Skip header and navigation

73 records – page 1 of 8.

Accelerated Curing of Large Scale Glued-in-Rods

https://research.thinkwood.com/en/permalink/catalogue2018
Year of Publication
2018
Topic
Mechanical Properties
Connections
Material
LVL (Laminated Veneer Lumber)

Accurate Strength Parameters for Fasteners with Examples for Ring Shank Nails

https://research.thinkwood.com/en/permalink/catalogue1510
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
Author
Munch-Andersen, Jørgen
Svensson, Staffan
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Topic
Connections
Mechanical Properties
Keywords
Withdrawal Test
Ring Shank Nails
Fasteners
Strength
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 344-352
Summary
Strength parameters for fasteners determined in accordance with the methods prescribed for the European CE-marking leads to quite different values for seemingly similar products from different manufactures. The results are hardly repeatable, to some extent due to difficulties in selecting representative timber samples for the testing. Beside this uncertainty, the declared values available to the designer concerns only structural timber, so no strength parameters are available for common engineered wood products such as LVL or plywood
Online Access
Free
Resource Link
Less detail

Acoustic Performance of Timber and Timber-Concrete Composite Floors

https://research.thinkwood.com/en/permalink/catalogue684
Year of Publication
2014
Topic
Acoustics and Vibration
Material
LVL (Laminated Veneer Lumber)
Timber-Concrete Composite
Application
Floors
Author
Schluessel, Marc
Shrestha, Rijun
Crews, Keith
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Timber-Concrete Composite
Application
Floors
Topic
Acoustics and Vibration
Keywords
New Zealand
Australia
Building Code of Australia
Sound Insulation
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
A major problem in light-weight timber floors is their insufficient performance coping with impact noise in low frequencies. There are no prefabricated solutions available in Australia and New Zealand. To rectify this and enable the implementation of light-weight timber floors, a structural floor was designed and built in laminated veneer lumber (LVL). The floor was evaluated in a laboratory setting based on its behaviour and then modified with suspended ceilings and different floor toppings. Twenty-nine different floor compositions were tested. The bare floor could not reach the minimum requirement set by the Building Code of Australia (BCA) but with additional layers, a sufficient result of R'w+Ctr 53 dB and L’nT,w + CI 50 dB was reached. Doubling of the concrete mass added a marginal improvement. With concrete toppings and suspended ceiling it is possible to reach the goal in airborne and impact sound insulation. The best result was achieved by combining of additional mass and different construction layers.
Online Access
Free
Resource Link
Less detail

Ambient and Forced Vibration Testing and Finite Element Model Updating of a Full-Scale Posttensioned Laminated Veneer Lumber Building

https://research.thinkwood.com/en/permalink/catalogue1103
Year of Publication
2012
Topic
Seismic
Wind
Acoustics and Vibration
Material
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Shear Walls
Author
Worth, Margaret
Omenzetter, Piotr
Morris, Hugh
Year of Publication
2012
Country of Publication
New Zealand
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Shear Walls
Topic
Seismic
Wind
Acoustics and Vibration
Keywords
Post-Tensioned
Full Scale
In Situ
Finite Element Model
Dynamic Performance
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
April 13-15, 2012, Christchurch, New Zealand
Summary
The Nelson Marlborough Institute of Technology Arts and Media building was completed in 2011 and consists of three seismically separate complexes. This research focussed on the Arts building as it showcases the use of coupled post-tensioned timber shear walls. These are part of the innovative Expan system. Full-scale, in-situ dynamic testing of the novel building was combined with finite element modelling and updating to obtain an understanding of the structural dynamic performance within the linear range. Ambient testing was performed at three stages during construction and was combined with forced vibration testing for the final stage. This forms part of a larger instrumentation program developed to investigate the wind and seismic response and long term deformations of the building. A finite element model of the building was formulated and updated using experimental modal characteristics. It was shown that the addition of non-structural elements, such as cladding and the staircase, increased the natural frequency of the first mode and the second mode by 19% and 24%, respectively. The addition of the concrete floor topping as a structural diaphragm significantly increased the natural frequency of the first mode but not the second mode, with an increase of 123% and 18%, respectively. The elastic damping of the NMIT building at low-level vibrations was identified as being between 1.6% and 2.4%
Online Access
Free
Resource Link
Less detail

An Analytical, Numerical and Experimental Study of Non-Metallic Mechanical Joints for Engineered Timber Constructions

https://research.thinkwood.com/en/permalink/catalogue1606
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
Author
Bazu, Gheorghe
Mahjourian Namari, Siavash
Wehsener, Jörg
Hartig, Jens
Haller, Peer
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Topic
Connections
Mechanical Properties
Keywords
GFRP
Densified Veneer Wood
Plates
Dowels
Load Bearing Behaviour
Analytical Model
Numerical Model
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2059-2068
Summary
Timber structures are strongly depending on the design of connections, which are mostly constructed from steel components. However, these joints have a number of limitations such as the tendency to be heavy, proneness to corrosion and often poor aesthetic appearances. Therefore, this study aims to replace metallic joints by non-metallic materials. An experimental testing program was performed to investigate the use of glass fiber reinforced plastics (GFRP), densified veneer wood (DVW) and laminated veneer lumber (LVL) in the form of plates and dowels in different test configurations. Analytical and numerical models were developed to better understand the load-bearing behaviour and to perform static verifications. The models were validated based on the experimental results. The results demonstrate that the use of GFRP dowels in combination with GFRP plates can provide a robust connection system for contemporary applications.
Online Access
Free
Resource Link
Less detail

