Skip header and navigation

10 records – page 1 of 1.

Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: Acoustic Performance of Innovative Composite Wood Stud Partition Walls

https://research.thinkwood.com/en/permalink/catalogue1181
Year of Publication
2018
Topic
Design and Systems
Mechanical Properties
Acoustics and Vibration
Application
Walls
Author
Lin Hu
Samuel Cuerrier-Auclair
James Deng
Xiang-Ming Wang
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Application
Walls
Topic
Design and Systems
Mechanical Properties
Acoustics and Vibration
Keywords
Sound Insulation
Manufacturing
Partition Walls
Steel
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Airborne sound insulation performance of wall assemblies is a critical aspect which is directly associated with the comfort level of the occupants, which in turn affects the market acceptance...
Online Access
Payment Required
Resource Link
Less detail

Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: Proposed Vibration-Controlled Design Criterion for Supporting Beams

https://research.thinkwood.com/en/permalink/catalogue1178
Year of Publication
2018
Topic
Acoustics and Vibration
Mechanical Properties
Application
Floors
Author
Lin Hu
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Application
Floors
Topic
Acoustics and Vibration
Mechanical Properties
Keywords
Floor Supporting Beam
Bending Stiffness
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
For wood floor systems, their vibration performance is significantly dependent on the conditions of their supports, specifically the rigidity of the support. Detrimental effects could result if the floor supports do not have sufficient rigidity. This is special ture for floor supporting beams. The problem of vibrating floor due to flexible...
Online Access
Payment Required
Resource Link
Less detail

Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: Structural Performance of Post-Tensioned CLT Shear Walls with Energy Dissipators

https://research.thinkwood.com/en/permalink/catalogue1472
Year of Publication
2018
Topic
Design and Systems
Mechanical Properties
Seismic
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
LVL (Laminated Veneer Lumber)
LSL (Laminated Strand Lumber)
Application
Shear Walls
Author
Zhiyong Chen
Marjan Popovski
Paul Symons
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
LVL (Laminated Veneer Lumber)
LSL (Laminated Strand Lumber)
Application
Shear Walls
Topic
Design and Systems
Mechanical Properties
Seismic
Keywords
Compression Tests
Compression Strength
Energy Dissipation
Post-Tensioned
Pres-Lam
Monotonic Loading
Reverse Cyclic Loading
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
The latest developments in seismic design philosophy have been geared towards developing of so called "resilient" or "low damage" innovative structural systems that can reduce damage to the structure while offering the same or higher levels of safety to occupants. One such innovative structural system is the Pres-Lam system that is a wood-hybrid system that utilizes post-tensioned (PT) mass timber components in both rigid-frame and wall-based buildings along with various types of energy disspators. To help implement the Pres-Lam system in Canada and the US, information about the system performance made with North American engineered wood products is needed. That information can later be used to develop design guidelines for the designers for wider acceptance of the system by the design community. ...
Online Access
Payment Required
Resource Link
Less detail

Chapter 3: Structural Design of Cross-Laminated Timber Elements

https://research.thinkwood.com/en/permalink/catalogue809
Year of Publication
2011
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Sylvain Gagnon
Marjan Popovski
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Experimental
Flexural Properties
Stiffness
Strength
Analytical Approach
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Various methods have been adopted in Europe for the determination of design properties of CLT. Some of these methods are experimental in nature while others are analytical. Other methods involve a combination of both empirical and analytical approaches...
Online Access
Free
Resource Link
Less detail

Chapter 3: Structural Design of Cross-Laminated Timber Elements

https://research.thinkwood.com/en/permalink/catalogue822
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Loren Ross
Sylvain Gagnon
Edward Keith
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Flexural Properties
Modulus of Rupture
Shear
Stiffness
Strength
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
Building using cross-laminated timber (CLT) began in Europe about two decades ago and has used a variety of methods for structural analysis. Experimental testing methods were the most accurate, yet they lacked versatility because changes in lay-up, material, or even manufacturing methods could cause a need for new testing. Consequently, three analytical approaches have been created and are commonly used in Europe as none have been universally accepted to date. ... In the United States and Canada, the product standard (Standard for Performance-Rated Cross-Laminated Timber - ANSI/APA PRG 320) has adopted the Shear Analogy method to derive composite bending and shear stiffness properties.
Online Access
Free
Resource Link
Less detail

