This report describes a full-scale exterior wall fire test conducted on December 16, 2014 on a Nordic cross-laminated timber (CLT) wall system. The test was conducted in accordance with CAN/ULC-S134-13, Standard Method of Fire Test of Exterior Wall Assemblies. The test was conducted using the exterior wall fire test facility located in the Burn Hall of the NRC Fire Laboratory, Mississippi Mills, Ontario. The CLT wall system was assembled to represent a continuous solid wood wall covered by a water barrier membrane and insulation. The pilot burners were lit prior to the commencement of the test. Gas flow to the burners was manually adjusted to follow the prescribed heat input required by the standard.