Skip header and navigation

5 records – page 1 of 1.

Experimental Investigation on Eccentric Compression Performance of Semirigid Joints in Reticulated Timber Shells

https://research.thinkwood.com/en/permalink/catalogue1780
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Shell Structures
Author
Sun, Xiaoluan
Liu, Weiqing
Lu, Weidong
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Shell Structures
Topic
Connections
Mechanical Properties
Keywords
Compression Tests
Joints
Bending Stiffness
Bending Capacity
Failure Modes
Ductility
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5463-5470
Abstract
Compression tests were conducted on the glulam members under different eccentricities, including three cases of 0mm,50mm and 100mm respectively, to study the mechanical performance of the new assemblage joints in reticulated timber shells. The bending stiffness and bending capacity of joints were evaluated, at the same time, the influence of failure mode and the changes...
Online Access
Free
Resource Link
Less detail

Numerical Simulation on Bond Behavior Between Glulam and Glued-In Rod

https://research.thinkwood.com/en/permalink/catalogue1607
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Ling, Zhibin
Liu, Weiqing
Yang, Huifeng
Lu, Weidong
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Connections
Mechanical Properties
Keywords
Glued-In-Rod
Joints
Numerical Simulation
Stress-Slip
Bond Behavior
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2093-2099
Abstract
Glued-in rod is a type of effective connector for timber structures. In the last decades, considerable researches have been conducted on the bond behavior between timber and glued-in rod experimentally and theoretically. This paper presents the numerical simulation on the bond behavior of glulam joints with glued-in steel rod. Glulam is...
Online Access
Free
Resource Link
Less detail

Reinforcing Glued Laminated Timber with AB Initio Embedded Steel Sheets

https://research.thinkwood.com/en/permalink/catalogue1758
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Koj, Christoph
Trautz, Martin
Pranjic, Andrija
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Connections
Mechanical Properties
Keywords
Reinforcement
Steel Sheets
Joints
Ductile
Load-Bearing Behavior
Adhesives
Strength
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5049-5057
Abstract
To enable high strength connections of glulam elements a new method of reinforcing the glulam with steel sheets has been developed. The steel sheets are installed ‘ab initio’ during the production process of the glulam. In the conducted series of test suitable adhesives and treatments of the steel surface have been selected and evaluated...
Online Access
Free
Resource Link
Less detail

Stiffness of Dowelled Steel-to-Timber Joints

https://research.thinkwood.com/en/permalink/catalogue1497
Year of Publication
2016
Topic
Mechanical Properties
Connections
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Xu, Bo-Han
Yuan, Dong-Wei
Bouchaïr, Abdelhamid
Racher, Patrick
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Connections
Keywords
Stiffness
Dowels
Steel-to-Timber
Joints
Tensile Load
Codes
National Design Specifications for Wood Construction (NDSR)
Eurocode
Grain Orientation
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 219-226
Abstract
The mechanical behaviour of timber structures is significantly influenced by the stiffness, load-carrying capacity and ductility of the joints. This study is focused on the stiffness of dowelled steel-to-timber joints, which were subjected to tensile loadings at different orientations with regard to the grain direction (0°, 30°, 45°, 60° and 90°)...
Online Access
Free
Resource Link
Less detail

A Study on Portal Frame Structure with Combined Column for Timber Building

https://research.thinkwood.com/en/permalink/catalogue1761
Year of Publication
2016
Topic
Mechanical Properties
Seismic
Material
Glulam (Glue-Laminated Timber)
Application
Frames
Author
Kohara, Katsuhiko
Inada, Masaru
Hoshiai, Kentaro
Tabata, Masaru
Fukumoto, Mitsuo
Komoto, Kazuyoshi
Takimoto, Minoru
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Frames
Topic
Mechanical Properties
Seismic
Keywords
Shearing Tests
Joints
Bending Tests
Static Loading Tests
Seismic Performance
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5173-5182
Abstract
Our research team developed a portal frame structure with the combined columns that made with the glued-laminated timbers (GLT) for general large scale office, store or school. As preliminary examination, the examinations of the joints and the materials were conducted. The 2 specimens of 2 specifications were conducted the...
Online Access
Free
Resource Link
Less detail