load, fire resistance and building envelope. . This publication documents the analysis and design of the demonstration building, and identifies technical issues that require further study.
In this study market opportunities for treated glue-laminated (glulam) products were investigated in the industrial wood sector. The main benefits of treated glulam are through-product treatment and the ability to manufacture treated products in shapes and sizes that do not fit into common treating chambers. These attributes provide for very durable and large glulam structures that are appropriate for outdoor use. For these reasons bridges, power poles, and sound abatement barriers were investigated. These are markets where wood has lost market share to or is being challenged by concrete and steel substitutes.
The vehicular bridge market was once heavy to the use of wood. Today wood accounts for only 7% of the number bridges in the US and less than 0.9% of the actual surface area of bridges in place. In interviewing municipalities in Canada it is clear that wood is not the preferred material with many wood bridges being replaced by concrete. Further, none of the municipalities contacted were planning wood bridges. However, wood bridges are still being installed. In the US 0.9% of the bridges installed by area in 2007 were wood. This is good news as wood is holding its market share. Steering clear of high volume or large bridges, local bridges are well suited for wood as they are plentiful, small in scale, and many are in disrepair. If 20% of local bridges were built with wood in Canada this would have equalled approximately $51 million in wood bridge construction in 2007.
Municipalities are much more open to the use of wood for pedestrian bridges and overpasses. Their quick construction and aesthetics are positive attributes in this application. One municipality contacted is planning multiple wood pedestrian bridges in the next five years. However, for the purpose of this market review there is little published information on pedestrian bridges.
Noise abatement barriers are a good high-volume technical fit for treated glulam. Increases in traffic and current road infrastructure improvements will lead to more demand for sound abatement in the future. This market is dominated by concrete, but at a very high price. If treated glulam can give adequate durability and sound performance properties it would be approximately 20% cheaper than concrete. The market for sound barriers in Canada could utilize up to 10 mmbf of wood per year to construct 80 km of barrier. This product can also be marketed as a high-performance acoustic fence for residential markets.
Treated glulam was also considered for utility poles. It is transmission grade poles where glulam would best fit the market as the demand is for longer poles which are more difficult to get in solid wood. This type of pole is where wood is currently being displaced by tubular steel. If glulam poles were used in 25% of the replacement transmission poles per year this could equal 8 mmbf. Light poles or standards are another market to consider. While this is a relatively low volume market glulam light standards are a premium product in European markets.
Cross-laminated timber (CLT) is a building system based on the use of massive, multi-layered solid wood panels. Although CLT as a construction system has been successful in Europe, only a handful of CLT projects have been built in the U.S. This manuscript presents the results from qualitative research, carried out with the objective of assessing the market potential and barriers to the adoption of CLT in the U.S. Insights from national and international experts were collected using semi-structured interviews. Topics included perceived benefits and disadvantages of CLT as a construction system, major barriers to its adoption in the U.S., and level of awareness about CLT among the architecture community.
Sustainable Northwest (SNW) and Hacienda Community Development Group (HCDC), both based in Oregon, have proposed a plan to demonstrate pathways for building affordable housing with regionally sourced mass timber. In response to the region’s housing shortage, the partners’ proposal demonstrates the use of mass timber products while supporting efforts to educate stakeholders on wood product companies and forest restoration. The project outlines a plan to explore financing options, build one or more prototypes, and perform a structural material life cycle analysis.