Chapter 4: Seismic Performance of Cross-Laminated Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue810
Year of Publication
2011
Topic
Seismic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Walls
Wood Building Systems
Author
Marjan Popovski
Erol Karacabeyli
Ario Ceccotti
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Walls
Wood Building Systems
Topic
Seismic
Mechanical Properties
Keywords
Nails
National Building Code of Canada
Screws
Seismic Performance
Quasi-Static Test
Steel Brackets
Hold-Down
R-factor
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Cross-laminated timber (CLT) is an innovative wood product that was first developed some 20 years ago in Austria and Germany and ever since has been gaining popularity in residential and non-residential applicationsin Europe. European experience shows th...
Online Access
Free
Resource Link
Less detail

Chapter 6: Duration of Load and Creep Factors for Cross-Laminated Timber Panels

https://research.thinkwood.com/en/permalink/catalogue812
Year of Publication
2011
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Ciprian Pirvu
Erol Karacabeyli
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Creep
Duration of Load
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Cross-laminated timber (CLT) products are used as load-carrying slab and wall elements in structural systems, thus load duration and creep behaviour are critical characteristics that should be taken into account in design. Given the nature of CLT with or...
Online Access
Free
Resource Link
Less detail

Chapter 6: Duration of Load and Creep Factors for Cross-Laminated Timber Panels

https://research.thinkwood.com/en/permalink/catalogue825
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Ciprian Pirvu
Bradford Douglas
Borjen Yeh
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Creep
Duration of Load
Time Dependent Behavior
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
Cross-laminated timber (CLT) products are used as load-carrying slab and wall elements in structural systems, thus load duration and creep behavior are critical characteristics that must be addressed in structural design. Given its lay-up construction with orthogonal arrangement of layers bonded with structural adhesive, CLT is more prone to time-dependent deformations under load (creep) than other engineered wood products such as structural glued-laminated timber. Time dependent behavior of structural wood products is addressed in design standards by load duration factors that adjust design properties. Since CLT has been recently introduced into the North American market, the current design standards and building codes do not specify load duration and creep adjustment factors for CLT. Until this can be rectified, an approach is proposed in this Chapter for adopter of CLT systems in the United States. This includes not only load duration and service factors, but also an approach to accounting for creep in CLT structural elements.
Online Access
Free
Resource Link
Less detail

Chapter 10: Building Enclosure Design for Cross-Laminated Timber Construction

https://research.thinkwood.com/en/permalink/catalogue829
Year of Publication
2013
Topic
Design and Systems
Moisture
Material
CLT (Cross-Laminated Timber)
Application
Roofs
Walls
Author
Samuel Glass
Jieying Wang
Steve Easley
Graham Finch
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Roofs
Walls
Topic
Design and Systems
Moisture
Keywords
Airflow
Climate
Heat
Moisture Control
Building Enclosure
Exterior Walls
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
Abstract
Cross-laminated timber (CLT) was developed in Europe for the prefabricated construction of wall, roof, and flooring elements. Adaption of CLT for use in the United States requires consideration of the different climates, building codes, and construction methods in this country. ... This Chapter provides guidance on hear, air, and moisture control in wall and roof assemblies that utilize CLT panels in U.S. climate zones. The overarching strategies are to prevent wetting of CLT panels by using drained wall systems, to control airflow using an air barrier on the exterior of the CLT panels, to place rigid insulation to the exterior of the panels, to prevent moisture from accumulating within the panels, and to allow the panels to dry should they get wet. In certain climates, preservative treatment of CLT is recommended to provide additional protection against potential hazards such as decay and termites. ...
Online Access
Free
Resource Link
Less detail

Chapter 10: Building Enclosure Design of Cross-Laminated Timber Construction

https://research.thinkwood.com/en/permalink/catalogue816
Year of Publication
2011
Topic
Serviceability
Moisture
Material
CLT (Cross-Laminated Timber)
Application
Walls
Author
Graham Finch
Dave Ricketts
Jieying Wang
Constance Thivierge
Paul Morris
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Walls
Topic
Serviceability
Moisture
Keywords
Airflow
Climate
Heat
Insulation
Moisture
North America
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Cross-laminated timber (CLT) has become popular in Europe for the prefabricated construction of wall, roof and flooring elements. The use of CLT in North America is gaining interest in both the construction and wood industries. Several North American man...
Online Access
Free
Resource Link
Less detail

10 records – page 1 of 1.