Skip header and navigation

52 records – page 1 of 6.

Accuracy Evaluation of Gamma-Method for Deflection Prediction of Partial Composite Beams

https://research.thinkwood.com/en/permalink/catalogue1911
Year of Publication
2018
Topic
Mechanical Properties
Design and Systems
Material
Timber-Concrete Composite
Application
Wood Building Systems
Beams

Acoustic Performance of Timber and Timber-Concrete Composite Floors

https://research.thinkwood.com/en/permalink/catalogue684
Year of Publication
2014
Topic
Acoustics and Vibration
Material
LVL (Laminated Veneer Lumber)
Timber-Concrete Composite
Application
Floors
Author
Schluessel, Marc
Shrestha, Rijun
Crews, Keith
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Timber-Concrete Composite
Application
Floors
Topic
Acoustics and Vibration
Keywords
New Zealand
Australia
Building Code of Australia
Sound Insulation
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
A major problem in light-weight timber floors is their insufficient performance coping with impact noise in low frequencies. There are no prefabricated solutions available in Australia and New Zealand. To rectify this and enable the implementation of light-weight timber floors, a structural floor was designed and built in laminated veneer lumber (LVL). The floor was evaluated in a laboratory setting based on its behaviour and then modified with suspended ceilings and different floor toppings. Twenty-nine different floor compositions were tested. The bare floor could not reach the minimum requirement set by the Building Code of Australia (BCA) but with additional layers, a sufficient result of R'w+Ctr 53 dB and L’nT,w + CI 50 dB was reached. Doubling of the concrete mass added a marginal improvement. With concrete toppings and suspended ceiling it is possible to reach the goal in airborne and impact sound insulation. The best result was achieved by combining of additional mass and different construction layers.
Online Access
Free
Resource Link
Less detail

Adhesive-Bonded Timber-Concrete Composites - Experimental Investigation of Thermal-Hygric Effects

https://research.thinkwood.com/en/permalink/catalogue1519
Year of Publication
2016
Topic
Serviceability
Mechanical Properties
Material
Timber-Concrete Composite
Author
Seim, Werner
Eisenhut, Lars
Kühlborn, Sonja
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Concrete Composite
Topic
Serviceability
Mechanical Properties
Keywords
Climate
Long-term
Shear Strength
Deformation
Temperature
Moisture Content
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 597-605
Summary
The advantages of the two different building construction materials, timber and concrete, can be used effectively in adhesive-bonded timber-concrete composite constructions. The long-term behavior was investigated experimentally on small-scale shear and bond specimens under artificial, alternating climatic conditions and on fullscale specimens under natural climatic conditions for an application in construction practice. The development of the shear strength and the deformation behavior under permanent loads were studied, focusing on the different material behavior of wood and concrete regarding changes in temperature and moisture. The general applicability of adhesivebonded timber-concrete composites in construction practice was proved in the investigations.
Online Access
Free
Resource Link
Less detail

Assessment of Timber Floor Vibration Performance: A Case Study in Italy

https://research.thinkwood.com/en/permalink/catalogue147
Year of Publication
2014
Topic
Acoustics and Vibration
Design and Systems
Material
CLT (Cross-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Author
Casagrande, Daniele
Piazza, Maurizio
Franciosi, Alessandro
Pederzolli, Federico
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Topic
Acoustics and Vibration
Design and Systems
Keywords
Dynamic
Eurocode
ISO
Italy
Natural Frequency
Numerical analysis
Testing
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
Vibrations induced by people walking is one of the most important issue in timber floor design. Low natural frequency and low mass require a careful analysis in order to prevent significant annoyance and to guarantee an acceptable human comfort. This paper is concerned with the assessment of vibration performance of a timber-concrete composite timber floor and a cross laminated timber floor used in two timber buildings under construction in Trento (Italy). Different approaches suggested by Standards and literature were employed: analytical methods, numerical analyses and laboratory tests. About analytical methods the uniformed distributed load deflection criterion (ULD), the Eurocode 5 criterion and some criterions from literature were compared, whereas the Vibration Dose Value (VDV) method, as suggested by ISO 10137, was used for the numerical models and the laboratory tests. The numerical analyses were carried out by means of a finite element modelling. The load due to footfall was simulated by static and dynamic vertical forces. The laboratory tests were characterized by thirty walking tests for each floor. Impact testing with modal hammer was also undertaken in order to investigate the dynamic properties of the specimens. All results are compared and discussed.
Online Access
Free
Resource Link
Less detail

