Skip header and navigation

10 records – page 1 of 1.

Analysis of the Timber-Concrete Composite Systems with Ductile Connection

https://research.thinkwood.com/en/permalink/catalogue113
Year of Publication
2013
Topic
Mechanical Properties
Material
Timber-Concrete Composite
Application
General Application
Author
Chao Zhang
Organization
University of Toronto
Year of Publication
2013
Country of Publication
Canada
Format
Thesis
Material
Timber-Concrete Composite
Application
General Application
Topic
Mechanical Properties
Keywords
Bending
Ductility
Model
Load Deflection
Tension
Shear Connection
Language
English
Research Status
Complete
Online Access
Free
Resource Link
Less detail

Bending Beams Made of Cross Laminated Timber with Load in Board Plane

https://research.thinkwood.com/en/permalink/catalogue1143
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Beams

Bending Tests on Glued Laminated Timber Beams with Well-Known Material Properties

https://research.thinkwood.com/en/permalink/catalogue186
Year of Publication
2013
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Beams

Chapter 3: Structural Design of Cross-Laminated Timber Elements

https://research.thinkwood.com/en/permalink/catalogue822
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Loren Ross
Sylvain Gagnon
Edward Keith
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Flexural Properties
Modulus of Rupture
Shear
Stiffness
Strength
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
Building using cross-laminated timber (CLT) began in Europe about two decades ago and has used a variety of methods for structural analysis. Experimental testing methods were the most accurate, yet they lacked versatility because changes in lay-up, material, or even manufacturing methods could cause a need for new testing. Consequently, three analytical approaches have been created and are commonly used in Europe as none have been universally accepted to date. ... In the United States and Canada, the product standard (Standard for Performance-Rated Cross-Laminated Timber - ANSI/APA PRG 320) has adopted the Shear Analogy method to derive composite bending and shear stiffness properties.
Online Access
Free
Resource Link
Less detail

Chapter 6: Duration of Load and Creep Factors for Cross-Laminated Timber Panels

https://research.thinkwood.com/en/permalink/catalogue825
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Ciprian Pirvu
Bradford Douglas
Borjen Yeh
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Creep
Duration of Load
Time Dependent Behavior
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
Cross-laminated timber (CLT) products are used as load-carrying slab and wall elements in structural systems, thus load duration and creep behavior are critical characteristics that must be addressed in structural design. Given its lay-up construction with orthogonal arrangement of layers bonded with structural adhesive, CLT is more prone to time-dependent deformations under load (creep) than other engineered wood products such as structural glued-laminated timber. Time dependent behavior of structural wood products is addressed in design standards by load duration factors that adjust design properties. Since CLT has been recently introduced into the North American market, the current design standards and building codes do not specify load duration and creep adjustment factors for CLT. Until this can be rectified, an approach is proposed in this Chapter for adopter of CLT systems in the United States. This includes not only load duration and service factors, but also an approach to accounting for creep in CLT structural elements.
Online Access
Free
Resource Link
Less detail

Cross Laminated Timber – Properties and Use for Building Purposes: A Review from the Experience of Swiss Researchers

https://research.thinkwood.com/en/permalink/catalogue23
Year of Publication
2013
Topic
Mechanical Properties
General Information
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Peter Niemz
Walter Sonderegger
Publisher
Transilvania University Press Brasov
Year of Publication
2013
Country of Publication
Romania
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
General Information
Keywords
Physical Properties
MOE
Bending Strength
Building Applications
Language
English
Romanian
Research Status
Complete
Series
Pro Ligno
ISSN
2069-7430
Online Access
Free
Resource Link
Less detail

Cross-Laminated Timber Under In-Plane Bending Stress

https://research.thinkwood.com/en/permalink/catalogue973
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application

Development of Evaluation Methodology for Rolling Shear Properties in Cross Laminated Timber (CLT)

https://research.thinkwood.com/en/permalink/catalogue137
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Beams

Experimental Analysis of the Structural Behavior of Timber-Concrete Composite Slabs Made of Beech-Laminated Veneer Lumber

https://research.thinkwood.com/en/permalink/catalogue611
Year of Publication
2013
Topic
Connections
Mechanical Properties
Material
Timber-Concrete Composite
LVL (Laminated Veneer Lumber)
Application
Floors
Author
Lorenzo Boccadoro
Andrea Frangi
Publisher
American Society of Civil Engineers
Year of Publication
2013
Country of Publication
United States
Format
Journal Article
Material
Timber-Concrete Composite
LVL (Laminated Veneer Lumber)
Application
Floors
Topic
Connections
Mechanical Properties
Keywords
Beech
Spruce
Load Carrying Capacity
Structural Behavior
Failure Modes
Notch Connections
Language
English
Research Status
Complete
Series
Journal of Performance of Constructed Facilities
Abstract
Composite, timber-concrete slabs as structural floor systems for office and residential buildings, offer several technical advantages over traditional, exclusively timber floors. The connection between timber and concrete in current systems made of spruc...
Online Access
Free
Resource Link
Less detail

Experimental Investigation of Connection for the FFTT, A Timber-Steel Hybrid System

https://research.thinkwood.com/en/permalink/catalogue269
Year of Publication
2013
Topic
Connections
Design and Systems
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Hybrid Building Systems

10 records – page 1 of 1.