An Equivalent Truss Method for the Analysis of Timber Diaphragms

https://research.thinkwood.com/en/permalink/catalogue112
Year of Publication
2015
Topic
Design and Systems
Mechanical Properties
Material
Light Frame (Lumber+Panels)
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Glulam (Glue-Laminated Timber)
Application
Floors
Author
Moroder, Daniel
Smith, Tobias
Pampanin, Stefano
Buchanan, Andrew
Year of Publication
2015
Country of Publication
Australia
Format
Conference Paper
Material
Light Frame (Lumber+Panels)
CLT (Cross-Laminated Timber)
LVL (Laminated Veneer Lumber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Design and Systems
Mechanical Properties
Keywords
Diaphragms
Equivalent Truss Method
Fasteners
Forces
Deflection
Torsion
Language
English
Conference
Pacific Conference on Earthquake Engineering
Research Status
Complete
Notes
November 6-8, 2015, Sydney, Australia
Summary
Recent years have seen more architects and clients asking for tall timber buildings. In response, an ambitious timber community has been proposing challenging plans and ideas for multi-storey commercial and residential timber buildings. While engineers have been intensively looking at gravity-load-carrying elements as well as walls, frames and cores to resist lateral loads, floor diaphragms have been largely neglected. Complex floor geometries and long span floor diaphragms create stress concentrations, high force demand and potentially large deformations. There is a lack of guidance and regulation regarding the analysis and design of timber diaphragms so structural engineers need a practical alternative to simplistic equivalent deep beam analysis or costly finite element modelling. This paper proposes an equivalent truss method capable of solving complex geometries for both light timber framing and massive timber diaphragms. Floor panels are discretized by equivalent diagonals, having the same stiffness as the panel including its fasteners. With this method the panel unit shear forces (shear flow) and therefore fastener demand, chord forces and reaction forces can be evaluated. Because panel stiffness is accounted for, diaphragm deflection, torsional effects and transfer forces can also be assessed.
Online Access
Free
Resource Link
Less detail

An Experimental Study on Buckling Strength with Laminated Veneer Lumber of Three Wood Species

https://research.thinkwood.com/en/permalink/catalogue1575
Year of Publication
2016
Topic
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
Author
Kambe, Wataru
Nakamura, Madoka
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Topic
Mechanical Properties
Keywords
Japanese Larch
Japanese Cypress
Japanese Cedar
Compression Test
Deflection
Strain
Buckling Strength
Slenderness Ratio
Bending Deflection
Maximum Strength
Yield Strength
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 1698-1706
Summary
In the past study, we conducted compression tests with laminated veneer lumber of Japanese Larch. We observed the deflection and strain behaviour. As a result we could evaluate the bucking strength with Euler’s equation and Tetmajer’s method. For structural design we should expand the versatility of that method. Three wood species for structural members would be selected for these tests. Those were Japanese larch, Japanese cypress and Japanese cedar. For the test parameter, we set the 8types of slenderness ratio for the compression test and we conducted monotonic compression tests with pin-supported on both edges. For the mechanical properties we conducted compression tests with short column members and got yield compression for those materials. In the compression tests, we could see the bending deflection. We would get the ratio the maximum strength and yield strength for distinguish the limited slenderness ratio. As a result it was cleared that the limit slenderness ratio of these wood species was 100. And we could confirm that the Tetmajer’s method is useful for evaluation the yield strength.
Online Access
Free
Resource Link
Less detail

Assessment of Carbon Footprint of Laminated Veneer Lumber Elements in a Six Story Housing - Comparison to a Steel and Concrete Solution

https://research.thinkwood.com/en/permalink/catalogue2135
Year of Publication
2013
Topic
Environmental Impact
Design and Systems
Material
LVL (Laminated Veneer Lumber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

Calculation of Sound Insulation for Hybrid CLT Fabricated with Lumber and LVL and Comparison with Experimental Data

https://research.thinkwood.com/en/permalink/catalogue2216
Year of Publication
2019
Topic
Acoustics and Vibration
Material
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Author
Ju, Zehui
Zhang, Haiyang
Zhan, Tianyi
Hong, Lu
Lin, Yangfan
Lu, Xiaoning
Publisher
EDP Sciences
Year of Publication
2019
Country of Publication
France
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Topic
Acoustics and Vibration
Keywords
Sound Insulation
Language
English
Research Status
Complete
Series
MATEC Web of Conferences
Online Access
Free
Resource Link
Less detail

Carterton Events Centre Auditorium Pres-Lam Wall Design and Construction

https://research.thinkwood.com/en/permalink/catalogue38
Year of Publication
2012
Topic
Seismic
Material
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Shear Walls
Author
Dekker, Dave
Chung, Stanley
Palermo, Alessandro
Year of Publication
2012
Country of Publication
New Zealand
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Shear Walls
Topic
Seismic
Keywords
Lateral Loads
Post-Tensioned
Pres-Lam
Sustainability
Language
English
Conference
New Zealand Society for Earthquake Engineering Conference
Research Status
Complete
Notes
April 13-15, 2012, Christchurch, New Zealand
Summary
Driven by sustainability, locally available resources and expertise, and economy, the design of the Carterton Events Centre focused on timber for the majority of the main structural and non-structural components. Combined with a client desire for minimization of earthquake damage, dissipative post-tensioned rocking...
Online Access
Free
Resource Link
Less detail

73 records – page 1 of 8.