Behavior of Timber-Concrete Composite Beams with Two Types of Steel Dowel Connectors

https://research.thinkwood.com/en/permalink/catalogue1996
Year of Publication
2018
Topic
Connections
Mechanical Properties
Material
Timber-Concrete Composite
Application
Beams
Author
Molina, Julio
Calil Junior, Carlito
Year of Publication
2018
Country of Publication
South Korea
Format
Conference Paper
Material
Timber-Concrete Composite
Application
Beams
Topic
Connections
Mechanical Properties
Keywords
Steel Dowels
Strength
Stiffness
Mohler Model
Shear Tests
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Online Access
Free
Resource Link
Less detail

Behaviour of Mass Timber Panel-Concrete Connections with Inclined Self-Tapping Screws and Insulation Layer

https://research.thinkwood.com/en/permalink/catalogue1984
Year of Publication
2018
Topic
Mechanical Properties
Connections
Material
Timber-Concrete Composite
CLT (Cross-Laminated Timber)
Application
Floors

Bonded Timber-Concrete Composite Floors with Lightweight Concrete

https://research.thinkwood.com/en/permalink/catalogue1699
Year of Publication
2016
Topic
Connections
Material
Timber-Concrete Composite
Application
Floors
Author
Schmid, Volker
Zauft, Doreen
Polak, Maria
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Concrete Composite
Application
Floors
Topic
Connections
Keywords
Lightweight Concrete
Epoxy
Adhesives
Manufacturing
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 4360-4367
Summary
This paper examines a new and very promising concept for prefabricated timber-concrete-composite floors (TCC-floors), were the heavy normal weight concrete is replaced by a lightweight concrete (LC) with a density of about 17 kN/m³. Investigations into the connections between lightweight concrete and timber indicate that the...
Online Access
Free
Resource Link
Less detail

Calculative Cost and Process Analysis of Timber-Concrete-Composite Ceilings with Focus on Effort and Performance Values for Cost Calculations of Multi-Storey Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue1753
Year of Publication
2016
Topic
Cost
Material
Timber-Concrete Composite
CLT (Cross-Laminated Timber)
Application
Ceilings
Author
Koppelhuber, Joerg
Leitenbauer, Alexander
Heck, Detlef
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Concrete Composite
CLT (Cross-Laminated Timber)
Application
Ceilings
Topic
Cost
Keywords
Prefabrication
Multi-Storey
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5006-5014
Summary
Composite structures use the advantages of two materials – timber and concrete – and improve the efficiency of a material application. Especially the concept of timber-concrete-composite ceilings has synergetic effects to achieve an effective ratio of thickness to span with high cost effectiveness simultaneously. Following the systematic...
Online Access
Free
Resource Link
Less detail

CLT-Lightweight Concrete Composite Beam with Adhesive Connection

https://research.thinkwood.com/en/permalink/catalogue1701
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
Timber-Concrete Composite
CLT (Cross-Laminated Timber)
Application
Beams
Author
Kanócz, Ján
Bajzecerová, Viktória
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Concrete Composite
CLT (Cross-Laminated Timber)
Application
Beams
Topic
Connections
Mechanical Properties
Keywords
Adhesives
Lightweight Concrete
Deformation
Vibration
Load Carrying Capacity
Shear
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 4378-4385
Summary
In the presented paper, results of theoretical and experimental investigation of timber-concrete composite members with adhesive connection are described. For the timber part of composite beams Cross Laminated Timber and for concrete part lightweight concrete was used. For the composite connection special adhesive to bounding wet...
Online Access
Free
Resource Link
Less detail

A Comparative Life Cycle Assessment Approach of Two Innovative Long Span Timber floors with its Reinforced Concrete Equivalent in an Australian Context

https://research.thinkwood.com/en/permalink/catalogue2375
Year of Publication
2015
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Wood Building Systems
Author
Basaglia, Bella
Lewis Kirsten
Shrestha, Rijun
Crews, Keith
Publisher
School of Civial Engineering, The University of Queensland
Year of Publication
2015
Country of Publication
Australia
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Wood Building Systems
Topic
Environmental Impact
Keywords
Sustainable Materials
LCA
Life-Cycle Assessment
Mid-Rise
Concrete
Language
English
Conference
International Conference on Performance-based and Life-cycle Structural Engineering
Research Status
Complete
Online Access
Free
Resource Link
Less detail

52 records – page 1 of 6.