This article presents the seismic performance of a timber frame with three-dimensional (3D) rigid connections. The connections were made with self-tapping screws and hardwood blocks were used to support the beams. The frame was designed to resist high se...
Timber building construction has been traditionally utilized to reduce inertial demands in high seismic regions. Applications in the United States however, are often limited to low-rise buildings of light-wood construction with distributed load bearing shear walls. Recent advancements in timber technologies are pushing mass timber systems...
International Nondestructive Testing and Evaluation of Wood Symposium
In this report, wooden members of sizes typically used in bridge construction are examined using x-ray computerized tomography (CT) to determine the presence of internal decay. This report is part of an overall study in which Douglas-fir (Pseudotsuga menziesii) glue-laminated (glulam) beams and solid sawn timbers were inoculated with brown rot fungus, Fomitopsis pinicola, and exposed to aboveground conditions approximately 25 miles (40 km) north of Gulfport, Mississippi, USA. The goal of the overall study is to develop interior decay within the test specimens and then identify and characterize the decay using a variety of nondestructive testing (NDT) techniques. One NDT technique used is x-ray CT. The pixel brightness (PB) of CT scan images is proportional to the specific gravity (SG) at that location; high SG materials appear brighter whereas low SG materials appear darker. The consumption of wood by fungus decreases the wood SG; however, fungal progression takes place in areas where sufficient moisture is present. The presence of moisture increases wood SG as detected by the CT scan, which masks the effect of the fungal decay, which is a common co-occurrence with many NDT techniques. To identify incipient decay, it is necessary to examine the ring structure both within and outside of the area of moisture. Quantifying the extent of the decay requires correlating the PB to known SG values for both dry wood and wood of varying moisture content. In this report, the relationship between wood SG, moisture content, and PB was quantified.