This paper investigates the risk of disproportionate collapse following extreme loading events. The methodology mimics a sudden removal of a loadbearing wall of a twelve-storey CLT building. The ductility-demand from the dynamic simulation is checked against the ductility supplied by the structural components and their connections. The analyses focus on rotational stiffness (k) of the joints by considering three different sub-structural idealisations according to the required modelling details and the feasibility of model reductions. To resist the imposed dynamic forces, the required k-values may be too large to be practically achieved by means of off-the-shelf brackets and screw connections. Improved structural detailing as well as adequate thickness of structural elements need to be considered in order to reduce the probability of disproportionate collapse.
This research considers the effect of in-plane rotation angles on the structural performance of Cross Laminated Timber (CLT) panels. In the interest of expanding the application of CLT to folded or freeform structures, rectangular CLT panels are likely to be divided into irregular geometries, in which case the loading will be applied at an intermediate orientation between the longitudinal and transverse panel axes. Such a loading condition is not accounted for in the existing analytical methods for dimensioning and designing with CLT. An analytical method is proposed which hybridizes the Shear Analogy method with Hankinson’s equation, allowing a designer to determine the effective stiffness of a CLT panel with any layup and at any in-plane rotation angle. An analytical study, followed by implementation with 3D parametric Finite Element Modelling and an experimental investigation, is used to evaluate this method. Results show that cross-grain/in-plane rotation has considerable effect on strength and stiffness of CLT panels with fewer than 5 laminations.
This paper summarises the experimental and numerical investigation conducted on the main connection of a novel steel-timber hybrid system called FFTT. The component behaviour of the hybrid system was investigated using quasi-static monotonic and reversed cyclic tests. Different steel profiles (wide flange I-sections and hollow rectangular sections) and embedment approaches for the steel profiles (partial and full embedment) were tested. The results demonstrated that when using an appropriate connection layout, the desired strong-column weak-beam failure mechanism was initiated and excessive wood crushing was avoided. A numerical model was developed that reasonably reflected the real component behaviour and can subsequently be used for numerical sensitivity studies and parameter optimization. The research presented herein serves as a precursor for providing design guidance for the FFTT system as an option for tall wood-hybrid buildings in seismic regions.